• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.356-362
• /
• 2011

The branched polycarbonates (B-PCs) with two different branching agents were synthesized from melt polymerization. The contents of branching agent were in the range of 0.001~0.005 mol%. The chemical structure of the synthesized PC was determined by FTIR, $^1H$ NMR, and $^{13}C$ NMR, spectroscopy. The molecular weight, glass transition and degradation temperatures were determined by GPC, DSC, and TGA. The molecular weight of the phloro type B-PC had a lower value than the other one, and the glass transition temperature increased with molecular weight. Compared with linear PC, the rheological properties of the B-PC indicated an increase of complex viscosity in the low frequency region and shear thinning tendency. Power law index(n) representing shear thinning was calculated by linear regression and the values were in the range of 0.483~0.996. The rheological properties of the B-PCs were measured by a dynamic rheometer.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.118-126
• /
• 2010

The fibrous material fraction as a by-product from the commercial aloe vera gel processing was obtained and freeze dried. The physicochemical characteristics such as the proximate composition, crystalline/surface structures and several physical functionalities including the water holding capacity (WHC), swelling capacity (SW), oil holding capacity (OHC), emulsion/foam properties and viscosity properties of this powdered sample (100 mesh) were investigated and analyzed by comparison with commercial $\alpha$-cellulose as a reference sample. The total dietary fiber content of powdered sample was very high as much as 87.5%, and the insoluble dietary and soluble dietary fiber content ratios were 77.6 and 22.4%, respectively. The FT-IR spectrum of powdered sample showed a typical polysaccharide property and exhibited a x-ray diffraction pattern for cellulose III and IV like structure. SW (8.24${\pm}$0.15 mL/g), WHC(6.40${\pm}$0.19 g water/g solid) and OHC(10.32${\pm}$0.29 g oil/g solid) of freeze dried aloe cellulose were about 3.3, 1.4 and 2 times higher than those of commercial $\alpha$-cellulose, respectively. Aloe cellulose (~2%, w/v) alone had no foam capacity while improved the foam stability of protein solution (1% albumin+0.5% $CaCl_{2}$) by factor of 300%. Emulsion capacity of 2%(w/v) aloe cellulose was about 70% level of 0.5%(w/v) xanthan gum, but its emulsion stability was about 1.2 times higher than that of xanthan gum. Also, aloe cellulose containing CMC (carboxyl methyl cellulose) of 0.3%(w/v) showed a very good dispersity. Aloe cellulose dispersion of above 1%(w/v) exhibited higher pseudoplasticity and concentration dependence than those of $\alpha$-cellulose dispersion, indicating the viscosity properties for new potential usage such as an excellent thickening agent.

• IMMUNE NETWORK
• /
• v.21 no.1
• /
• pp.11.1-11.10
• /
• 2021

Coronavirus causes an infectious disease in various species and crosses the species barriers leading to the outbreak of zoonotic diseases. Due to the respiratory diseases are mainly caused in humans and viruses are replicated and excreted through the respiratory tract, the nasal fluid and sputum are mainly used for diagnosis. Early diagnosis of coronavirus plays an important role in preventing its spread and is essential for quarantine policies. For rapid decision and prompt triage of infected host, the immunochromatographic assay (ICA) has been widely used for point of care testing. However, when the ICA is applied to an expectorated sputum in which antigens are present, the viscosity of sputum interferes with the migration of the antigens on the test strip. To overcome this limitation, it is necessary to use a mucolytic agent without affecting the antigens. In this study, we combined known mucolytic agents to lower the viscosity of sputum and applied that to alpha and beta coronavirus, porcine epidemic diarrhea virus (PEDV) and Middle East respiratory syndrome coronavirus (MERS-CoV), respectively, spiked in sputum to find optimal pretreatment conditions. The pretreatment method using tris(2-carboxyethyl)phosphine (TCEP) and BSA was suitable for ICA diagnosis of sputum samples spiked with PEDV and MERS-CoV. This sensitive assay for the detection of coronavirus in sputum provides an useful information for the diagnosis of pathogen in low respiratory tract.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.485-500
• /
• 2018

The behavior of cement-based permeation grouting is divided into three different groups depending on the grain size distribution of the soils: (1) zone of cement-based permeation grouting not feasible; (2) zone of cement-based permeation grouting feasible; and (3) zone in which an accelerating agent should be added to limit the penetration depth. In the cement-based permeation grouting feasible zone, the concept of a representative pore radius was proposed. The ratios of the representative pore radius to the mean pore radius were obtained by performing laboratory test and comparing with clogging theory; these values were in the range of 1.07 and 1.35 depending on the grain size distribution of the soils. In addition, a functional relationship between the lumped parameter (${\theta}$), the representative pore radius and the w/c ratio were derived by comparing and matching experimental results with predictions from theory. In the zone in which the accelerating agent should be added, the controlling process of gel time to limit the penetration depth was experimentally verified. The test results matched well with those obtained from theory utilizing the developed grout penetration program on condition that the viscosity increasing tendency of grout suspension with time is properly taken into account.

