• 제목/요약/키워드: Viscosities

검색결과 574건 처리시간 0.044초

제분방법에 따른 품종별 쌀가루의 이화학적 특성 및 소화율 (Physicochemical Properties of Rice Flour of Different Cultivars using Wet and Dry Milling Processes)

  • 박지영;이석기;박혜영;최혜선;조동화;이경하;한상익;조준현;오세관
    • 한국작물학회지
    • /
    • 제62권3호
    • /
    • pp.184-192
    • /
    • 2017
  • 본 연구는 아밀로스 함량이 다양한 5가지 쌀 품종별 제분방법에 따른 쌀가루 이화학적, 식품학적 특성을 분석하고 다양한 가공이용성 구명을 위한 기초자료로 활용하고자 한다. 1. 품종별 습식 및 건식 쌀가루의 수분특성을 분석한 결과, $50^{\circ}C$에 비해 $80^{\circ}C$에서 건식쌀가루의 WAI, WSI가 가장 높은 결과를 나타내었고, 특히 '백옥찰'이 높은 수분흡착 및 수분용해지수를 나타내었다. 팽윤력의 경우는 아밀로스 함량과 부의상관관계를 보였고, 습식보다는 건식쌀가루의 팽윤력이 높았다. 2. 손상전분 함량은 건식쌀가루에서 높았고, 품종별 손상전분 함량은 '백옥찰>새고아미>미호>도담쌀>일품' 순으로 나타났다. 습식쌀가루의 손상전분 함량은 '백옥찰>미호>일품>새고아미>도담쌀'로 나타나 아밀로스 함량과 부의 상관관계를 보였다. 3. 가용전분함량은 '일품과 새고아미'를 제외하고, 습식으로 제분하였을 때 증가하였고, 저항전분함량은 '도담쌀'을 제외하고는 제분방법 관계없이 1% 미만이었다. '도담쌀'의 건식쌀가루 저항전분 함량은 9.18로서 습식쌀가루 6.27에 비하여 높게 나타나 가공용도에 따라서는 건식제분이 효과적일 것으로 보였다. 4. 건식쌀가루가 습식쌀가루에 비해 최고점도 및 최저점도가 높았으며, 치반점도의 경우 제분방법에 관계없이 '백옥찰'이 가장 낮은 결과를 보였다. 고아밀로스 '도담쌀'의 경우, 제분방법 및 온도변화 관계없이 점도변화가 크지 않았으며 점도가 가장 낮은 특성을 보였다. 5. 제분방법에 다른 쌀가루 품종별 혈당지수는 57.6~81.3의 범위를 나타내었고, 습식 제분 했을 경우 혈당지수가 올라가는 경향을 보였으며, '도담쌀'을 제외하고는 품종간 차이는 두드러지지 않았다. '일품과 새고아미'의 건식쌀가루의 혈당지수는 낮은 경향을 나타내었고, 특히 '도담쌀'은 가장 낮은 전분 가수분해 지수 및 혈당지수를 나타내었다.

지방질성분(脂肪質成分)이 보리가루의 Amylograph특성(特性)에 미치는 영향 (Effect of Lipid Constituents on the Amylograph Characteristics of Barley Flour)

