• 제목/요약/키워드: Volatile solid

검색결과 396건 처리시간 0.021초

Low Temperature Effects on the Nitrification in a Nitrogen Removal Fixed Biofilm Process Packed with SAC Media

  • Jang, Se-Yong;Byun, Im-Gyu
    • 한국환경과학회지
    • /
    • 제22권1호
    • /
    • pp.1-6
    • /
    • 2013
  • A fixed biofilm reactor system composed of anaerobic, anoxic(1), anoxic(2), aerobic(1) and aerobic(2) reactor was packed with synthetic activated ceramic (SAC) media and adopted to reduce the inhibition effect of low temperature on nitrification activities. The changes of nitrification activity at different wastewater temperature were investigated through the evaluation of temperature coefficient, volatile attached solid (VAS), specific nitrification rate and alkalinity consumption. Operating temperature was varied from 20 to $5^{\circ}C$. In this biofilm system, the specific nitrification rates of $15^{\circ}C$, $10^{\circ}C$ and $5^{\circ}C$ were 0.972, 0.859 and 0.613 when the specific nitrification rate of $20^{\circ}C$ was assumed to 1.00. Moreover the nitrification activity was also observed at $5^{\circ}C$ which is lower temperature than the critical temperature condition for the microorganism of activated sludge system. The specific amount of volatile attached solid (VAS) on media was maintained the range of 13.6-12.5 mg VAS/g media at $20{\sim}10^{\circ}C$. As the temperature was downed to $5^{\circ}C$, VAS was rapidly decreased to 10.9 mg VAS/g media and effluent suspended solids was increased from 3.2 mg/L to 12.0 mg/L due to the detachment of microorganism from SAC media. And alkalinity consumption was lower than theoretical value with 5.23 mg as $CaCO_3$/mg ${NH_4}^+$-N removal at $20^{\circ}C$. Temperature coefficient (${\Theta}$) of nitrification rate ($20^{\circ}C{\sim}5^{\circ}C$) was 1.033. Therefore, this fixed film nitrogen removal process showed superior stability for low temperature condition than conventional suspended growth process.

Solid Phase Microextraction을 이용한 계피의 향기성분 분석 (Analysis of Aroma Compounds of Cinnamon by Solid Phase Microextraction)

  • 이창국;이재곤;장희진;곽재진
    • 한국식품영양학회지
    • /
    • 제16권4호
    • /
    • pp.372-378
    • /
    • 2003
  • SDE 및 SPME를 이용하여 계피로부터 추출한 휘발성 향기성분을 GC/MSD 분석한 결과 terpenes 20종, alcohol 3종, carbonyl 5종, esters 2종으로 총 30개의 휘발성 성분을 확인하였다. 이들 중 trans-cinnamaldehyde (86.4%), cis-cinnamaldehyde(0.9%), hydrocinnamaldehyde (0.1%) 등의 carbonyl 화합물이 peak area% 기준으로 약 88.2%로 계피 중 대부분을 차지하는 것으로 나타났다. 또한 식물체의 향기성분 분석에 많이 이용되는 SPME fiber 4종류를 비교 분석한 결과 terpen류 화합물들은 PDMS fiber에서 추출효율이 가장 좋았으며, cinnamyl alcohol과 같은 다소 극성인 화합물의 경우 DVB/CAR/PDMS fiber와 PA fiber에서 추출 효율이 가장 좋은 것으로 나타났다. SPME법에서 최적 조건을 설정하기 위해 추출온도와 추출시간을 달리하면서 비교 분석한 결과 copaene, murolene, cadinene, cis-cinnamaldehyde 등의 area% 값은 온도와 시간이 커질수록 증가한 반면에 trans-cinnamaldehyde의 area% 값은 감소하였다.

Solid-Phase Microextraction(SPME)을 이용한 감식초의 휘발성 성분 분석 (Volatile Components in Persimmon Vinegars by Solid-Phase Microextraction)

