• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.99-107
• /
• 1984

Naked barley flour(Baekdong cultivar) was examined with respect to its pasting properties by means of Brabender amylograph after adding barley lipids, fatty acids, vegetable oils and emulsifiers at 1% level. Amylogram of barley flour showed a similar gelatinization temperature but higher paste viscosities at all reference points as compared with wheat flour. Barley flour showed lower amylograph curves by defatting with n-hexane, namely reductions in initial gelatinization point, maximum viscosity and setback value. But re-addition of n-hexane extract to the defatted flour essentially reproduced the curve obtained in the undefatted flour. Addition of polar and nonpolar lipids exhibited different effects on the pasting properties of barley flour. Polar lipids generally increased maximum viscosity a little while non-polar lipids increased the maximum viscosity substantially. Addition of increasing amounts of nonpolar lipids was found to progressively increase the maximum viscosity. Addition of fatty acids increaed th maximum viscosity and delayed the peak time. The maximum viscosity of defatted barley flour impregnated with unsaturated fatty acids was higher than that of defatted barley flour impregnated with saturated fatty acids Increasing amounts of linoleic acid were fount to progressively increase the maximum viscosity and to delay the peak time of defatted barley flour. Addition of six vegetable oils lowered the gelatinization temperature and rasied the maximum viscosity and temperature at maximum viscosity. Addition of increasing amount of peanut oil was found to decrease the maximum viscosity. The effect of emulsifiers was greater in undefatted flour than in defatted flour. The maximum viscosity of defatted flour was slightly affected by Methocel 50, Methocel 1500 and Emulthin, and substantially increased by Methocel 4000, sodium polyacrylate and calcium stearyl lactylate.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.769-777
• /
• 2002

Using four components - nonionic surfactants, water, hydrocarbon oil and an alcohol as cosurfactant, 12 types of cleaning agents were prepared, and their physical properties such as surface tension, viscosity, electroconductivity and phase stability were measured. As the formulated cleaning agents have low surface tensions(30.5-31.1 dyne/cm) and low viscosities (1.6-7.2 c.p.), they are satisfied with the general physical properties of water-in-oil(W/O) microemulsions for their industrial use. They showed a tendency that their temperature range for stable one-phase microemulsion decreased in accordance with the increase of alcohol/surfactant(A/S) ratio in the formulations. However, the temperature range of one-phase microemulsion was much more affected by hydrophilic lipophillic balance(HLB) value of the nonionic surfactant which increased its temperature range and it increased in accordance with the higher HLB value in the formulations. And the maximum content of water which can keep stable one-phase W/O microemulsion was measured at each sample. In addition, their temperature range for stable one-phase microemulsion was also measured. It was confirmed that the selection of surfactant type was very important for formulating a cleaning agent, since the W/O microemulsion system with the nonionic surfactant of the lower HLB value showed better cleaning efficacy that of the higher HLB value for abietic acid as a soil, which was used for preparing a rosin-type flux. In the formulated cleaning agents with the increase of A/S ratio in the formulations, however, there was no significant difference in cleaning efficacy. It was investigated that the differences of their cleaning efficacy was affected by the change of the condition of temperature and sonicating frequency as important factors in the industrial cleaning. That is, the higher, their cleaning temperature and the lower, their sonicating frequency, the more increased, their cleaning efficacy. Furthermore, using optical instruments like UV/Visable Spectrophotometer and FT-IR Spectrometer, their cleaning efficacy for abietic acid was measured. The removal of soil from the contaminated rinse water was measured by gravity separation method in the rinse bath. As a result, the cleaning agent system having the nonionic surfactant of HLB value 6.4 showed over 85% water-oil separation efficacy at over $25^{\circ}C$. Therefore, it was demonstrated in this work that the formulating cleaning agents were very effective for cleaning and economical in the possible introduction of water recycling system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1270-1277
• /
• 2014

