• Rapid Communication in Photoscience
• /
• v.4 no.4
• /
• pp.82-85
• /
• 2015

Photoelectrochemical cell (PEC) is one of the attractive ways to produce clean and renewable energy. However, solar to hydrogen production via PEC system generally requires high external bias, because of material's innate electronic band potential relative to hydrogen reduction potential and/or charge separation issue. For spontaneous photo-water splitting, here, we design dye-sensitized solar cell (DSSC) and their monolithic tandem cell incorporated with a $BiVO_4$ photoanode. $BiVO_4$ has high conduction band edge potential and suitable band gap (2.4eV) to absorb visible light. To achieve efficient $BiVO_4$ photoanode system, electron and hole mobility should be improved, and we demonstrate a tandem cell in which $BiVO_4/WO_3$ film is connected to cobalt complex based DSSC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.454-460
• /
• 2016

Unlike conventional visible light communications (VLC) adopting photo detectors (PD), optical camera communications (OCC) employs cameras in detecting the transmitted data. Especially, the data rate of OCC can be enhanced by using the principle of rolling-shutter, which is the operating scheme of a CMOS image sensor. In this study, we consider a novel OCC system for high-speed real time video processing to transmit high speed data from LED and to acquire image utilizing rolling-shutter effect of CMOS image sensor. Also, we demonstrate the improved performance of proposed system using a test-bed.

• International journal of advanced smart convergence
• /
• v.5 no.2
• /
• pp.73-79
• /
• 2016

Remote sensing and measurement are of paramount importance of providing information on the state of water quality in water bodies. The formation and growth of cyanobacteria is of serious concern to in land aquatic life forms and human life. The main cause of water quality deterioration stems from anthropogenic induced eutrophication. The goal of this research to quantify and determine the spatial distribution of cyanobacteria concentration in the water using remote sensing technique. The standard approach to measure water quality based on the direct measurement of the fluorescence of the chlorophyll a in the living algal cells and the same approach used to detect the phycobilin pigments found in blue-green algae (a.k.a. cyanobacteria), phycocyanin and phycoerythrin. This paper propose the emerging sensor design to measure the water quality based on the optical analysis by fluorescence of the phycocyanin pigment. In this research, we developed an method to sense and quantify to derive phycocyanin intensity index for estimating cyanobacteria concentrations. The development of the index was based on the reflectance difference between visible light band 620nm and 665nm. As a result of research this paper presents, an optical biological sensor design information to measure the Phycocyanin parameters in water content.

• Natural Product Sciences
• /
• v.11 no.2
• /
• pp.109-114
• /
• 2005

Leucas aspera Link. (Lamiaceae) is an important medicinal plant in indigenous systems of medicine in India and commonly known as 'Thumbai'. It has various ethnomedicinal values as various traditional communities find diverse medicinal properties. It is used as antipyretic, stimulant, expectorant and diaphoretic drug. The present communication deals with the detailed pharmacognostical evaluation of whole plant of L. aspera collected from five different geographical zones of the country-Uttar Pradesh, Orissa, Karnataka, West Bengal and Gujarat. The botanical characters and TLC fingerprint profile of all the samples were quite similar but some variations were observed in physicochemical parameters. However, some microscopical characters and TLC profile can be used as diagnostic characters for identification of L. aspera, for example amphistomachic leaves and two types of trichomes-abundant, non glandular, uniseriate, 1-3 celled and few glandular, 2-5 celled stalk with rounded tip. Presence of some components at $R_fs-0.56$, 0.65 and 0.76 under UV 366 and at $R_fs-0.31$, 0.43, 0.60, 0.76 and 0.82 under visible light after derivetization in TLC profile may also be used as diagnostic character.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.905-912
• /
• 2014

In this paper, a new architecture is proposed to achieve complexity efficiency in implementing variable pulse position modulation (VPPM). VPPM, specified in IEEE 802.15.7, can support wireless communication and dimming control simultaneously using visible light. The proposed architecture is based on the VPPM signal property in which the transition point of the modulated output is obtained by counting the sample index and comparing it to both the assigned dimming factor and the transmitting data. Therefore, the proposed architecture can be composed of simple logics, including a counter, a comparator, and an inverter, all of which are insensitive to the dimming resolution in contrast to a conventional codeword-table method. This paper describes the verification of the proposed algorithm through a register-transfer level implementation of the codeword and proposed architectures. In comparison with the codeword-table method, the proposed method gains a nine-fold complexity reduction at a 1% dimming-step resolution.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.394-394
• /
• 2007