  • 최인숙;이서래
    • 한국식품과학회지
    • /
    • 제16권1호
    • /
    • pp.99-107
    • /
    • 1984
  • 지방질(脂肪質)과 유화제(乳化?)가 보리가루의 점조성에 미치는 영향(影響)을 알아보기 위하여 쌀보리품종(品種)인 백동을 분말로 만들어 각종(各種) 첨가물질(添加物質)을 1%목준(木準)으로 동일(同一)하게 첨가(添加)하고, 그 점조성을 Brabender Amylograph를 사용(使用)하여 측정하였다. 보리가루의 amylogram 점성은 밀가루에 비하여 높으며 최고점도는 밀가루의 3배가 되었다. 유리지방질(遊離脂肪質)을 제거한 보리가루의 점도곡선(曲線)은 탈지(脫脂)하지 않은 것에 비하여 낮게 나타났으며, 호화개시온도와 최고점도가 저하되었다. 이때 추출(抽出)한 유리지방질(遊離脂肪質)을 원래의 수준(水準)으로 다시 첨가(添加)하여 그 점도곡선(曲線)은 탈지(脫脂)하지 않은 보리가루의 점도곡선(曲線)과 잘 일치(一致)되었다. 보리추출지방질(抽出脂肪質)을 결합(結合) 및 유리지방질(遊離脂肪質), 극성(極性) 및 비극성지방질(非極性脂肪質)로 분리(分離)하여 첨가(添加)한 경우 결합지방질(結合脂肪質)의 호화양상은 극성지방질(極性脂肪質)과 비슷한 양상을 나타내었으며, 유리지방질(遊離脂肪質)은 비극성지방질(非極性脂肪質)과 비슷한 양상을 나타내었다. 비극성지방질(非極性脂肪質)의 첨가시(添加時)에는 최점도가 상승되었으며, 극성지방질(極性脂肪質)의 첨가시(添加時)에는 최고점도에 별다른 영향(影響)이 나타나지 않았다. 지방산(脂肪酸)의 첨가시(添加時), 탈지(脫脂)보리가루의 최고점도와 그때의 온도는 상승하는 경향(傾向)이었다. 지방산의 첨가효과(添加?果)는 포화지방산(脂肪酸)보다 불포화지방산(脂肪酸)의 경우 크게 나타났으며, 포화지방산중(脂肪酸中)에서는 팔미트산과 미리스트산의 경우에 가장크게 나타났다. 식물성기름을 첨가(添加)한 경우 호화개시온도는 다소 감소(減少)되었으며, 최고점도와 그때의 온도는 약간 상승되었다. 또한 식물성 기름의 첨가수준(添加水準)을 높이면 최고점도는 다소 감소(減少)되는 경향(傾向)이었다. 유화제(乳化劑)의 첨가(添加)는 탈지(脫脂)한 보리가루에서 보다는 탈지(脫脂)하지 않은 보리가루에서 점도의 상승효과(上昇? 果)가있었다. 탈지(脫脂)보리가루에 있어서 M-ethocel 4000, sodium polyacrlate, calcium stearyl lactyalte는 최고점도를 상승(上昇)시켰으며, 특(特)히 calcium stearyl lactylate는 냉각점도를 크게 상승(上昇)시켰다.

  • PDF

W/O Microemulsion 세정제의 물성 및 세정성 평가 (Evaluation of Cleanness and Physical Properties of W/O Microemulsion)

