• Journal of Applied Biological Chemistry
• /
• v.54 no.1
• /
• pp.1-6
• /
• 2011

${\gamma}$-PGA(poly-${\gamma}$-glutamic acid) is an unusual anionic polypeptide that is made of D- and L-glutamic acid units connected by amide linkages between ${\alpha}$-amino and ${\gamma}$-carboxylic acid groups. ${\gamma}$-PGA has been isolated from many kinds of organisms. Many Bacillus strains produce ${\gamma}$-PGA as a capsular material of an extracellular viscous material. It is safe for eating as a viscosity element of fermented soybean products such as Chungkookjang and Natto. It is biodegradable, edible and nontoxic toward humans and the environment and its molecular weight varies from ten thousand to several hundred thousand depending on the kinds of strains used. Therefore, potential applications of ${\gamma}$-PGA and its derivatives have been of interest in the past few years in a broad range of industrial fields such as food, cosmetics, medicine, water-treatment, etc. In this study, a bacterium, Bacillus subtilis GS-2 isolated from the Korean traditional seasoning food, Chungkookjang could produce a large amount of ${\gamma}$-PGA with high productivity and had a simple nutrient requirement. Based on carbon utilization pattern and partial 16S rRNA sequence analysis, the GS-2 strain was identified as B. subtilis. The determination of purified ${\gamma}$-PGA was confirmed with thin layer chromatography (TLC), high performance liquid chromatography (HPLC), fourier transform infrared (FT-IR) spectra, and $^1H$-nuclear magnetic resonance ($^1H$-NMR) spectroscopy.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.480-493
• /
• 2019

In this study, the method for processing glue and glue-alum sizing from the dancheong ground treatment was evaluated with respect to weather resistance, and its effect on the conservation of dancheong was analyzed. Viscosity and pH of the glue and glue-alum specimen were measured and classified into three categories(none layer, glue layer, and glue-alum layer), which were further classified according to low concentration(four times for 2%) and high concentration(once for 10%). The base layer formation was subsequently classified into three categories based on pigment adoption, namely, Noerok(celadonite), Seokganju(terra rossa), and Jangdan(red lead). The completed specimen was subjected to a changing-environment experiment for evaluating weather resistance and observing the surface. Color variations were analyzed before and after the experiment. The results indicate that glue-alum sizing comprising 5% alum or 7% alum has strong acidity that can affect the life of dancheong, and the high level of 7% alum makes it difficult to create a solid coating layer. After ultraviolet irradiation, the specimen with 7% alum changes its color to yellow. Furthermore, after moisture absorption and drying, cracks can be observed on the entire specimen surface that corroborate the physical change. Additionally, gas-based corrosion causes marginal surface changes. Hence, the formation of a stable coating layer can be achieved by incorporating a low concentration glue solution that is almost neutral, and the application of glue-alum sizing having 2% concentration can aid in the conservation of dancheong.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.239-248
• /
• 2006

Improvements in understanding the effects of dietary fermentable carbohydrates and their interaction with supplemental feed enzymes and the feed manufacturing process may lead to reductions in volatile organic compound (VOC) emissions from poultry manure. Starch digestibility has been improved by replacing ground wheat or barley with whole wheat or barley, but there was no consistent effect of cereal species or feed form on the pH value of the gizzard contents. Pelleting results in improvements in feed conversion from 0 to 12%. Starch digestibility has been reported to account for up to 35 % of the improvement in available metabolic energy as a result of xylase supplementation. Factors which affect starch utilization and non-starch polysaccharide (NSP) absorption include the presence of anti-nutrient facto. (ANF) in grains, the nature of grain starch, NSP and the digestive capacity of animals. Improvements in feed production technology have been made in enzyme stabilization, allowing some dry enzyme products to be pelleted after conditioning at up to $87.69^{\circ}C$ and liquid enzymes to be stored in the feed mill for up to low months prior to use. The soluble NSP, arabinokylans and beta-glucans are partially degraded into smaller fragments by enzymes. With fragmentation, the water holding capacity is decreased, which leads to a reduction in digesta moisture, wet feces, and dirty eggs from hens fed diets containing viscosity-inducing ingredients.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.401-408
• /
• 2014

In membrane bio-reactor (MBR), the aeration control is one of the important independent variables to decrease fouling and to save energy with shear stress change on the membrane surface. The paper was carried out for numerical simulation of 3-dimensional fluid flow phenomena of the cylindrical bioreactor with submerged flat membranes equipped in the center and supplied the air from the bottom by using the COMSOL program. The viscosity and temperature of solution were assumed to be constant, and the specific air demand based on permeate volume ($SAD_p$) defined as scouring air per permeate rates was used as a variable. The calculated CFD velocities were compared with those of the velocity meter measurement and video image analysis, respectively. The results were good agreement each other within 11% error. For fluid flow in the reactor the liquid velocity increased rapidly between the air diffuser and membrane module, but the velocity decreased during flowing of the membrane module. Also, the velocity increased as it was near from the reactor wall to the central axis. The calculated shear stress on the membrane surface showed the highest value at the center part of the module bottom side and increased as aeration rate increased. Especially, the wall shear stress increased dramatically as the aeration rate increased from 0.15 to 0.25 L/min.