This study investigated the quality characteristics of instant rice noodles manufactured with broken rice flour as an application of rice-processed products. We examined the physicochemical characteristics of common rice flour (CRF), broken rice flour (BRF), and CRF mixed with BRF (CBRF). Futhermore, instant rice noodles were manufactured with these three types of rice flour, and their quality and sensory characteristics were also investigated. Damaged starch content and water-binding capacity of rice flour were highest in BRF. Particle size of rice flour was significantly different among the three types. RVA pasting viscosities of BRF and CBRF were higher than that of CRF. Volume after cooking of instant rice noodles increased in rice noodles made with broken rice flour (BRN). Turbidity and cooking loss of BRN were higher than those of common rice noodles (CON). For texture properties, CON displayed the highest hardness, adhesiveness, and chewiness. In the sensory evaluation, springiness and overall acceptability values of CON were significantly higher than those of other rice noodle types (BRN and CBRN). In conclusion, BRN showed increased cooking loss and turbidity with reduced texture and overall acceptability values. The results of this study suggest that added amount of CRF may significantly increase the overall quality of instant rice noodles prepared with BRF.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.98-133
• /
• 1987

The mechanical and rheological properties of agricultural materials are important for engineering design and analysis of their mechanical harvesting, handling, transporting and processing systems. Agricultural materials, which composed of structural members and fluids do not react in a purely elastic manner, and their response when subjected to stress and strain is a combination of elastic and viscous behavior so called viscoelastic behavior. Many researchers have conducted studies on the mechanical and rheological properties of the various agricultural products, but a few researcher has studied those properties of rice plant, and also those data are available only for foreign varieties of rice plant. This study are conducted to experimentally determine the mechanical and the rheological properties such as axial compressive strength, tensile strength, bending and shear strength, stress relaxation and creep behavior of rice stems, and grain detachment strength. The rheological models for the rice stem were developed from the test data. The shearing characteristics were examined at some different levels of portion, cross-sectional area, moisture content of rice stem and shearing angle. The results obtained from this study were summarized as follows 1. The mechanical properties of the stems of the J aponica types were greater than those of the Indica ${\times}$ Japonica hybrid in compression, tension, bendingand shearing. 2. The mean value of the compressive force was 80.5 N in the Japonica types and 55.5 N in the Indica ${\times}$ Japonica hybrid which was about 70 percent to that of the Japonica types, and then the value increased progressively at the lower portion of the stems generally. 3. The average tensile force was about 226.6 N in the Japonica types and 123.6 N in the Indica ${\times}$ Japonica hybrid which was about 55 percent to that of the Japonica types. 4. The bending moment was $0.19N{\cdot}m$ in the Japonica types and $0.13N{\cdot}m$ in the Indica ${\times}$ Japonica hybrid which was 68 percent to that of the Japonica types and the bending strength was 7.7 MPa in the Japonica types and 6.5 MPa in the Indica ${\times}$ Japonica hybrid respectively. 5. The shearing force was 141.1 N in Jinju, the Japonica type and 101.4 N in Taebaeg, the Indica ${\times}$ Japonica hybrid which was 72 percent to that of Jinju, and the shearing strength of Taebaeg was 63 percent to that of Jinju. 6. The shearing force and the shearing energy along the stem portion in Jinju increased progressively together at the lower portions, meanwhile in Taebaeg the shearing force showed the maximum value at the intermediate portion and the shearing energy was the greatest at the portion of 21 cm from the ground level, and also the shearing strength and the shearing energy per unit cross-sectional area of the stem were the greater values at the intermediate portion than at any other portions. 7. The shearing force and the shearing energy increased with increase of the cross-sectional area of the rice stem and with decrease of the shearing angie from $90^{\circ}$ to $50^{\circ}$. 8. The shearing forces showed the minimum values of 110 N at Jinju and of 60 N at Taebaeg, the shearing energy at the moisture content decreased about 15 percent point from initial moisture content showed value of 50 mJ in Jinju and of 30 mJ in Taebaeg, respectively. 9. The stress relaxation behavior could be described by the generalized Maxwell model and also the compression creep behavior by Burger's model, respectively in the rice stem. 10. With increase of loading rate, the stress relaxation intensity increased, meanwhile the relaxation time and residual stress decreased. 11. In the compression creep test, the logarithmic creep occured at the stress less than 2.0 MPa and the steady-state creep at the stress larger than 2.0 MPa. 12. The stress level had not a significant effect on the relaxation time, while the relaxation intensity and residual stress increased with increase of the stress level. 13. In the compression creep test of the rice stem, the instantaneous elastic modulus of Burger's model showed the range of 60 to 80 MPa and the viscosities of the free dashpot were very large numerical value which was well explained that the rice stem was viscoelastic material. 14. The tensile detachment forces were about 1.7 to 2.3 N in the Japonica types while about 1.0 to 1.3 N in Indica ${\times}$ Japonica hybrid corresponding to 58 percent of Japonica types, and the bending detachment forces were about 0.6 to 1.1 N corresponding to 30 to 50 percent of the tensile detachment forces, and the bending detachment of the Indica ${\times}$ Japonica hybrid was 0.1 to 0.3 N which was 7 to 21 percent of Japonica types. 15. The detachment force of the lower portion was little bigger than that of the upper portion in a penicle and was not significantly affected by the harvesting period from September 28 to October 20. 16. The tensile and bending detachment forces decreased with decrease of the moisture content from 23 to 13 percent (w.b.) by the natural drying, and the decreasing rate of detachment forces along the moisture content was the greater in the bending detachment force than the tensile detachment force.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.311-321
• /
• 2008