  • 서지형;박난영;정용진
    • 한국식품과학회지
    • /
    • 제33권1호
    • /
    • pp.153-156
    • /
    • 2001
  • 2단계 발효로 제조한 감식초를 static headspace-GC법과 SPME-GC법으로 휘발성 성분을 각각 포집 분석하여 상호간의 특성에 대해 조사하였다. 감식초의 휘발성 성분 포집조건은 $80^{\circ}C$에서 20분간으로 설정하였으며, 감식초 휘발성 성분의 total FID response는 CW/DVB fiber를 이용한 SPME법에서 total peak area $18.18{\times}10^6$로, static headspace-GC법의 total peak area $1.35{\times}10^6$보다 현저하게 높았다. 감식초의 주된 휘발성 성분으로 acetic acid, ethyl acetate, 3-hydroxy-2-butanone, ethanol, phenethyl alcohol 등이 확인되었으며, static headspace-GC법에서는 acid류 3종, aldehyde류 3종, alcohol류 5종, ester류 8종 및 ketone류 1종이 확인되었다. SPME-GC법에서는 acid류 6종, aldehyde류 7종, alcohol류 6종, ester류 9종, hydrocarbone류 2종, ketone류 1종, 기타 3종으로, 총 34종의 휘발성 성분이 확인되었으며, benzaldehyde, phenethylacetate, phenethylalcohol 등의 비율이 headspace-GC법에 비해 높았다.

  • PDF

고상 미량 추출 장치(SPME, solid phase micro-extraction device)를 이용한 물 중의 THM(trihalomethane) 분석 (Determination of THM(trihalomethane) in Rain by using Solid Phase Micro-Elctraction(SPME) Fiber Assembly)

  • 유광식;박상윤
    • 한국환경과학회지
    • /
    • 제6권3호
    • /
    • pp.277-283
    • /
    • 1997
  • SPME deuce was applied to determine the THM in an aqueous solution. The 6 kinds of THM was quantitatively detenuned by using GC-ECD which has the sample eutracted on the SPME fiber from an aqueous solution for 10 min. The THM components were well separated from $CHCl_3$ to the last $CHBr_3$ UHh 13 mons at the condition. 6 kinds of the volatile halogenated organic compounds: $CHCl_3$, $CHBrCl_2$, $CHBrtCl_2$, $CHCl_3$, $C_2Cl$. and $CHBr_3$, showed well defirled calibration graph with good llnearlty from a few ppb level up to several tens of pub concentration. $CHBr_2Cl$ and $C_2C1_4$ were detected from a few samples among the 10 of river samples. CHCl3, however, was detected In 4 sea water samples with the highest of 10 ppd among the pouuted 6 positions. Trace level of $CHBr_2Cl$ and few pub level of $CHBr_3$ were also detected at the other two sample stations. Most of the 13 rain water samples collected from 6 sampling stations were contained ppd level of $CHCl_3$, and also $CHBr_2Cl$, and C_2Cl_4$ were only detected at trace level at a few rain samples among them. We could recognize the fact that our Ut and water enoronment has already been contaminated by certain volatile halogenated organic compounds through this study.

  • PDF

우리나라 다목적 Dam 운영의 문제점과 개선방안 (Problem and Optimum Operational Strategy of Multipurpose Reservoir in Korea)

  • 심순보
    • 기술사
    • /
    • 제19권1호
    • /
    • pp.25-32
    • /
    • 1986
  • The number of visiters to Bukhan Mt. national park, generation quantity of solid waste and collection system were researched to consider a counterplan for the pollution control of the national park and study for developing the effective treatment of solid waste was tried through the proximate analysis of each component containing. Results obtained in this study were summerized as follows; The great part of visitors go on an excursion to the Bukhan Mt. national park during July and August and also, the solid waste was generated nearly a half of the total amount at the same period. The major collection facilities in the national park were waste basket and incineration box. But the incineration box was too large in volume and very far in distance, and its collection period was irregular, so it was cause to the congestion of solid waste and bad smell and dirty. Therefore, to complete collection of solid waste, we must set up the waste basket which able to find within 40~50m from the origination place of solid waste and induce the visitors to throw the solid waste. It was obtained as moisture content: 48.5 wt%, volatile solid: 28.4wt%, fixed solid: 23.1 wt%, lower heating value: 1,320kca1/kg from experimental analysis of solid waste. According to this analysis, the incineration operation is possible, but the generation quantity of solid waste was too small to construct incineration plant for heat recovery. It was found that it is suitable for the aerobic composting by mixing with the night soil which generate in the national park after the recovery of resources such as metals, glasses and plastics.