  • 이명진;한지원;이호열;한상원;배재흠;박병덕
    • Korean Chemical Engineering Research
    • /
    • 제40권6호
    • /
    • pp.769-777
    • /
    • 2002
  • Nonionic surfactant/water/탄화수소 오일/alcohol의 4성분계 시스템에서 12종의 조성물을 제조하여 물성 평가를 수행한 결과, 30.5-31.1 dyne/cm의 낮은 표면장력의 값과, 1.6-7.2 c.p.의 낮은 점도의 물성을 보여 산업용 세정제로서의 기본 물성을 보여주었다. 이들 조성물들이 안정한 단일상으로 존재하는 온도의 범위는 alcohol/surfactant(A/S)비의 증가에 따라 감소되는 경향을 보이고 있으나, 전체적으로는 계면활성제의 hydrophilic lipophilic balance(HLB) 값에 크게 영향을 받고 있으며, HLB 값이 높을수록 안정하게 존재하는 온도 영역이 증가되는 경향을 보여주고 있다. 그리고 각각의 조성물에 물의 함량을 증가 시켜 안정한 단일상이 유지되는 물의 최대 함유량을 측정한 결과 HLB 값이 낮은 계면활성제를 사용하였을 경우 HLB 값이 6.4인 비이온 계면활성제를 사용할 경우 22.1%까지도 물을 함유할 수 있었고, 물의 양이 증가됨에 따라서 단일상으로 존재하는 온도영역은 좁아졌다. 오염원으로 플럭스 제조에 사용되는 abietic acid에 대한 세정 효율을 UV/Visable Spectrophotometer와 FT-IR Spectrometer와 같은 분석기기를 이용하여 검토하여 본 결과, 비이온 계면활성제의 HLB 값이 낮을수록 높은 세정 효율을 보여주어, W/O microemulsion의 경우 비이온 계면활성제에 따른 세정력의 변화가 매우 큼을 확인 할 수 있었다. 그러나 A/S의 비가 증가에 따른 세정효율의 차이는 별다른 경향을 보이지 않았다. 또한 산업세정에 있어서 중요한 세정 요소로 작용하는 변수인 온도 변화와 초음파 주파수의 변화에 따른 세정효율을 측정한 결과, 온도가 높을수록 그리고 초음파의 주파수가 낮을수록 높은 세정력을 보여주었다. 세정 공정 중 린스조에서의 유분 오염물이 함유된 린스액의 유수분리 효율을 측정한 결과, HLB 값이 6.4인 비이온 계면활성제를 사용한 시스템의 경우 $25^{\circ}C$ 이상에서 85% 이상의 높은 제거 효율을 보여, 효율적인 세정 및 관리가 가능한 것으로 판단되었다.

파쇄미 쌀가루를 이용한 즉석 쌀국수의 품질특성 (Quality Characteristics of Instant Rice Noodles Manufactured with Broken Rice Flour)

  • 최은지;김창희;김영붕;금준석;정윤화;박종대
    • 한국식품영양과학회지
    • /
    • 제43권8호
    • /
    • pp.1270-1277
    • /
    • 2014
  • 쌀국수 분야에서 쌀의 도정 부산물인 파쇄미의 이용을 증대시키고 쌀국수 소재로서의 가능성을 평가하고자, 일반미 쌀가루, 파쇄미 쌀가루, 일반미와 파쇄미 혼합 쌀가루의 이화학적 특성을 조사하고 이들 쌀가루를 60% 첨가한 즉석 쌀국수를 제조하였으며, 쌀국수의 조리품질과 관능적 품질특성을 비교하였다. 원료 쌀가루의 손상전분 함량과 수분결합능력은 파쇄미 쌀가루가 가장 높았으며, 호화점도에서 setback은 파쇄미 쌀가루와 일반미 및 파쇄미 혼합 쌀가루가 유의적으로 가장 높았다. 쌀국수의 조리 후 수분흡수율은 대조구로 사용한 일반미 쌀국수가 유의적으로 가장 높았으며 파쇄미 쌀가루로 제조한 쌀국수는 대조구보다 조리 후 부피가 증가하였다. 파쇄미와 일반미 쌀가루를 혼합하여 제조한 쌀국수는 조리손실률과 조리수의 탁도가 대조구보다 높게 나타났다. 기계적 조직감에서 파쇄미 쌀국수와 파쇄미 및 일반미 혼합 쌀국수는 대조구보다 경도, 부착성 및 씹힘성이 낮은 조직감 특성을 나타내었다. 정량적 묘사분석에서 탄력성, 씹힘성은 대조구가 5점 이상을 나타내어 파쇄미 쌀국수와 비교하여 상대적으로 쫄깃한 조직감을 가지는 것으로 평가되었다. 전반적 기호도는 일반미 쌀가루만으로 제조한 대조구가 유의적으로 가장 높게 평가되었다. 이상의 결과로부터 파쇄미와 일반미 혼합 쌀가루로 제조한 쌀국수는 조직감과 전반적 기호도에서 파쇄미 단일 쌀가루로 제조한 쌀국수와 유의차가 없어 일반미 쌀가루를 첨가함으로써 품질개선을 기대하였으나 관능특성에서 큰 차이는 없었다. 따라서 파쇄미 쌀가루를 이용하여 즉석 쌀국수를 제조할 때 조리품질 및 조직감 향상을 위하여 일반미 쌀가루의 혼합량을 조절하는 것이 파쇄미 쌀가루를 이용한 쌀국수 제조에 바람직하다고 생각된다.