• Culinary science and hospitality research
• /
• v.22 no.7
• /
• pp.100-111
• /
• 2016

Tomato sauce were prepared with five different thickening agents including roux (TR), non-glutinous rice powder (TN), glutinous rice powder (TG), potato starch (TP) and tapioca starch (TT) to examine proximate composition (moisture, carbohydrate, crude protein, crude fat, crude ash, crude ash), calorie, color value, pH, salinity, $^{\circ}Brix$, reducing sugar, viscosity and sensory test (attribute difference, acceptance). The results were as follows: Moisture, carbohydrate content were the lowest while crude fat and calorie were the highest in TR (roux). On the other hand, moisture, carbohydrate content were the highest while crude protein, crude fat and calorie were the lowest in TP (potato starch) and TT (tapioca starch). Using potato starch and tapioca starch are supposed to be prepared low-fat, low-calorie tomato sauce. L value was the highest in TN (non-glutinous rice powder), a value was the highest in TP (potato starch), b values was the highest in TR (roux). pH of tomato sauce showed a range of 5.24 to 5.39. TG (glutinous rice powder) was the highest and TT (tapioca starch) was the lowest in pH. TP (potato starch) was the highest salinity, reducing sugar was the lowest. TG (glutinous rice powder) was the lowest salinity, $^{\circ}Brix$ was the highest. And TR (roux) was the lowest $^{\circ}Brix$, reducing sugar was the highest. In viscosity, TG (glutinous rice powder) was the highest and TT (tapioca starch) was the lowest. The attribute difference test results was the highest in gloss, color intensity, tomato odor, tomato taste, pure taste in TT (tapioca starch) and savory taste, oily taste, thickness, residue was the highest in TR (roux). The preference test results reveal that the appearance, flavor, taste, texture and overall acceptance level was the highest in TP (potato starch) and TT (tapioca starch). The results of this study, tomato sauce prepared potato starch and tapioca starch instead of the traditional roux was higher in sensory acceptability. Recently, people is avoided high-fat and high-calorie foods, and potato starch and tapioca starch are confirmed that the tomato sauce can be made of a low-fat and low-calorie.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.55-64
• /
• 2009

This study is aimed to derive the optimum mix proportion of the combined self compacting concrete according to cement types (blast-furnace slag cement and belite cement) and to propose the basic data to field construction work after evaluating the quality properties. Specially, lime stone powder (LSP) as binder and viscosity agent are used in the combined self compacting concrete because slurry wall of an underground LNG storage tank should be kept stability of quality during concrete working. Replacement ratio of LSP is determined by confined water ratio test and main design factors including fine aggregate ratio ($S_r$), coarse aggregate ratio ($G_v$) and water-cement ratio (W/C) are selected. Also, quality properties including setting time, bleeding content, shortening depth and hydration heat on the optimum mix proportion of the combined self compacting concrete according to cement type are compared and analyzed. As test results, the optimum mix proportion of the combined self compacting concrete according to cement type is as followings. 1) Slag cement type-replacement ratio of LSP 13.5%, $S_r$ 47% and W/C 41%. 2) Belite cement type-replacement ratio of LSP 42.7%, Sr 43% and W/C 51%. But optimum coarse aggregate ratio is 53% regardless of cement types. Also, as test results regarding setting time, bleeding content, shortening depth and hydration heat of the combined self compacting concrete by cement type, belite cement type is most stable in the quality properties and is to apply the actual construction work.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.496-503
• /
• 1996

Aromatic and aliphatic copolyesters for the dispersing agent were synthesized by two stage reaction, esterification and polycondensation. Copolyesters were blended with PET in the melt state and their thermal and rheological properties were investigated. From GPC analysis Mn's and Mw's of copolyesters were about 30000 and 65000g/mol, respectively. From DSC experiment copolyesters had melting range of $90{\sim}150^{\circ}C$. Copolymer composition was in good agreement with comonomer feed ratio from $^1H$-NMR analysis. Copolyesters and SPA (standard sample) were blended with PET in the melt state. From DSC experiment, copolyesters and SPA were miscible with PET. From the dynamic melt viscosity experiment, melt viscosity of blended sample was increased as the content of aromatic copolyester was increased, while it was decreased as the content of aliphatic and SPA were increased. As for volume resistivity of dry color containing carbon black and copolyesters with dispersing time, aromatic copolyester showed highest value. It was conferred from this result that aromatic copolyester was the best dispersing agent for carbon black in PET resin.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.5
• /
• pp.512-520
• /
• 2017