In order to improve the insufficient protein content of Jeung-Pyun with respect to sitology, as well as its fermentation process, this study prepared Jeung-Pyun doughs containing 0, 5, 10, 15, and 20 g of milk, respectively, and examined their mechanical and functional characteristics. The internal structure of the Jeung-Pyun was observed by SEM. With regard to color, the L-value increased with increasing amounts of added milk, and the highest value (65.43) occurred in the group containing 20 g of added milk; however, there were no significant differences among groups. The group containing 20 g of added milk also presented the highest a-value, and the samples with added milk had higher b-values than the control. At 8 hours of fermentation, the 10 g- and 15 g-added milk groups had viscosities of 5726.67 and 6600 respectively; viscosity increased with increasing amounts of milk, and the added-milk groups had significantly higher values than the control group. Hardness also increased with increasing amounts of added milk. However, there were no significant differences in resilience and cohesive power among the groups. The groups containing 5 and 10 g of added milk had the lowest cohesion and break values. For appearance, the group without added milk had the whitest color. Pore size decreased and showed less uniformity as the amount of added milk increased. The unique tackju aroma of Jeung-Pyun decreased significantly as the level of added milk increased, and the 20 g addition presented the lowest value. The 10 g-added milk group had the highest level of sweetness, and sourness increased with increasing amounts of added milk. For softness, the control group was estimated as slightly softer than the added-milk groups. The stickiest sample was generally preferred when considering taste, white color, and sweetness. Among the quality characteristics, having greater stickiness, resilience, moisture, and softness was better in terms of chewing. Overall, the size of the Jeung-Pyun containing 10 g of milk was even and well-developed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.2
• /
• pp.117-125
• /
• 2013

In this study, The stability of a cream containing the ethyl acetate fraction of 50% ethanol extracts from Glycyrrhiza uralensis (G. uralensis) cultured in Korea was investigated. pH, absorbance, viscosity and color difference of the cream containing 0.20% ethyl acetate fraction of the aforementioned G. uralensis extracts were measured under 4 different temperature conditions ($4^{\circ}C$ $25^{\circ}C$ $37^{\circ}C$ and $45^{\circ}C$) and under the sun light at 2 week intervals for 12 weeks. pH changes of a control cream without the extracts and the sample cream containing 0.20% ethyl acetate fraction of G. uralensis extracts were 0.66 and 0.44, respectively. There were no significant pH differences between the sample and the control under the sun. Viscosities of the control cream and the sample cream decreased by 2,483 cPs and 2,893 cPs respectively. So, the sample cream showed a bigger decline (410 cP) in viscosity than the control cream. The ethyl acetate fraction of G. uralensis extracts did not affect the stability of the cream. Absorbance of ethanol solution of the ethyl acetate fraction decreased 30.00% at 276 nm under the sun. On the other hand, the absorbance of the sample cream containing the ethyl acetate fraction decreased 12.02%. The stability of the G. uralensis extracts was better in cream formulation than in ethanol solution. The total color differences of all creams increased slightly during the study period under various conditions. The results appeared to indicate the color stability of the cream containing 0.20% ethyl acetate fraction of G. uralensis extracts. It is suggested that further study is needed to provide more information to the manufacturers who are seeking for the application of the G. uralensis extracts to improve the anti-oxidant and stability of cosmetic products.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.776-782
• /
• 2005