수도(水稻)의 역학적(力學的) 및 리올러지 특성(特性)에 관(關)한 연구(硏究) (Mechanical and Rheological Properties of Rice Plant)

  • 허윤근;차균도
    • 농업과학연구
    • /
    • 제14권1호
    • /
    • pp.98-133
    • /
    • 1987
  • The mechanical and rheological properties of agricultural materials are important for engineering design and analysis of their mechanical harvesting, handling, transporting and processing systems. Agricultural materials, which composed of structural members and fluids do not react in a purely elastic manner, and their response when subjected to stress and strain is a combination of elastic and viscous behavior so called viscoelastic behavior. Many researchers have conducted studies on the mechanical and rheological properties of the various agricultural products, but a few researcher has studied those properties of rice plant, and also those data are available only for foreign varieties of rice plant. This study are conducted to experimentally determine the mechanical and the rheological properties such as axial compressive strength, tensile strength, bending and shear strength, stress relaxation and creep behavior of rice stems, and grain detachment strength. The rheological models for the rice stem were developed from the test data. The shearing characteristics were examined at some different levels of portion, cross-sectional area, moisture content of rice stem and shearing angle. The results obtained from this study were summarized as follows 1. The mechanical properties of the stems of the J aponica types were greater than those of the Indica ${\times}$ Japonica hybrid in compression, tension, bendingand shearing. 2. The mean value of the compressive force was 80.5 N in the Japonica types and 55.5 N in the Indica ${\times}$ Japonica hybrid which was about 70 percent to that of the Japonica types, and then the value increased progressively at the lower portion of the stems generally. 3. The average tensile force was about 226.6 N in the Japonica types and 123.6 N in the Indica ${\times}$ Japonica hybrid which was about 55 percent to that of the Japonica types. 4. The bending moment was $0.19N{\cdot}m$ in the Japonica types and $0.13N{\cdot}m$ in the Indica ${\times}$ Japonica hybrid which was 68 percent to that of the Japonica types and the bending strength was 7.7 MPa in the Japonica types and 6.5 MPa in the Indica ${\times}$ Japonica hybrid respectively. 5. The shearing force was 141.1 N in Jinju, the Japonica type and 101.4 N in Taebaeg, the Indica ${\times}$ Japonica hybrid which was 72 percent to that of Jinju, and the shearing strength of Taebaeg was 63 percent to that of Jinju. 6. The shearing force and the shearing energy along the stem portion in Jinju increased progressively together at the lower portions, meanwhile in Taebaeg the shearing force showed the maximum value at the intermediate portion and the shearing energy was the greatest at the portion of 21 cm from the ground level, and also the shearing strength and the shearing energy per unit cross-sectional area of the stem were the greater values at the intermediate portion than at any other portions. 7. The shearing force and the shearing energy increased with increase of the cross-sectional area of the rice stem and with decrease of the shearing angie from $90^{\circ}$ to $50^{\circ}$. 8. The shearing forces showed the minimum values of 110 N at Jinju and of 60 N at Taebaeg, the shearing energy at the moisture content decreased about 15 percent point from initial moisture content showed value of 50 mJ in Jinju and of 30 mJ in Taebaeg, respectively. 9. The stress relaxation behavior could be described by the generalized Maxwell model and also the compression creep behavior by Burger's model, respectively in the rice stem. 10. With increase of loading rate, the stress relaxation intensity increased, meanwhile the relaxation time and residual stress decreased. 11. In the compression creep test, the logarithmic creep occured at the stress less than 2.0 MPa and the steady-state creep at the stress larger than 2.0 MPa. 12. The stress level had not a significant effect on the relaxation time, while the relaxation intensity and residual stress increased with increase of the stress level. 13. In the compression creep test of the rice stem, the instantaneous elastic modulus of Burger's model showed the range of 60 to 80 MPa and the viscosities of the free dashpot were very large numerical value which was well explained that the rice stem was viscoelastic material. 14. The tensile detachment forces were about 1.7 to 2.3 N in the Japonica types while about 1.0 to 1.3 N in Indica ${\times}$ Japonica hybrid corresponding to 58 percent of Japonica types, and the bending detachment forces were about 0.6 to 1.1 N corresponding to 30 to 50 percent of the tensile detachment forces, and the bending detachment of the Indica ${\times}$ Japonica hybrid was 0.1 to 0.3 N which was 7 to 21 percent of Japonica types. 15. The detachment force of the lower portion was little bigger than that of the upper portion in a penicle and was not significantly affected by the harvesting period from September 28 to October 20. 16. The tensile and bending detachment forces decreased with decrease of the moisture content from 23 to 13 percent (w.b.) by the natural drying, and the decreasing rate of detachment forces along the moisture content was the greater in the bending detachment force than the tensile detachment force.

