• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.3
• /
• pp.97-103
• /
• 2000

This study was performed to prove that vitrified slag can be utilized as sound absorbing materials by investigating on heavy metal elution and the properties of sound absorbing rate according to the thickness. The heavy metal elution experiment indicated that heavy metal was not eluted since it was fixed stable in the slag. Vitrified slag generally exhibited a maximum sound absorbing rate around at 600Hz-1kHz and 3kHz in the low and high frequency range, respectively. On the other hand, the absorbing rate increased beyond the range of 7kHz again. The sound absorbing rate varied a little according to the thickness of the material. However, Vitrified slag is likely to the effective as a sound absorbing wall material since it has a sound absorbing rate clover 80% in the low and high frequency region when used as a wall. The results obtained in this study showed that vitrified slag has the recyclable material properties and therefore, highly applicable to sound absorbing materials.

• Journal of Conservation Science
• /
• v.34 no.4
• /
• pp.273-281
• /
• 2018

$Ji{\check{u}}di{\grave{a}}n$ iron production site in China is a relic smelting site, which in the past produced pig iron. In this study, scientific analysis of the smelting furnace and collected slag was conducted to reveal some aspects of the ancient Chinese smelting technique. A 3D model of the smelting furnace showed a narrow lower part and an upper section which increased in diameter upwards. Although the smelting furnace relic does not include the upper part and its complete shape cannot be predicted, the remaining part suggests that the furnace had a larger diameter in the central part compared to the upper and lower parts. Most of the collected slag was completely vitrified. Long prismatic fayalite was observed in the matrix of some samples. The iron particles contained phosphorus, which could not be discharged during smelting work. In addition, as the $CaO/SiO_2$ ratio was 0.42 or lower in the results of the content analysis, no CaO slag former had been added. However, the ratio of $CaO/SiO_2$ to $Al_2O_3/SiO_2$ did not have a constant trend. This needs to be investigated in a further study.

• Journal of Hydrogen and New Energy
• /
• v.22 no.5
• /
• pp.686-698
• /
• 2011

Mathematical models for char-slag interaction and near-wall particle segregation developed by Montagnaro et. al. were applied to predict various aspects of coal gasification in an up-flow entrained gasifier of commercial scale. For this purpose, some computer simulations were performed using gPROMS as the numerical solver. Typical design parameters and operating conditions of the commercial gasifiers were used as input values for the simulation. Development of a densely dispersed phase of solid carbon was found to have a critical effect on both carbon conversion and ash flow behavior. In general, such a slow-moving phase was turned out to enhance carbon conversion by lengthening the residence time of char or soot particles. Furthermore, it was also found that guiding the transfer of char or soot into the closer part of the wall to coal burner is favorable in terms of gasification efficiency and vitrified ash collection. Finally, to a certain degree densely dispersed phase of carbon showed an yield-enhancing effect of syngas.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.93-99
• /
• 2000

Treatment of shaving scrap, a chrome containing solid scrap generated by leather manufacturing process, has been so far depended on mainly incineration, soil landfill and ocean dumping, which give bad impact on environment and cause pollution. Shaving scrap generates from the mechanical work for controlling the final thickness of leather and its main components are collagen protein and pan of chromium compound. For the purpose of reusing this leather waste as resources, researches in connection with collagen fiber recovery, gelable protein recovery and liquid fertilizer is being speedily progressed. In the experiment, shaving scrap went through wet pulverizing treatment by physical and chemical methods. Then, making the leather sheet evenly, it is mixed with natural latex and every kind of binding materials in the container, and the mixtures were passed through experimental hydraulic press machine and applied to Fourdrinier machine respectively. Lastly, a test for fading out physical strength and properties of multiple-purpose of leather-like material was performed on a continuous leather sheet prepared by the experiment. In result, the physical strength and properties of leather-like material showed noticeable differences according to mixing ratio of binding materials, beating methods and the Ends of binding materials selected, and generally tear strength was the weakest property among others. Also, by the pilot scale experiment in sequence, it was possible to manufacture recycled goods made of soft and hard types of leather-like material with various performances.