• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.471-479
• /
• 2009

In this paper, we proposed an improved ray tracing method with an amelioration of visible tree structure, a visible face determination method, and non-uniform random test point method. In a proposed visible tree structure, it reduces tree nodes by means of merging similar nodes. In a visible face determination method, it shows that a ray hit test with a packet ray method can reduce a test time. A ray tracing method involving with a packet ray hit test method can improve a tree construction time up to 3.3 times than a ray tracing method with a single ray hit test method. Furthermore, by seeding a non-uniform and random test point on a face, tree construction time is improved up to 1.11 times. Received powers from the proposed ray tracing results and measured results have good agreement with 1.9 dB RMS error.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.5039-5055
• /
• 2018

The quality of natural outdoor images captured by visible camera sensors is usually degraded by the haze present in the atmosphere. In this paper, a fast image dehazing method based on visible image and near-infrared fusion is proposed. In the proposed method, a visible and a near-infrared (NIR) image of the same scene is fused based on the dual-tree complex wavelet transform (DT-CWT) to generate a dehazed color image. The color of the fusion image is regulated through haze concentration estimated by dark channel prior (DCP). The experiment results demonstrate that the proposed method outperforms the conventional dehazing methods and effectively solves the color distortion problem in the dehazing process.

• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.328-336
• /
• 1993

This study was conducted to investigate sensitivity of tree seedlings to $SO_2$. Visible injury symptoms and changes of ethylene production were investigated in tree seedlings with the fumigation of $SO_2$ in gas chamber 4 hours a day for six days. The symptoms of visible injury did not appear below 0.5ppm level of $SO_2$ exposure but a change of visible injury with the passage of time appeared at 1.5 and 2.5ppm in all seedlings. With the higher the concentration and/or the longer exposure of $SO_2$ the visible injury symptoms on leaves increased in all seedlings. The sensitivity of seedlings to $SO_2$ was the highest in Liriodendron tulipifera followed by Pinus strobus, Ginkgo biloba, Pinus densiflora and Pinus koraiensis. The amount of ethylene production was more at 1.5 and 2.5ppm of $SO_2$ exposure than at 0.5ppm and the peak time of it came faster at higher levels. The amount of ethylene production was significantly different among tree seedlings. It showed a higher at production of ethylene in Liriodendron tulipifera compared to Ginkgo biloba and the ethylene production of Pinus trees to $SO_2$ were the highest in Pinus strobus followed by Pinus densiflora and Pinus koraiensis. In needle of Pinus strobus the ethylene production increased with the increasing rate of visible injury until the injury rate of 40-50% and than decreased with the increasing rate of visible injury since the rate of 50%.

• Textile Coloration and Finishing
• /
• v.12 no.4
• /
• pp.239-247
• /
• 2000

The coloring matter was extracted from the heartwood of Amur cork tree by distilled water. Change of UV-Visible spectra of coloring matter solution by extraction condition and stability for irradiation were determined, and the effect of repeated dyeing with condition of dyebath and mordanting method on shade depth and lightfastness were also investigated. The results are as follows : 1) Absorbance of Amur cork tree extract increased with the lapse of extraction time. λmax of color solution extracted from Amur cork tree was found at 420, 333, and 262nm. 2) Absorbance of Amur cork tree extract decreased remarkably after 2hr irradiation. 3) The K/S of silk fabrics increased with the increase of dyeing temperature, time, amounts of Amur cork tree for extraction, and pH of color solution. 4) K/S of silk fabrics dyed by repeated dyeing method was affected by pH and concentration of color solution. 5) Lightfastness of silk twice dyed with Amur cork tree extract after pre-mordanted by 8%(o.w.f) chromium acetate was moderately improved.

• Korean Journal of Environment and Ecology
• /
• v.28 no.2
• /
• pp.253-262
• /
• 2014

This study was conducted to find methods of qualitative landscape assessment for vegetational landscapes using ecological analysis. The study site was Seoraksan National Park in Korea. For this study, differing unique landscape resources were categorized and identified according to ecosystems. After identifying the study areas, the relationship between trail visitor preference and the amount of visible overexposure caused by people to the resources was examined. Landscape resources chosen for ecological analysis at Seoraksan National Park were subalpine vegetation community, high mountain rocks, ombrogenous deciduous broadleaf forest in the valley area, edaphic climax community, big tree community, flowering tree dominant community, autumnal tree dominant community and needle-leaf forest in the subalpine area. As a result of the study, it was found that the landscape resources with the highest correlation to visitor trail preference were big tree community area, flowering tree dominant community area, and needle-leaf forest in the subalpine area. As a result of overlapping the analysis of the amount of visible overexposure to the landscape resources and the analysis of preferential use of trails by visitors, guidance for the appropriate season for each trail can be provided. Since a positive correlation exists between certain sections of the natural landscapes and visitor preference, ecological impact on landscape resource ecosystems did not appear to cover wide areas of the trails, but was limited to certain areas preferred by visitors.

