• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.58-66
• /
• 2022

The high heat emitted from the process module and heat jacket may cause errors in semiconductor process equipment. Barriers were designed to reduce the temperature of surface on transfer module. A designed barrier was compared and analyzed by numerical analysis using ANSYS Fluent. The average temperature of barrier and effect of radiation heat transfer were also compared through absorbed radiative heat flux of the barrier. The adoption of the barrier had an effect on the radiative heat transfer reduction of the transfer module rod. The effect of the angles of barrier from 50° to 90° on the heat transfer was investigated using the absorbed radiative heat flux with the average temperature. The angle of barrier of 50° reduced the temperature up to 9.6 %.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.69-70
• /
• 2007

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.516-523
• /
• 2020

The normal low-cost manufacturing process for freeform vehicle side mirrors causes deviations from the design curvature. Here, an improved manufacturing process is proposed, combining photorealistic ray-traced visualization of each deviation and subsequent analysis of its deviated reflective scene compared to that of the original design. The proposed mechanism successfully highlights the overlap and mismatch regions of deviated reflected scenes with reference to the desired reflective scenes. We benchmarked the robustness of freeform mirror manufacturing by evaluating the 10, 20, and 30% root-mean-square (RMS) deviated curvature, and concluded that the acceptable deviation needs to be below RMS20% to avoid mismatched regions that could mislead the driver.

• Educational Technology International
• /
• 제7권1호
• /
• pp.21-37
• /
• 2006

This paper focuses on finding out visualization process by means of VTA(Visual Task Analysis) of expert teachers' simple task. Findings indicate teachers have coding schema of performing visual task as such; (a) the analyzing by reading and some activities in the task text, (b) conceptualizing or understanding in his/her own way, (c) the explaining of the action or product, (d) the searching by thinking or finding, (e) the decision of visualizing of the task. Expert teachers tried to visualize in the form of abstract graph, and to omit the object which was not directly related to the topic at the pilot study. VAT based on ground theory and protocol analysis was developed and performed. This case study suggests that an additional study for searching a guide and method might be beneficial for conducting a visual task analysis.

• Spatial Information Research
• /
• 제23권6호
• /
• pp.109-116
• /
• 2015

본 연구에서는 공간빅데이터의 개념과 특징을 정의하고 데이터에 대한 통찰력을 높일 수 있는 정보 시각화 방법론을 조사하였다. 또한 시각화 과정에서 발생할 수 있는 문제점 및 해결방법을 제시하였다. 공간빅데이터를 공간정보의 정량적인 확장의 결과와 빅데이터의 정성적인 확장의 결과로 정의하였다. 공간빅데이터는 6V(Volume, Variety, Velocity, Value, Veracity, Visualization)의 특징을 갖고 있으며, 최근 활용 서비스 측면이 이슈화 되면서 공간빅데이터에 대한 통찰력을 제공하여 데이터의 활용 가치를 높이기 위해 공간빅데이터의 시각화가 주목받고 있다. 정보 시각화의 방법은 Matthias, Ben, 정보디자인교과서 등을 통하여 다양한 방법으로 정의 되어 있으나 공간빅데이터의 시각화는 방대한 양의 원시 데이터를 대상으로 하기 때문에 데이터의 조직화 과정을 거쳐야 하며 이를 통해 사용자에게 전달하려는 정보를 추출해야 하는 차이점이 있다. 추출된 정보는 특성에 따른 적합한 시각적 표현 방법을 사용해야 하며, 많은 양의 데이터를 시각적으로 표현하는 것은 사용자에게 정확한 정보를 제공 할 수 없으므로 필터링, 샘플링, 데이터 비닝, 클러스터링 등을 이용하여 데이터를 축소하여 표현하는 방법이 필요하다.

• 한국가시화정보학회지
• /
• 제14권3호
• /
• pp.32-37
• /
• 2016

In this study, the mixing process of two distinct flow is numerically investigated. Two flow with different physical properties (resin and hardener) are mixed through the opposing mixing jets. At a high pressure mixing process, the high speed flow is provided by two in-line nozzles. In the case of numerical modeling, Reynolds-Averaged Navier-Stokes Equations (RANS) is conducted to model the flow pattern inside the chamber. Additionally, SST k-omega turbulence model is selected to predict the kinetic energy of flow in impingement zone. The results show that mixing of two distinct flows would be efficient if the velocity of jet is high enough and nozzle diameter is a predominant parameter. Also, this velocity would create higher shear stress between two distinct flows which increases the mixing quality as well as strength of formed vortices. Eventually, the histogram of concentration fraction of resin is examined in order to show the quality of mixing and the range of concentration fractions in the output of chamber.

• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1146-1152
• /
• 2011

Ink transfer process is very important to determine quality of printed pattern, therefore its mechanism should be understood to control printing quality. Although there have been many attempts to understand ink transfer mechanism by numerical simulation and experimental studies, their model was too much simple to model realistic printing process and our understanding is not enough yet. In this paper we designed ink transfer visualization system to present flow visualization of ink transfer process for gravure offset printing. We considered rotational effect of blanket roll which is related with printing speed and used non-Newtonian fluid as working fluid such as Ag paste. For printing unit, cantilever-type blanket roll is used for convenient visualization of ink transfer. Serial images were captured continuously by using high-speed CMOS camera and long range microscope. We investigated the effects of various design parameters such as printing speed and pattern angle on the ink transfer process. We found more stretched ink filament for non-Newtonian fluid than Newtonian fluid. As increasing printing speed, length of stretched ink filament and height of break-up point are also increased. We also compared ink transfer process between CD and MD pattern and its relationship with ink transfer mechanism.

• 한국멀티미디어학회논문지
• /
• 제6권2호
• /
• pp.332-339
• /
• 2003

경험적 탐색(Modem Heuristics) 방법을 이용하여 복잡한 문제들의 근사해를 구하는 것이 가능하여졌다. 최근 제시된 Particle Swarm Optimization은 경험적 탐색 방법중의 하나로써 조류나 어류 등의 생물의 무리가 각각의 개체가 가지고 있는 정보를 공유해가며 먹이를 찾아가는 과정을 모의한 것이다. 그러나, 다양한 문제들의 근사해를 구하기 위해 Particle Swarm Optimization 방법을 이용하여 왔지만 해를 탐색하는 과정을 보여주기 위한 시도는 이루어지지 않았다. 본 논문에서는 Particle Swarm Optimization의 탐색과정을 가시화 하는 것을 목적으로 한다. 가시화 하는 작업을 통해 그 탐색 능력을 시각적으로 파악하는 것이 가능하며 해결방법에 관한 이해를 돕고 교육적 효과도 기대 가능하다.

• 한국가시화정보학회지
• /
• 제1권2호
• /
• pp.13-16
• /
• 2003

LSPIV(Large Scale Particle Image Velocimetry) is widely used in the field of civil and environmental engineering. General aspects of LSPIV are introduced and several applications are introduced in this paper. The difference of LSPIV from the conventional PIV techniques is not to use models for experiments but to use the flow fields in nature. For LSPIV a converting process for the captured images is necessary.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.327-330
• /
• 2003

In this study a framework for cost effective visualization application is presented. Visualizations of a complex street rehabilitation and a highway interchange project are performed. The visualized products were presented to political and community groups, which significantly expedited the consensus building and project approval process.