  • PDF

Volatile compounds and some physico-chemical properties of pastırma produced with different nitrate levels

  • Akkose, Ahmet;Unal, Nazen;Yalinkilic, Baris;Kaban, Guzin;Kaya, Mukerrem
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권8호
    • /
    • pp.1168-1174
    • /
    • 2017
  • Objective: The aim of the study was to evaluate the effects of different nitrate levels (150, 300, 450, and 600 ppm $KNO_3$) on the volatile compounds and some other properties of pastırma. Methods: Pastırma samples were produced under the controlled condition and analyses of volatile compounds, and thiobarbituric acid reactive substances (TBARS) as an indicator of lipid oxidation, non-protein nitrogenous matter content as an indicator of proteolysis, color and residual nitrite were carried out on the final product. The profile of volatile compounds of pastırma samples was analyzed by gas chromatography/mass spectrometry using a solid phase microextraction. Results: Nitrate level had a significant effect on pH value (p<0.05) and a very significant effect on TBARS value (p<0.01). No significant differences were determined in terms of $a_w$ value, non-protein nitrogenous substance content, color and residual nitrite between pastırma groups produced by using different nitrate levels. Nitrate level had a significant (p<0.05) or a very significant (p<0.01) effect on some volatile compounds. It was determined that the amounts and counts of volatile compounds were lower in the 450 and especially 600 ppm nitrate levels than 150 and 300 ppm nitrate levels (p<0.05). While the use of 600 ppm nitrate did not cause an increase in residual nitrite levels, the use of 150 ppm nitrate did not negatively affect the color of pastırma. However, the levels of volatile compounds decreased with an increasing level of nitrate. Conclusion: The use of 600 ppm nitrate is not a risk in terms of residual nitrite in pastırma produced under controlled condition, however, this level is not suitable due to decrease in the amount of volatile compounds.

추출방법에 따른 잎담배 종류별 휘발성 향기성분 특성비교 (Comparison of the volatile flavor compounds in different tobacco types by different extraction methods)

  • 이장미;이정민;이창국;복진영;황건중
    • 한국연초학회지
    • /
    • 제32권2호
    • /
    • pp.77-87
    • /
    • 2010
  • Traditional simultaneous distillation extraction(SDE) and solid-phase micro extraction(SPME) methods using GC/MS were compared for their effectiveness in the extraction of volatile flavor compounds from different tobacco leaves types(flue-cured, burley, oriental). The major volatile flavor compounds of flue-cured and burley tobacco were similar such as neophytadiene, solanone, megastigmatrienone isomers, ${\beta}$-damascenone and ${\beta}$-ionone. On the other hand, volatile flavor compounds such as norambreinolide, sclareolide were specifically identified in oriental tobacco. Each method was used to evaluate the responses of some analytes from real samples and standards in order to provide sensitivity comparisons between two techniques. Among three types of SPME fibers such as PDMS(Polydimethylsiloxane), PA(Polyacrylate) and PDMS/DVB (Polydimethylsiloxane/Divinylbenzene) which were investigated to determine the selectivity and adsorption efficiency, PDMS/DVB fiber was selected for the extractions of the volatile flavor compounds due to its effectiveness. The qualitative analysis showed that the total amount of volatile flavor compounds in SDE method(130 species) was much more than that in SPME method(85 species). SPME method was more efficient for all the highly volatile compounds than SDE method, but on the other hand, low-volatile compounds such as fatty acids or high-molecular hydrocabons were detected in SDE method. SPME method based on a short-time sampling can be adjusted to favor a selected group compounds in tobacco. Furthermore this results could be used to estimate the aroma characteristics of cigarette blending by using a different type of tobacco with more effectiveness and convenience.

부산시 하천퇴적물의 유기 오염도 평가 (Evaluation of Organic Sediments Qualities for the Urban Streams in the Busan City)

  • 이준기;김석구;송재홍;이태윤
    • 대한환경공학회지
    • /
    • 제31권11호
    • /
    • pp.975-982
    • /
    • 2009
  • 본 연구는 부산시에 위치한 하천들에 대한 기본적인 퇴적물 데이터와 현재의 오염상태에 대한 정보를 제공하기 위한 목적으로 수행되었다. 먼저 부산시 하천중 14곳을 선정하고 대상하천의 퇴적물을 채집하였다. 그리고 퇴적물특성을 알아보기 위해 퇴적물의 화학적산소요구량, 강열감량, 유기탄소, 원소분석을 실시하였고 그 결과 퇴적물의 화학적산소요구량, 강열감량, 유기탄소, 총질소 함량이 각각 1.20~75.07 mg/L, 0.19~11.54 %, 0.23~34.21%, 0.76~3.46%로 나타났다. 퇴적물의 분석 데이터를 각각 USEPA 퇴적물 환경기준과 캐나다 온타리오 퇴적물 환경기준과 비교해 본 결과, COD, 강열감량, 총유기탄소 값으로 평가했을 경우 보수천과 구덕천이 다른 하천에 비해 상대적으로 심하게 오염된 것으로 평가되었지만 총질소 값으로 비교해 본 결과 결과적으로 모든 하천이 심한 오염상태인 것으로 평가 되었다. 최종적으로 퇴적물COD와 수분함량, 회분함량, 강열감량, 유기탄소량, 총질소, 총인과의 상관관계를 알아보기 위해 Linear 모델에 최소자승법을 적용해 fitting 하였고 그 결과 모든항목에서 퇴적물COD와 높은 상관관계 (r=0.9664~0.8501)를 띔을 알 수 있었다.