Transparent conductive films can serve as a critical component in displays, solar cells, lasers, optical communication devices, and solid state lighting. Carbon nanotube (CNT) based transparent conductive films are fabricated on glass and polymer substrates. CNTs typically exist in form of quasi-crystalline bundles or highly entangled bundles containing tens of individual nanotubes. To achieve full potential, CNTs must be dispersed in a solvent or other organic media. CNTs are acid treated with nitric acid then the stable dispersion of CNTs in polar solvent such as alcohols, DMF, etc. is achieved by sonication. The solubility of CNTs correlates well with the area ratio of the D and G bands from Raman spectrum. Thin films are formed from well dispersed CNT solutions using spray coating method. CNT thin films exhibit a sheet resistance ($R_s$) of nearby $10^3\;{\Omega}/sq$ with a transmittance of around 80% on the visible light range, which is attributed by excellent dispersion and interaction among CNTs, solvents and polymeric binders.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.377-378
• /
• 2015

실내형 자율 주행 로봇에서의 가장 중요한 기술력은 IGS(indoor GPS System)라 할 수 있다. 재난로봇이나 정찰로봇, 경계로봇등 새로운 로봇의 영역이 늘어남에 따라 실내에서 로봇을 안전하게 구동시키는 연구가 활발히 진행되고 있다. 기존 GPS를 사용할 수 없는 실내에서, LED 조명으로 통신이 가능한 가시광통신은 실내위치 정보를 정밀히 파악하기에 적합하다. 이에 가시광통신을 이용하여 LED 조명별 기준위치를 파악하는 서로 다른 16진수의 데이터를 전송하고, 그 위치를 파악하여 LED 조명의 위치를 식별할 수 있음을 확인한다. 이러한 실험결과를 통하여 가시광통신을 이용해 실내형 자율 주행 로봇의 실내 위치 추정 시스템을 제안한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.143-150
• /
• 2018

With the rapid development of RF based high speed wireless communication technology, devices that can be applied to IoT networks based on RF bandwidth are rapidly spreading, nevertheless, the development speed of the RF communication is not possible to keep up with the spread of the RF band for wireless communication. In this situation, OWC technology that uses visible light source as a transmitter is attracting attention as a technology that can overcome the band exhaustion problem of RF based wireless communication technology. Although, due to the distortion of the LED illumination shape by camera exposure time and LED blinking period, the LED illumination detection rate is degraded and the RoI setting is inaccurate. In this paper, we propose an adaptive median filter applied LED illumination detection algorithm for low rate CamCom, it is possible to detect a clear RoI and LED illumination. This research will be able to play a role as a complementary material of RF based wireless communication technology efficiently.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.623-629
• /
• 2018

Smart Factory is a concept of automatic production system of machines by the fusion of ICT and manufacturing. As a base technology for realizing such a smart factory, there is an increasing interest in a low-power environmentally friendly LED lighting system, and researches on so-called optical ID related application technologies such as communication using a LED and position recognition are actively underway. In this paper, We have proposed a system that can reliably identify logistics location and additional information without being affected by electromagnetic interference such as high voltage, high current, and generator in the plant. Through the basic experiment, we confirmed the applicability of the color ID recognition rate from 98.8% to 93.8% according to the eight color variations in the short distance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.362-368
• /
• 2021

A homeotropic liquid crystal (LC) alignment state on rubbed fluorinated self-assembled monolayers (FSAMs) is described according to alkyl chain length. A simple procedure, gas-phase method, for the preparation of FSAM was used. The average optical transmittance in the visible light range of FSAMs were 76.63% to 78.21%, which were superior to the conventional polyimide layer having a transmittance of 75.89%. In addition, the excellent homeotropic LC alignment characteristics of FSAMs were observed through pretilt angle measurement and polarized optical microscope images. By measuring the contact angles and the surface energies of FSAMs, it was confirmed that pretilt angles of LC molecules increased according to the alkyl chain length. High optical transparency and uniform homeotropic LC alignment characteristics of FSAMs showed the possibility of FSAMs as an LC alignment layers.