• 한국건축시공학회지
• /
• 제21권4호
• /
• pp.293-303
• /
• 2021

국내 PC공장은 PC 유공 슬래브를 생산하기 위해 자동화 설비를 도입하거나 매입물 삽입을 통해 중공 단면을 구현하지만 PC공장의 과다한 초기투자비용이 생산원가의 증가라는 주요 원인으로 작용하기에 다른 대안이 필요한 상황이다. 따라서 본 연구에서는 PC 유공 슬래브 부재 생산시 고무 튜브를 내부 속빈 공간을 형성하는 거푸집으로 사용함으로써 다양한 중공 형상의 성형 및 대단면화, 초경량화, 신속생산 대응 가능을 통한 생산성 확보에 기여하고자 한다.

• Geomechanics and Engineering
• /
• 제34권6호
• /
• pp.637-648
• /
• 2023

When an earth pressure balance (EPB) shield machine bores a tunnel in gravelly sand stratum, the excavated natural soil is normally transformed using foam and water to reduce cutter wear and the risk of direct muck squeezing out of the screw conveyor (i.e., muck spewing). Understanding the undrained shear behavior of conditioned soils under pressure is a potential perspective for optimizing the earth pressure balance shield tunnelling strategies. Owing to the unconventional properties of conditioned soil, a pressurized vane shear apparatus was utilized to investigate the undrained shear behavior of foam-conditioned gravelly sands under normal pressure. The results showed that the shear stress-displacement curves exhibited strain-softening behavior only when the initial void ratio (e₀) of the foam-conditioned sand was less than the maximum void ratio (e_max) of the unconditioned sand. The peak and residual strength increased with an increase in normal pressure and a decrease in foam injection ratio. A unique relation between the void ratio and the shear strength in the residual stage was observed in the e-ln(τ) space. When e₀ was greater than e_max, the fluid-like specimens had quite low strengths. Besides, the stick-slip behavior, characterized by the variation coefficient of measured shear stress in the residual stage, was more evident under lower pressure but it appeared to be independent of the foam injection. A comparison between the results of pressurized vane shear tests and those of slump tests indicated that the slump test has its limitations to characterize the chamber muck fluidity and build the optimal conditioning parameters.

• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.93-100
• /
• 2004

In recent years, it has widely been studied on the light-weight composites for the purpose of the large space and thermal insulation of building structures. The purpose of this study is to evaluate the properties of light-weight composites made by binders as cement, resin and polymer cement slurry. The concrete composites are prepared with various conditions such as polymer-cement ratio, void-filling ratio, type of resin, filler content and light-weight aggregate content, tested for thermal conductivity. From the test results, the thermal conductivity of concrete composites with the binder of cement tends to decrease with increasing polymer-cement ratio, and to increase with increasing void-filling ratio. The thermal conductivity of concrete composites with the binder of resin are markedly affected by the light-weight aggregate content, type of resin and filler content. The composites made by polymer-modified concrete and polymer cement slurry have a good thermal insulation property. From the this study, we can recommend the proper mix proportions for thermal insulation Panel or concrete. Expecially. the thermal conductivity of concrete composites made by polyurethane resin is almost the same as that of the conventional expanded polystyrene resin.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제13권3호
• /
• pp.7-14
• /
• 2007

The concept and spatial composition of office have endlessly changed according to social trend. And according to social change, members of office, namely, concept of organization has been changed. Presently, our society finds and needs appearance of office suitable for our society. According to a concept of ecological environment and a concept laying stress on human, various trials have been performed but still, stress of salaried men is treated as social issue. By having connection between psychological healing theory of Max $L{\ddot{\bar{u}}}scher$ and spatial expression elements (content : refuge, self-esteem : prospect, confidence : flow, liberty : void) as a theory, we discussed possibility of aesthetic office landscape could be developed to a type of office which could control emotion that can be a cause of stress and we intended to examine limitation and possibility through case analysis.

• 한국의학물리학회지:의학물리
• /
• 제31권4호
• /
• pp.189-193
• /
• 2020

An MR-based attenuation correction (MRAC) map plays an important role in quantitative positron emission tomography (PET) image evaluation in PET/magnetic resonance imaging (MRI) systems. However, the MRAC map is affected by the magnetic field inhomogeneity of MRIs. This study aims to evaluate the characteristics of MRAC maps of physical phantoms on PET/MRI images. Phantom measurements were performed using the Siemens Biograph mMR. The modular type physical phantoms that provide assembly versatility for phantom construction were scanned in a four-channel Body Matrix coil. The MRAC map was generated using the two-point Dixon-based segmentation method for whole-body imaging. The modular phantoms were scanned in compact and non-compact assembly configurations. In addition, the phantoms were scanned repeatedly to generate MRAC maps. The acquired MRAC maps show differently assigned values for void areas. An incorrect assignment of a void area was shown on a locally compact space between phantoms. The assigned MRAC values were distorted using a wide field-of-view (FOV). The MRAC values also differed after repeated scans. However, the erroneous MRAC values appeared outside of phantom, except for a large FOV. The MRAC map of the phantom was affected by phantom configuration and the number of scans. A quantitative study using a phantom in a PET/MRI system should be performed after evaluation of the MRAC map characteristics.