BMP(Biochemical Methane Potential) test를 통한 도심하천 퇴적물의 최종메탄발생수율 및 생분해도 산정 (Estimation of Ultimate Methane Yields and Biodegradability from Urban Stream Sediments Using BMP Test)

  • 송재홍;김석구;이준기;고태훈;이태윤
    • 한국지반환경공학회 논문집
    • /
    • 제11권2호
    • /
    • pp.33-42
    • /
    • 2010
  • 본 연구는 부산시에 위치한 하천퇴적물에 대한 현재의 오염상태와 혐기성 상태에서의 잠재메탄발생량을 평가하기 위해 실시하였다. 먼저 부산시 하천중 총 5곳을 선정하였고 대상하천의 퇴적물을 채집하였다. 그리고 퇴적물특성을 알아보기 위해 퇴적물의 화학적산소요구량, 강열감량, 총 유기탄소에 대해서 분석을 실시하였고 그 결과 각각 15.20~75.07mg $15.20{\sim}75.07mg\;g^{-1}$, 2.34~11.54%, 1.28~34.21%로 나타났다. 또한 실험실규모의 BMP Test를 실시하였고 그 결과 pH가 약간 증가하다가 약 7.11~7.35에서 평형을 이루었으며, C/N, 최종메탄 및 이산화탄소수율 그리고 생분해도는 각각 1.05~10.27, 10.1~179.4, 10.3~34.4, 4.0~30.1을 나타내었다. 그리고 최종메탄수율과 C/N비, 최종이산화탄소수율, COD, 강열감량, 총유기탄소와의 상관관계를 알아보기 위해 선형모델에 최소자승법을 적용해 평가하였고 그 결과, COD($r^2=0.7586$)와 강열감량($r^2=0.7876$)을 제외한 나머지 모든 항목에서 최종메탄수율과 높은 상관관계를 띔을 알 수 있었다($r^2=0.9795{\sim}0.9858$). 따라서 C/N 또는 TOC 분석결과를 통해 메탄발생수율을 예측 가능할 것으로 판단된다.

초피 Oleoresin 제조시 용매에 따른 추출물특성과 추출조건에 따른 휘발성 성분 변화 (Properties of Chopi Oleoresin Extracted with Various Solvents and Effects of Extraction Conditions on Volatile Components)

  • 최용희;허상선;배동호;김상욱
    • 한국식품영양과학회지
    • /
    • 제27권3호
    • /
    • pp.406-412
    • /
    • 1998
  • Such extraction conditions as the kinds of solvent, extracting temperature, extracting time, ratio of material to solvent and particle size of material, were studied to maximize the extraction of oleoresin from chipi. Larger amount of soluble solids were extracted from seeds with nonpolar solvents (hexane, pentane, ether) for extraction, because the seeds contained large amount of crude fats and monoterpene(limonene) volatile compounds. Larger amount of soluble solids were extracted from peel with polar solvents(methanol, ethanol) of extraction because of large amount of water soluble colors, sugars and oxygenated terpene bolatile compounds in the peel. The application of the solvents in intermediate polarity (dichloromethane, acetone) resulted in more effective extraction of soluble solid and volatile compounds. Expecially, dichloromethane was an excellent solvent in extraction of volatile compounds. In the concern of volatile compound recovery yield, the optimum extraction conditions, such as temperature, time, mixing ratio of material to dichloromethane and mean particle size, were $25^{\circ}C$, 10min, 1:10(w/v), 355~250${\mu}{\textrm}{m}$ for chopi peels and 3$0^{\circ}C$, 10min, 1:8(w/v), 355~250${\mu}{\textrm}{m}$ for chopi seeds, respectively.

  • PDF