The effects of purification using ${\alpha}-amlyase$ (Termamyl 120L) on physicochemical properties of ${\beta}-glucan$ from oat bran were studied. Four fractions were selected as fraction A ($55^{\circ}C$, 15%, pH 6), fraction B ($45^{\circ}C$, 15%, pH 6), fraction C ($50^{\circ}C$, 0%, pH 7), and fraction D ($50^{\circ}C$, 10%, pH 5) from the result of physiological test, and three consecutive subfractions were obtained by repeated ${\alpha}-amlyase$ treatments on the each fractions. The contents of ${\beta}-glucan$, protein, and ash after purification were in 81.4-88.2%, 4.1-6.3% and 2.6-6.2%, respectively. The apparent viscosities of purified ${\beta}-glucan$ aqueous solutions were similar to those of hydroxy methyl cellulose. Glucose was a major monosaccharide of ${\beta}-glucan$ extracts, and xylose and arabinose were also detected as minor constituents on TLC. The average molecular weight ranged $2.0{\times}10^6-5.1{\times}10^6$ and was decreased after purification. From the result of the differential scanning calorimetry, the melting point ranged $130-140^{\circ}C$ with purification step and thermal transition enthalpy was increased. The ratio of ${\beta}-(1{\rightarrow}3)\;to\;{\beta}-(1{\rightarrow}4) $ linkages were 1:2.22-1:2.52, and increased up to 1:5.50 after purification.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.2
• /
• pp.177-186
• /
• 2010

This study was carried out to compare the physicochemical characteristics and preference as a sensory quality of Sogokju (Korean traditional rice wine) from waxy rice varieties. The protein and moisture contents of milled waxy rice varieties were ranged 6.9~7.2% and 12.1~ 12.6%, respectively. Nunbora had the largest grain size. In pasting properties, Hangangchalbyeo had the highest peak, trough and final viscosities, and Dongjinchalbyeo had the lowest viscosity curve. These differences suppose to be caused by the amylopectin(AP) structure: Dongjinchalbyeo has the largest short AP chains (degree of polymerization (DP) 6-12) and the smallest middle AP chains (DP 13-24) in 9 waxy rice varieties, while Hangangchalbyeo has the smallest short AP chains and the largest middle AP chains. The alcohol contents of Sogokju brewed from 9 waxy rice varieties were 17.6～19.9%. The brix degree were ranged $20.5{\sim}23.9^{\circ}Bx$. The organic acid of Sogokju consisted mainly of succinic acid, and the free sugar of it consisted mostly of glucose. The sensory evaluation showed the highest palatability at the Sogokju from Baegseolchalbyeo. The palatability was positively correlated with the brix degree, the glucose content, and the turbidity, and negatively correlated with the production yield of Sogokju.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.5
• /
• pp.880-888
• /
• 2017

Palatability and texture analysis of nine Korean rice cultivars were investigated to select the most appropriate rice variety for the cooked-rice processing. The rice cultivars studied consisted of Samkwang, Seonpum, Wolbaek, Andabyeo, Dasan-1, Ilpum, Haiami, Jungsanggold and Chindle. They revealed the moisture, protein, amylose and starch contents of 10~12, 5~6, 12~19, and approximately 90%, respectively. Among the evaluated rice varieties, WB exhibited the lowest amylose content (12.7%) and Jungsanggold the next (17.2%). In the rapid-visco analyzer test, Jungsanggold, Chindle, Wolbaek and Seonpum revealed a low value of final and setback viscosities than other varieties. Using a toyo meter analyzer, Chindle, Haiami, Samkwang were selected as having high toyo palatability values, while Dasan-1, Wolbaek and Andabyeo revealed low values. Toughness and adhesiveness of all nine cooked rice varieties were highest in Jungsanggold, Chindle and Ilpum. Also, palatability of cooked rice was highest in the following order: Chindle (80.03) > Samkwang (76.21) > Jungsanggold (74.08). The results of this study suggest that Chindle may be effectively used to produce processed cooked rice.