This study was carried out to develop concentrate of residual jujube flesh around the seed as a thickening agent of Bulgogi sauce. Quality characteristics and sensory test of Bulgogi sauces added with jujube concentrate (30%, 35%, 40%, 45%, 50%) were evaluated in comparison with control sauce containing xanthan gum as a thickening agent. Moisture content of Bulgogi sauce added with 30% jujube concentrate was the highest (74.59%). As content of jujube concentrate increased, moisture contents in Bulgogi sauces significantly decreased. Sugar content of control sauce ($30.82^{\circ}Bx$), was lowest among the sauces. As content of jujube concentrate increased, Sugar content of sauces significantly increased ($33.00{\sim}34.38^{\circ}Bx$). Salinity (%) was highest in control sauce (1.38%), and there was no difference in salinity among the sauces depending on the amount of jujube concentrate. Viscosity was highest in sauce added with 50% jujube concentrate (43.33 cP) and lowest in sauce with 30% jujube concentrate (13.20 cP). As content of jujube concentrate increased, viscosity tended to increase significantly. Spreadability was highest in sauce added with 30% jujube concentrate (8.88 cm). As the amount of jujube concentrate increased, spreadability of sauce tended to decrease significantly. Color value was different according to the contents of jujube concentrate in sauces. L-, a-, and b-values of control sauce were highest at 40.19, 1.5, and 24.57, respectively. The results of the sensory test for Bulgogi sauce showed that overall preference was significantly highest in sauce added with 35% jujube concentrate. Moreover, sauce added with 35% jujube concentrate was preferred the most in terms of appearance, taste, and fluidity. Meanwhile, the results of the differentiation test showed a significant difference in color intensity, jujube flavor and taste, sweet taste, and salty taste. However, no significant difference was observed in fluidity. The results of the preference test for Bulgogi seasoned with sauces added with jujube concentrate showed that overall preference and flavor, taste, and texture preference were highest in Bulgogi seasoned with sauce added with 35% jujube concentrate. However, no significant difference was observed in preference towards appearance among the samples.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.148-160
• /
• 2014

This study was performed to find out the optimum condition of a thickening agent for brown sauce. Four thickening agents of non-glutinous rice, glutinous rice and potato starch, and roux as control thickeners were tested with various concentrations of each thickener to investigate the quality characteristics of brown sauce samples. The moisture contents of the brown sauce samples thickened with non-glutinous rice, glutinous rice and potato starch showed higher than that of the brown sauce samples thickened with roux. The brown sauce samples thickened with non-glutinous rice and potato starch had higher viscosity than the samples with glutinous rice and roux. The brown sauce with roux showed the highest on Hunter's color L and b value and the brown sauce with non-glutinous rice showed the highest a value. The brown sauce samples with 11% of roux, 11% of non-glutinous rice powder, 12% of glutinous rice powder and 6% of potato starch showed significantly higher scores in the acceptance test. The brown sauce with 6% potato starch resulted in the highest score in brown color, gloss, and transparency, and the brown sauce with 11% of roux showed the highest roast smell. The brown sauces with 6% potato starch and 11% of roux showed higher viscosity than the samples with 11% of non-glutinous rice and 12% of glutinous rice.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.554-562
• /
• 1995

Effect of the modification of rice protein by protease and 2-mercaptoethanol on physicochemical and gelatinization properties was investigated for the three cultuvars of rice. Total amylose contents of Chucheongbyeo(japonica type), Chosengtongilbyeo(tongil type, indica x japonica) and IR 36 (indica type) were in the range of $20{\sim}25%$. Total amylose and insoluble amylose content of IR 36 were higher than the others. The differential scanning calorimetric and X-ray diffraction results revealed higher relative crystallinity of IR 36 than the others. Water uptake was increased and amylographic viscosity was significantly decreased by 2-mercaptoethanol treatment. Amylographic viscosity was significantly decreased and hot water-soluble carbohydrate content was increased by protease treatment. The proportions of high molecular weight of soluble carbohydrate fractionated by gel filtration chromatography were increased by protease treatment. These effects were most significant in IR 36. This results suggested that starch gelatinization be accelerated by alteration of the protein with protease and reducing agent.