• Korean Journal of Food Science and Technology
• /
• v.21 no.5
• /
• pp.624-632
• /
• 1989

Lipids of Liza carinata roe were extracted and separated into detailed lipid classes by column chromatography. About 57-62% of the total lipids consisted of wax esters in which saturated and unsaturated fatty alcohols combined with fatty acids with up to six double bonds. Between the even-numbered wax ester peaks in gas-liquid chromatography, ones with odd chain lengths such as C31, C33 and C35 were eluted in appreciable amounts. Isomers composed of different fatty acids and alcohols at a given chain length were not resolved on 1.5% OV-17 column. The principal component of wax esters in sample A were C32, C34 and C30 (45.0%, 19.2%, and 12.2%), followed by C36 and C38 length (9.5% and 4.7%), while those in sample B were mainly occupied by C34, C32 and C36 length (36.3%, 31.4% and 14.5%) with minor components C30 and C38 length (5.2%, and 3.4%). The wax esters were not a random combination of constituent fatty acids and alcohols. With increase in boiling temperature the wax esters increased slightly in viscosity over the unboiled, showing a tendency toward randomness, and finally were completely randomized at $360^{\circ}C$ for 40 minutes. The enzymes involved in wax ester biosynthesis seemed to have high selectivity for chain length of fatty acids and alcohols.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.343-351
• /
• 2016

Cryogenic spray characteristics of a nitrogen swirl injector operating in supercritical environment have been numerically investigated. By comparing the equation of states(EOS) used for supercritical condition, SRK EOS was applied to predict the nitrogen thermodynamic property under supercritical environment. A Chung's method was implemented for the calculation of viscosity and conductivity and Takahashi's correlation based on Fuller's Theorem was implemented for the calculation of diffusion coefficient. By injecting the nitrogen with 5 bar differential pressure into 50 bar chamber filled with nitrogen, numerical simulation has been conducted. The dynamic Smagorinsky sub-grid scale (SGS) model has been compared with the algebraic Smagorinsky SGS model using FFT frequency analysis. The instability at the liquid film and gas core inside injector and the propagation of pressure oscillation into the injector has been investigated. The spreading angle of swirl injector obtained by numerical calculation has been validated with experimental result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.575-589
• /
• 2008

In the present work, we investigate the hydrodynamic behavior of a turbulent bore, such as tsunami bore and tidal bore, generated by the removal of a gate with water impounded on one side. The bore generation system is similar to that used in a general dam-break problem. In order to the numerical simulation of the formation and propagation of a bore, we consider the incompressible flows of two immiscible fluids, liquid and gas, governed by the Navier-Stokes equations. The interface tracking between two fluids is achieved by the volume-of-fluid (VOF) technique and the M-type cubic interpolated propagation (MCIP) scheme is used to solve the Navier-Stokes equations. The MCIP method is a low diffusive and stable scheme and is generally extended the original one-dimensional CIP to higher dimensions, using a fractional step technique. Further, large eddy simulation (LES) closure scheme, a cost-effective approach to turbulence simulation, is used to predict the evolution of quantities associated with turbulence. In order to verify the applicability of the developed numerical model to the bore simulation, laboratory experiments are performed in a wave tank. Comparisons are made between the numerical results by the present model and the experimental data and good agreement is achieved.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.251-256
• /
• 2002

Fresh bamboo (Phyllostachys bambuoides sieb. et zucc.) was charred at the mechanical steel kiln and traditional earth kiln with subsequent condensation of its smoke to 10$0^{\circ}C$. It was settled down for 12 months to remove tar components and then the middle layer of the liquid was collected as a bamboo smoke distillates to analyze its chemical composition and physicochemical characteristics for use as food additives or processing aids. The gravity, transmittance, reflectivity, and viscosity were 1.008, 89.05%, 1.36%, and 12.48 cp in the bamboo smoke distillates processed by mechanical steel kiln (MBSD) and 1.012, 98.33%, 1.34% and 9.05 cp in the bamboo smoke distillates by traditional earth kiln (TBSD), respectively. The color of TSBD was brighter than that of MBSD. The pH and titratable acidity, tar and remains were 3.55 and 2.830%, 2.803% and 0.671%, respectively, in the MBSD and 2.93 and 3.470%, 0.051% and 0.004%, respectively, in the TBSD. The major phenolic compounds of bamboo smoke distillates (BSD) were phenol, Ο-cresol, p-cresol, and guaiacol and the major organic acids were acetic acid, propionic acid, iso-butyric acid, and n-butyric acid, and major alcohols were methanol, furfuryl alcohol, and maltol. The contents of phenolic compound and alcohol were more in MBSD than in TBSD whereas the content of organic acid was more in TBSD than in MBSD. Therefore, toxic compounds for the human body, such as methanol from BSD should be removed for use as a food ingredient in the future.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.541-548
• /
• 2020