• 한국실내디자인학회논문집
• /
• 제22호
• /
• pp.61-68
• /
• 2000

This paper illustrates what the reality of architectural concepts, materials, notions and phenomena are as central questions of contemporay space design. These issues form the goal of modern space design which should attain to the reality of an era when non-real values prevail. Despite the trends of an everchanging and ephemeral dominating quality in architecture for the last ten years, architects still aim to contruct everlasting space on earth. The trends of dematerialization in today's space design can be substantiated in spatial-temporal dimensions as follows. First of all, ephemeral architecture with concepts of hypothetical temporality, everchanging architecture in fluidity, and the transparent architecture with the floating and overlapping image can be analyzed in the dimension of 'time'. In terms of 'space', void quality for the expression of emptiness, neutral space by the simplified and summarized forms, expanded space through ambiguous boundaries and spatial repetition can becharacterized and also be intended strategies for lightness, state of flux, ambiguity, paradox etc., lead modern space design along that path. As this point, we need to pay attention to the so-called 'hypersurface' concept proposed by Stephen Perella. Hypersurface is a sort of cladding sheathing existence independent from the primary structure. With it, the integration between form and image can be achieved. Sometimes hypersurface can be a strategical screen for image projection, a cognitive receptor for surroundings as well as a catalyst for information and communication systems. When the situation dematerializes more and more as the years go on, the concept of hypersurface can be an inclusive method between the phenomenological form in architecture and its self recipient image. Permissive atmospheres created between them in contemporary space design and new paradigms emerged with digital technology will further reinforce the human space's dynamism.

• 한국실내디자인학회논문집
• /
• 제27권3호
• /
• pp.100-107
• /
• 2018

In order to overcome social exclusion and to integrate social housing, it is necessary to plan a communal space in urban collective housing so that residents can have belonging sense and community consciousness. In this study, it is necessary to consider the linkage between social integration and residential space, and to derive the characteristics of planning the collective housing for social integration. We analyzed the planning characteristics of MVRDV's communal spaces of collective housing and suggested a method of planning communal spaces of urban collective housing for social integration. Urban density is an important tool and background for MVRDV's design methodology. For this reason, MVRDV's collective housing is selected as a case study in this study. As a result of case analysis, openness and connection characteristics should be considered by using various devices such as glass exterior, balcony, and void in planning the communal space in urban collective housing for social integration. However, since it has appeared in many cases, it can be criticized that the application of this is merely a logic. In other words, it is possible to suggest that we should actively introduce less accessible access. This problem should be solved through more case studies.

• 한국실내디자인학회논문집
• /
• 제25호
• /
• pp.155-161
• /
• 2000

'Transparency', which has been an important topic of architectural discourse in the recent past, is playing an even greater role in architectural expression nowadays. The purpose of this study is to define the prevailing conceptions about transparency and to discover the various modes of this design effect in architectural space. By using partial or complete of transparency in a structure, designers are able to express themselves more profoundly. The perception between exterior and interior, transformation of day into night and conditions arising from spatial overlapping create an atmosphere which deepens the quickly of architectural design. Transparency can present as void what in reality is solid. Following the period of de-construction, transparency has asserts itself in late part of the century and transparency can be considered synonymous with modernistic and refers to structure that are optically luminant or pleasant in its simplicity. Along with advancement of climate control, construction and design technologies and new material with versatility should combine to even further the diversity of transparency in architectural expression.

• 천문학회지
• /
• 제38권1호
• /
• pp.1-6
• /
• 2005

We searched for X-ray emission from the 665 galaxies inside and towards the nearby voids by analyzing the ROSAT All-Sky Survey (RASS) data as well as the ROSAT pointed observations (PSPC). As a result we have detected six X-ray emitting galaxies. Two (UGC 10205 and NGC 7509) are in the high density region in the local void, three (UGC 749, MCG +11-10-073, and Mrk 464) are towards the nearby voids, and UGC 32 is located in the low density region. We carried out a timing analysis for both Mrk 464 and UGC 32, and a spectral analysis for Mrk 464. The light curve of Mrk 464 shows the possibility of periodic X-ray flux variation and UGC 32 shows weak, but rapid variation.

• 한국항공우주학회지
• /
• 제40권8호
• /
• pp.670-677
• /
• 2012

본 논문에서는 Biomorphic C/SiC 복합재료에 대하여 단위구조해석을 수행하였다. 소나무와 뉴송을 탄화하고 실리콘을 함침해 제조한 복합재료의 미세조직을 사각배열과 육각배열로 가정해 단위구조를 정의하고 등가물성치를 계산하였다. 단위구조의 크기가 동일하지 않은 경우도 고려하였고, 또한 공극의 배열에 따른 물성치의 변화를 몬테카를로 시뮬레이션을 통해 조사하였다.