• Journal of Korean Society of Forest Science
• /
• v.95 no.2
• /
• pp.216-219
• /
• 2006

After long exposure to low-density $SO_2$ the five tree species showed different changes in their visible damage: Ailanthus altissima showed no visible damage; Acanthopanax sessiliflorus, Populus alba ${\times}$ Populus glandulosa, and Platanus orientalis showed typical damage of yellow spots on their leaves; and Liriodendron tulipifera showed serious damage on the end of leaf tip. The photosynthesis rate of Liriodendron tulipifera and Acanthopanax sessiliflorus was usually lower than the control group: Ailanthus altissima, Populus alba ${\times}$ Populus glandulosa, and Platanus orientalis showed no difference from the control group, while Acanthopanax sessiliflorus and Liriodendron tulipifera showed large changes. In regard to the light compensation points, Ailanthus altissima showed similar values, Populus alba ${\times}$ Populus glandulosa and Platanus orientalis exposed to $SO_2$, showed 3 to $5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ higher values than the control group, and Acanthopanax sessiliflorus and Liriodendron tulipifera exposed to $SO_2$ showed approximately twice higher light compensation points.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.10-18
• /
• 2001

Experiments were conducted to compare ozone sensitivity among clones. Ten clones of Papulus deltoides Marsh. were exposured in walk-in type chambers to charcoal-filtered air, 50ppb, 100ppb, and 150ppb ozone for 8h $day^{-1}$ for 21 consecutive days. Occurrence of premature leaf-fall, and visible foliar injury expressed as adaxial stipple were measured after termination of ozone exposure for 3 weeks. Rate of premature leaf-fall increased progressively according to ozone exposure levels. As a result, rate of premature leaf-fall was estimated over 50% at 150ppb ozone. In the charcoal-filtered air and 50ppb ozone treatments, visible foliar injury was not found. But injury was estimated as LA; 17.3%, AA; 6.5%, and LAA; 1.6% to 100ppb ozone treatment and LA; 34.1%, AA; 17.5%, and LAA; 7.4% to 150ppb ozone treatment. Clonal differences of sensitivity within the species were manifested by significant clone differences of adaxial stipple(LAA) in 100ppb and 150ppb ozone treatments.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.11-20
• /
• 2010

In this study, the effects of stand height growth on GIS-based viewshed analysis were investigated. DSM was created by combining stand height layers on DEM using map algebra functions. In developing the tree height layers, the digital forest-type maps, forest site maps and stand yield tables of Korea Forest Research Institute were used. The time horizon for viewshed analysis were 40 years. Two viewpoints in crossings of downtown for viewshed analyses were chosen using a projective mapping technique. The effects of tree height growth over time on visibility were measured in terms of the depth of blind areas and the area of visible regions. The results of viewshed analyses show that 17% of visible regions is reduced when we use DSM instead of DEM. As the tree height grows, the visibility gets worse and worse and the depth of blind area increases.

• Journal of Radiation Protection and Research
• /
• v.47 no.3
• /
• pp.143-151
• /
• 2022

Background: After the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident, biological alterations in the natural biota, including morphological changes of fir trees in forests surrounding the power plant, have been reported. Focusing on the terminal buds involved in the morphological formation of fir trees, this study developed a method for estimating the absorbed radiation dose rate using radionuclide distribution measurements from tree organs. Materials and Methods: A phantom composed of three-dimensional (3D) tree organs was constructed for the three upper whorls of the fir tree. A terminal bud was evaluated using Monte Carlo simulations for the absorbed dose rate of radionuclides in the tree organs of the whorls. Evaluation of the absorbed dose targeted ¹³¹I, ¹³⁴Cs, and ¹³⁷Cs, the main radionuclides subsequent to the FDNPP accident. The dose contribution from each tree organ was calculated separately using dose coefficients (DC), which express the ratio between the average activity concentration of a radionuclide in each tree organ and the dose rate at the terminal bud. Results and Discussion: The dose estimation indicated that the radionuclides in the terminal bud and bud scale contributed to the absorbed dose rate mainly by beta rays, whereas those in 1-year-old trunk/branches and leaves were contributed by gamma rays. However, the dose contribution from radionuclides in the lower trunk/branches and leaves was negligible. Conclusion: The fir tree model provides organ-specific DC values, which are satisfactory for the practical calculation of the absorbed dose rate of radiation from inside the tree. These calculations are based on the measurement of radionuclide concentrations in tree organs on the 1-year-old leader shoots of fir trees. With the addition of direct gamma ray measurements of the absorbed dose rate from the tree environment, the total absorbed dose rate was estimated in the terminal bud of fir trees in contaminated forests.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.515-525
• /
• 2016

The Palsangjeon Pagoda is a five-story wooden building in the Beopjusa Temple area in the Songnisan national park in Chungcheongbuk-do, Korea. According to historical records, it was constructed in either AD 1605 or AD 1626. To specify the construction year more precisely, we took 41 wood samples for tree-ring analysis during repair actions in 2013; 28 from red pine (Pinus densiflora S. et Z.), 12 from oak (Quercus spp.), and 1 from fir (Abies spp.). The tree-ring boundaries became clearly visible by smoothing their cross-sectional surface and the tree-ring widths were measured under a stereo microscope. All tree-ring series were compared with each other to establish mean chronologies, which we then compared with local master chronologies established using tree rings collected from wooden elements of the Daeungjeon Hall which is the main building in the Beopjusa Temple area. As a result, it was verified that the red pines were felled in AD 1624 and in AD 1851. Moreover, it was verified that the oaks were also felled in AD 1624 based on cross-dating with the red pine chronology. We concluded that the Palsangjeon Wooden Pagoda was constructed in AD 1626, as mentioned in the historical record (Daeungdaekwangmyeongjeonbulsangki, 1630) and the letters on a purlin on the $4^{th}$ story, using oak and red pine felled in AD 1624 and repaired later on using red pine felled in AD 1851.