  • PDF

우유 첨가에 따른 증편의 품질 선택 (Quality Characteristics of Jeung-Pyun Prepared with Milk)

  • 장정선;박영선
    • 동아시아식생활학회지
    • /
    • 제18권3호
    • /
    • pp.311-321
    • /
    • 2008
  • 본 연구는 증편의 활용도를 높이고 영양적인 측면에서 증편의 부족한 단백질을 보완하기 위하여 우유를 0, 5, 10, 15, 20 g 첨가하여 제조한 반죽 및 증편의 발효 과정에 따른 기 계적 특성, 관능적 특성을 검사하고 SEM을 사용하여 증편의 내부 구조를 관찰하였으며, 그 결과는 다음과 같다. 1. 색도 측정에 있어서 L값은 우유의 첨가량이 많아질수록 증가하여 20 g 첨가군이 65.43으로 가장 높게 나타났으며 유의적인 차이는 없었다. a값 역시 우유 20 g 첨가군이 가장 높게 나타났으며, b값은 우유 첨가군이 대조군에 비해 유의 적으로 높은 경향을 나타내었다(p<.001). 2. 우유 10, 15 g을 첨가군에 있어서 발효 8시간의 점도는 각각 5,726.67 cp, 6,600 cp로 첨가량이 많아질수록 높아지는 경향을 나타내었으며, 우유 첨가군이 대조군에 비해 유의적 으로 높았다(p<.00 1). 3. 경도는 첨가군에 있어서는 첩가량이 증가할수록 높게 나타났으며, 탄력성과 응집성은 대조군과 첨가군간의 유의 차가 없었으며, 검성과 부서짐성은 우유 5, 10 g 첨가군이 낮게 나타났다. 4. 우유를 첨가한 증편의 부피범위는 $236.67{\sim}255.00\;mL$이며, 대조군이 208.33 mL로 가장 낮았으며, 우유 첨가 10 g (255.00 mL)을 기점으로 감소하였다. 비체적의 경우도 부피와 비슷한 경향이었으며, 팽화도는 우유 $5{\sim}20\;g(128.28{\sim}133.12%)$ 첨가군이 대조군(122.65%)에 비해 높았으나 유의적인 차이는 없었다. 5. 관능검사 결과, 증편의 기공은 우유의 첨가량이 많아질 수록 크기가 작아지고 불균일한 것으로 평가되었으며, 20 g 첨가군이 가장 낮은 수치이었다. 증편 특유의 탁주향은 우유 첨가량이 많아칠수록 유의적으로 감소하여(p<.001) 20 g 첨 가군에서 가장 낮게 나타났다. 신맛은 첨가량이 많아질수록 높아져 15, 20 g 첨가군에서 높은 경향이었다. 부드러움에 있어서는 우유 무첨가군 시료가 첨가군 시료보다 다소 부드 럽다고 평가되었으며, 첨가군에서는 15, 20 g 첨가한 것이 동일하게 부드렵다고 응답하였다. 전체적인 바람직성에 있어서는 대조군, 우유 5, 10 g을 첨가한 군이 선호도가 일치한 것으로 나타났다. 6. 전체적인 기호도에 있어서 색이 흴수록, 단맛이 강하고 쫄깃할수록 더 선호했으며 신맛이 강할수록 전체적인 기호도는 좋지 않았다. 또한, 부드러우며 찰기가 클수록 전체적인 기호도가 높았다. 관능 특성치들간에는 졸깃할수록 탄력성이 크 고 촉촉하며, 부드러울수록 씹힘성이 좋은 것으로 측정되었다. 7. 전반적으로 우유 첨가량이 적은 것이 기공의 크기가 크고 첨가량이 많아질수록 기공의 크기가 작아지는 경향을 볼 수 있었다. 5 g 첨가군은 대조군에 비해서 기공이 커졌으며, 15, 20 g 첨가한 군은 대조군에 비해서 기공이 작아지고 불균일하였다. 전체적으로 우유 10 g 첨가 증편의 기공 크기와 균일한 정도가 잘 발달되어 있음을 관찰할 수 있었다. 이상의 결과를 종합하여 볼 때 기계적 특성과 내부 구조를 관찰함에 있어서 우유 10 g을 첨가한 증편의 경우가 경도, 기공의 균일함 등이 가장 바람직하게 평가되었다. 관능검사에서는 대조군과 우유 5, 10 g 첨가 증편의 기호도가 일치하였으나 건강에 대한 관심이 높아지고 있는 시점에서 볼 때 우유 10 g을 첨가하는 것이 바람직한 것으로 판단되었다. 또한, 우유의 첨가로 인하여 단백질 보완 효과도 있는 것으로 확인 되어 기능성 증편 제조의 활성화에 기여할 것으로 생각된다.

