• 한국환경과학회지
• /
• 제18권6호
• /
• pp.595-601
• /
• 2009

The effects of the cation-to-anion resin ratio and bed depth on ion exchange performance of mixed-bed were studied at ultralow solution concentration. Breakthrough curves were experimentally obtained for NaCI solution as functions of resin ratio and bed depth. The bed depth affects the pattern of the sodium breakthrough curve but not the chloride breakthrough curve in beds because of the selectivity difference. Resin selectivity determines the shape of breakthrough curves, Some sodium and chloride breakthrough curves crossed at a point as a function of resin ratio. The lower cation-to-anion resin ratio showed the higher effluent concentration or treated volume of the crossover point regardless of the total resin weight.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1075-1079
• /
• 2001

The R-curve for in situ-toughened SiC-30 wt% TiC composites was estimated by the indentation-strength method and compared to that of monolithic SiC with toughened microstructure. Both materials exhibited rising R-curve behavior. The SiC-TiC composites, however, displayed better damage tolerance and higher resistance to crack growth. Total volume fractions of SiC key grains, which take part in toughening mechanisms such as crack bridging and crack deflection, were 0.607 for monolithic SiC ceramics and 0.614 for SiC-TiC composites. From the microstructural characterization and the residual stress calculation, it was inferred that this superior performance of SiC-TiC composites can be attributed to stress-induced microcracking at heterophase (SiC/TiC) boundaries and some contribution from carck deflection by TiC grains.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.131-138
• /
• 2000

This paper works on development of an algorithm for mapping of cerebral perfusion parameters using the gamma-variate curve fitting. The signal intensity variate curve according to time measured in each pixel of perfusion MRI is nonlinear, and various hemodynamic parameters are not computed accurately. Levenberg-Marquardt algorithm(LMA), nonlinear optimum algorithm with high convergent speed and stability, is used to compute them. That is, the signal intensity variate curve is fitted by the gamma-variate function. Various hemodynamic parameters - Cerebral Blood Volume(C.B.V), Mean Transit Time(M.T.T), Cerebral Blood Flow(C.B.F), Time-to-Peak(T.T.P), Bolus Arrival Time(B.A.T), Maximum Slope(M.S) - are computed using LMA.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.137-146
• /
• 1999

The SSI(Soil-Structure Interaction) analyses are being performed for the KNGR(Korean Next Generation Reactor) design because the KNGR is developed as a standard nuclear power plant concept enveloping various soil conditions. the SASSI program which adopts the flexible volume method is used for the SSI analyses. The soil curves used in the three dimensional SSI analyses of KNGR Nuclear Island(NI) structures are based on the upper bound shear modulus curve and lower bound damping degradation on SSI response the average shear modulus curve with average damping curve was used for two soil cases. This study presents the results of the variances by using different soil nonlinearity parameters based on the paametric SSI analyses. The results include the maximum member forces(shear and axial force) at the base of the NI structures and the 5% damping Floor Response Spectra (FRS) at some representative locations at the top of the NI superstructures. They are also compared together with the enveloped SSI results for eight soil cases and fixed-base analysis for rock case by using two control motions.

• Computers and Concrete
• /
• 제10권1호
• /
• pp.19-33
• /
• 2012

The performance of a concrete is significantly influenced by its mixture proportion and the coating thickness on aggregate surface. The concrete in this study is designed by estimating the blending ratio of aggregate using a densified mixture design algorithm (DMDA) based on an ideal grading curve and estimating the paste volume as the sum of the amount of paste needed to provide an assigned coating paste thickness. So as to obtain appropriate concrete amount, and thus can accurately estimate the property of concrete. Deduction of this mix design formula is simple and easy understanding, and meanwhile to obtain result is fast. This estimation model of mix design is expected to reward to industry and effectively upgrade concrete quality.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.237-240
• /
• 2004

