• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.291-292
• /
• 2002

Using a low viscosity synthetic traction oil and a low viscosity mineral oil with nearly equal viscosity grade of ISO VG 32, the effect of kind of oil on the fatigue life of bearing steel rollers was examined. A pair of rollers finished the contact surfaces to a mirror-like condition were driven under rolling with sliding conditions of s = -3.2% and a maximum Hertzian stress in the range of $P_H=2.8GPa{\sim}4.0GPa$ was applied in point contact condition. As a result of experiments, the fatigue life with a mineral oil was longer than that with a traction oil under higher stress conditions above $P_H=3.4GPa$. Based on the numerical calculation results of the thermal EHL which simulates the present experiment, the authors discuss the reason why such a difference in the fatigue life comes out.

• Journal of the Korean Ceramic Society
• /
• v.44 no.2 s.297
• /
• pp.103-109
• /
• 2007

In this study, the rheological properties of cement pastes containing blastfurnace slag of different fineness were investigated. The fluidity of cement pastes with low Blaine value blastfurnace slag was increased with decreasing the plastic viscosity and the yield stress of pastes. And the optimum dosage of polycarboxylate type superplasticizer to the cement pastes was confirmed according to the fineness and the replacement ratio of blastfurnace slag. All cement pastes showed the thixotropy behavior. And also it was formed that the segregation range of cement pastes was occurred below $10D/cm^2$ of the yield stress and below 350 cPs of the plastic viscosity by the coaxial cylinder viscometer.

• Journal of Energy Engineering
• /
• v.7 no.2
• /
• pp.180-186
• /
• 1998

In this study, the effect of shear rate on the viscosity variation is examined to understand the flow characteristics of the mixture of bentonite and water. The variation of film thickness according to mixing ratio and viscosity is measured to characterize the film formation. And, the separation of dried film is studied according to film thickness. Specific surface area affecting on adsorption capability is measured using BET method. The viscosity decreases and the film thickness increases as the mixing ratio increases. The separation characteristic of dried film is suitable within a range of 40 to 150 ${\mu}{\textrm}{m}$ in film thickness and 5 to 10% in mixing ratio.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.1
• /
• pp.1-10
• /
• 2003

Printing ink is faced various shear stress situation until it transfer to the printed substrate through the press. And in each shear stress condition the ink is needed to keep the appropriate viscosity according to the condition. The change of printing ink viscosity has been explained by well-known through the viscosity profile curve. But actually, the quality of printed paper depends on the ink behavior after transfer the substrates. Like this, to look into the behaviour of the ink on the printed substrate, it is needed the experiment of the ink structure recovering by rheology study. In this study, by controling the $CaCO_3$ content in the ink, after investigating the effect of the ink's structure recovery of the pigment concentration, we intend to predict the printing quality of the ink behvior on the substrate depending on pigment content.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.76-82
• /
• 2000

The relative reactivities of branched and linear polycarbonates were investigated by measuring unreacted chloroformate concentration. It was found that the polymerization for the branched polymer proceeded ca. 10 times faster than that for the linear polymers. The effect of catalyst on a condensation step was studied by changing the amount of TEA (triethylamine) at $t_{0}$ and $t_{60}$ with keeping constant amount of TEA. The viscosity average molecular weight for the obtained branched polycarbonates were measured and compared with those of linear polycarbonates. It was found that the viscosity molecular weights of the obtained polymers decreased nonlinearly as wt % of added oligomer increased. The solution viscosities in methylenechloride for linear and branched polycarbonate increased nonlinearly as the content of polymer increased.

• Journal of Nutrition and Health
• /
• v.17 no.1
• /
• pp.41-49
• /
• 1984

Tannin from acorn was identified by TLC and gallic acid in the tannin was determined by HPLC. The tannin extracted with methanol-butanol was not dissolved in ethanol, methanol for HPLC and water, while the tannin extracted with acetone-ethylacetate was so pure that it could be used for HPLC-running. The gallic acid showed a Rf -value of 0.39, the digallic acid of 0.21, the trigallic acid of 0.09, and the gallotannin of 0.00 respectively. The content of gallic acid in the tannin from acorn powder was 3.04%, from acorn starch, 0.90%, and from acorn starch gels, 0.64-0.86% respectively. The effect of tannin contents on the viscosity of acorn atarch was also studied. The maximum and cooling viscosity of the starch were decreased as the contents of tannin increased.

• Transactions of Materials Processing
• /
• v.10 no.7
• /
• pp.558-564
• /
• 2001

An experimental modeling is applied to investigate the formation of forms in molten aluminum By using a specially designed equipment, the effect of process variables, such as the shape of stirrer, stirring velocity and fluid viscosity, on the formation of foams were studied in the glycerine added water. Bubbles formed in water had various diameter from 1 to 10 mm and the number of bubbles was 0 to 20/$cm^2$. It turned out that among various variables the stirring velocity and fluid viscosity played important roles on the formation of bubbles. The results obtained from the model experiment were preyed to be convincible also in the real aluminum foam.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.3
• /
• pp.48-55
• /
• 2003

This study investigates the effect of temperature and electric field strength on the Bingham characteristics of Electro-Rheological(ER) fluids which change their Yield shear stress and viscosity by temperature and electric field strength. It is found that under constant temperature the Yield sheal stress and viscosity of ER fluids proportionally increase with the applied electric field strength, and under constant applied electric field strength the Yield shear stress and viscosity of ER fluids decrease with the increasing temperature. These results are considered to be applied to the fluid and pneumatic power industry.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.9
• /
• pp.967-972
• /
• 2009

To investigate the vibration characteristics of compact disc player(CDP) due to excited vibration and disturbances, it is necessary to consider the transmissibility of the CDP. The disturbances as well as the temperature in the vehicle are the one of the important factors when CDP is designed. In this study, the effect on the temperature of the oil damper, which is applied to anti-vibration system of the CDP, was investigated. When the temperature was changed from $-30^{\circ}C$ to $90^{\circ}C$ and the properties of the oil damper (hardness of rubber, viscosity of oil) were changed, the transmissibility was measured. When the damper rubber has the large hardness, the difference of the transmissibility and natural frequency due to temperature showed the remarkable change as compared with the those of damper viscosity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.188-194
• /
• 1999

Fiber reinforced composite materials are widely used in automotive industry to produce parts that are large, thin. lightweight. strong and stiff. It is very important to know a charge shape in order to have good products in the compression molding. In particular, the product such as a bumper beam is composed of the random and unidirectional fiber mats. This study analyzes numerically the characteristics of flow fronts such as a bulging phenomenon made by changing viscosity of random mat and unidirectional fiber mat and slip parameters. And it is discussed that the effect of ratio of viscosity A and stack type on mold filling parameters