There is a growing demand for natural materials to replace adhesives based on volatile organic compounds (VOCs). However, the exclusion of VOCs from the manufacturing process leads to difficulties in manufacturing, and reduction in productivity and preservability. In this paper, we report the manufacture of natural bioadhesives using the carrageenan component of seaweed. λ-carrageenan, isolated from the extracted total carrageenan, was used to prepare a highly stable adhesive for paper. The resulting composition was 52.0 ± 1.0% λ-carrageenan, 30.5 ± 0.5% Polyvinylpyrrolidone, 1.0 ± 0.05% ethylhexylglycerin, 1.5 ± 0.05% glycerin, 13.5 ± 0.5% dextrine, and 0.6 ± 0.05% food-grade antifoam emulsion. The viscosity was found to be 1.13 ± 0.07 × 105 cP (25℃), UV degradation occurred at pH6.22, drying rate was 15min, △b^* was -10.79, and △E^* ab was 8.18. The bioadhesive showed an excellent adhesion strength of 44.63 kgf/cm². Thus this adhesive showed excellent fungal resistance and good adhesive persistence, without the presence of total volatile organic compounds (TVOC), formaldehyde (HCHO), and heavy metals.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.159-162
• /
• 2005

전자빔을 이용하던 CRT(Cathode Ray Tube) 모니터에서 픽셀단위의 LCD(Liquid Crystal Display) 디스플레이 사용으로 휴대용 정보처리 장치들은 급속한 발전을 이루게 되었다. 기존의 CRT 모니터에서 전자빔을 사용하던 방식에서 픽셀(Pixel) 단위의 후면발광 디스플레이를 만들면서 CRT 모니터보다 빠른 응답특성을 나타내며 저 전력일 뿐만 아니라 디스플레이의 두께도 줄일 수 있게 되었다. 휴대가 가능한 디스플레이의 발전으로 노트북이나 PDA와 같은 실시간 정보를 활용 및 처리 할 수 있는 방법들을 제시할 수 있었지만 원활한 활용을 위해 더 적은 전력을 사용하는 방법들이 제시되어야 했다. 이에 따라 저 전력 소모, 빠른 응답특성, 넓은 시야각 그리고 경량화가 가능한 디스플레이가 되기 위한 새로운 디스플레이가 선을 보이게 되었다. 현재 차세대 디스플레이로 각광을 받고 있는 디스플레이 소자로는 OLED(Organic Light Emitting Diode)가 있다 이는 LCD 디스플레이가 가지고 있는 단점을 보완하여 우선적으로 높은 색도가 가능하며 후면발광을 사용하지 않고 자체 발광을 하기 때문에 저 전력 소모가 현실화되었다. 또한 디스플레이의 유동성이 가능하여 휘어질 수 있는 특성을 가지고 있다. 그러나 이러한 유기발광 소자의 경우 높은 발광 효율을 위한 구조적 개선이 필요하며 소자의 수명도 개선해야 한다. 이에 따라 유기발광 소자의 메카니즘에 대한 파악이 필요하게 되며 물리적 구조에 대한 이해가 필요하다. 이를 위해 물리적, 수치적 해석으로 소자의 특성을 파악해 줌으로써 개선된 유기발광 소자 제작이 가능 할 것이다.기에 대한 영향정도를 측정하여 정량적으로 도출하였다. 이를 각 구간에 대해 상호 비교 분석함으로써 대형국책사업에서의 공기지연인자에 대한 분석 방법론을 정립하였고 공기지연 분석 방법론의 현실적 적용을 위한 제언과 그에 따른 개선사항에 대해 도출하였다.있는 발판을 마련하게 된다고 추정하였다. 0.5%가 control사이에서 0.95로 가장 색차가 크게 나타났으며, 그 다음이 냉동분쇄 0.5% 0.83으로 나타나 송이의 첨가율이 높을수록 색차가 크게 나타나는 것을 알 수 있다. 색차가 가장 낮은 제품은 법동분쇄 0.3%, 동결건조 0.3%로 나타났다. 송이양갱의 색(color), 냄새(flavor), 맛(taste), 외관(appearances), 질감(viscosity), 종합적 평가(overall acceptability) 등의 관능평가를 실시한 결과 중 색에 대한 기호도는 냉동분쇄 0.1% 송이양갱이 가장 높은 것으로 나타났으나, 집단간 유의한 차이는 나타나지 않았고, 냄새는 동결건조 0.1%의 송이양갱이 3.38로 가장 점수가 높았으며, 냉동분쇄 0.3%의 송이양갱이 2.81로 가장 낮은 기호도를 나타내었다. 맛에서는 p<0.01수준에서 집단간 유의한 차이를 나타내었는데, 동결건조 0.1%가 그 중 가장 높은 기호도를 나타내었으며, 그 다음이 동결건조 0.5%였다. 가장 낮은 선호도를 나타낸 것은 열풍건조 0.5%였다. 질감은 P<.05 수준에서 집단간 유의미한 차이를 나타내었으며 동결건조 0.1%가 가장 높은 기호도를 나타내었으며, 동결건조 0.5%함유 송이양갱이 1.21로서, 현저히 낮은 기호도를 나타내었다. 종합적인 평가에서는 동결건조 0.1%함유