High strain-rate deformation behavior of NiAl/Ni micro-laminated composites was characterized by split hopkins on pressure bar(SHPB). When the strain rate increased, the compressive stress of micro-laminated composites were increased a little. When the intermetallic volume fraction increased, the compressive stress of micro-laminated composites increased linearly irrespective of strain rate. Absorbed energy during the quasi-static and SHPB tests was calculated from the integrated area of stress-strain curve. Absorbed energy of micro-laminated composites deviated from the linearity in terms of the intermetallic volume fraction but merged to the value of intermetallic as the strain rate increased. This was due to high tendency of intermetallic layer for the localization of shear deformation at high strain rate. Microstructure showing adibatic shear band(ASB) confirmed that the shear strain calculated from the misalignment angle of each layer increased and ASB width decreased when the intermetallic volume fraction. Simulation test impacted by tungsten heavy alloy cylinder resulted that the absorbed energies multiplied by damaged volume of micro-laminated composites were decreased as the intermetallic volume fraction increased. Fracture mode were changed from delamination to single fracture when the intermetallic volume fraction and this results were good matched with previous results[l] obtained from the fracture tests.

• 대한두경부종양학회지
• /
• 제27권1호
• /
• pp.27-31
• /
• 2011

Purpose : Anterolateral thigh and radial forearm flap is the most important fasciocutaneous flap widely used for reconstruction of tongue. One important purpose of flap is replacing the volume of tongue but still there is no data about the surface area and volume to be reconstructed after glossectomy. In this paper, surface area and volume is estimated from the 3-dimensionally reconstructed MRI images to see which flap is more ideal and to give the reference value for reconstruction. Materials and Methods : With coronal MRI image, tongue including only the intrinsic muscle is delineated in every section and reconstructed 3-dimensionally and calculated the volume and surface area to be reconstructed according to the degree of glossectomy. This volume and surface area was compared with the volume of anterolateral thigh and radial forearm flap. Results : The volume and surface area to be reconstructed in hemiglossectomy was $39.0{\pm}4.0cm^3$ and $31.8{\pm}2.7cm^2$ respectively. The average thickness of anterolateral thigh flap is $9.4{\pm}2.8mm$ and that of radial forearm is $3.8{\pm}1.0mm$. Comparing the curve of tongue surface area and volume with the volume of flap, the anterolateral thigh flap has more ideal volume to replace the defect. Conclusions : The surface area and volume requested for reconstruction could be suggested and the anterolateral thigh flap has more ideal volume for reconstruction of glossectomy defect.

• Tuberculosis and Respiratory Diseases
• /
• 제42권3호
• /
• pp.387-393
• /
• 1995

경도의 기관지 천식과 기관지염으로 오인된 기관내 선양낭성암종 2예를 기류유량곡선으로 진단하였기에 문헌고찰과 함께 보고하는 바이다.

• 한국지반공학회논문집
• /
• 제21권2호
• /
• pp.17-26
• /
• 2005

함수특성곡선은 불포화지반에서의 해석과 물성 추정 등에 반드시 고려해야 하는 지반의 고유 특성이다. 하지만 기존의 실험장비에 의한 실험 중에 발생되는 시료의 부피변화는 함수특성곡선 결과에 영향을 비치게 된다. 따라서 본 연구에서는 함수특성곡선 실험 중에 발생되는 부피변화를 측정하여 보다 정확한 함수특성곡선을 얻고자 하였다. 그리고 실험과정 중에 관측된 간극비의 변화를 통해 실험 초기의 포화과정이 시료의 구조를 변화시키고 있음을 알 수 있었다. 따라서 본 연구에서는 기존의 설험방법으로 실험을 수행한 시료에 대해 실험 초기의 포화과정을 생략한 실험을 수행하여 간극비의 변화가 상대적으로 크게 감소하는 것을 알 수 있었으며, 그 결과들을 비교, 분석하였다.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.525-536
• /
• 2014

In this paper, GUI program for microspeaker system simulation program was developed and verified through closed box, vent box and 6th order bandpass enclosure system. By using the pseudo loudspeaker model concept, TS parameters and rear volume of microspeaker were identified. Their suitabilities were proved by comparing test results with simulations of electrical impedance and sound pressure response curves for the three box types; closed box, vent box and 6th order bandpass box. Also, MSSP was found to be effective regardless of the microspeaker's shape, either circular or rectangular shape. MSSP can be used for the microspeaker system simulation, and can give a general prediction of such as; sound pressure level curve, electrical impedance, diaphragm velocity and displacement curve according to multiple design parameters; diaphragm mass, compliance, force factor, front and rear volume, front and rear port's diameter and length.