  • PDF

한국산 감초 추출물 함유 크림의 안정성 평가 (A Study on the Stability of the Cream Containing Glycyrrhiza uralensis Extract)

  • 김혜진;장하나;배정윤;박수남
    • 대한화장품학회지
    • /
    • 제39권2호
    • /
    • pp.117-125
    • /
    • 2013
  • 본 연구에서는 한국산 감초의 50% 에탄올 추출물로부터 얻은 에틸아세테이트 분획을 함유한 크림의 안정성을 평가하였다. 감초추출물의 0.20% 에틸아세테이트 분획을 함유한 크림에 대하여 12주 동안 온도별 저장조건($4^{\circ}C$, $25^{\circ}C$, $37^{\circ}C$, $45^{\circ}C$)과 태양광선(2013년 3 평균온도 : $5.10^{\circ}C$, 4 ~ 5월 평균온도 : $14.10^{\circ}C$) 노출조건하에서 2주 간격으로 pH, 흡광도 및 점도 변화와 1주 간격으로 색도 변화를 측정하였다. 온도별 저장 조건에서 감초 추출물을 함유한 시료 크림의 pH 변화는 0.44로 추출물을 함유하지 않은 대조군 크림(0.66)보다 pH 변화 값이 작았다. 태양광선하에서는 pH 변화는 대조군과 시료군에서 큰 차이가 없었다. 온도별 저장조건에서 대조 크림의 점도는 평균 2,483 cPs 감소하였고 시료 크림은 평균 2,893 cPs 감소하였다. 시료 크림이 대조크림보다 평균 410 cP 감소를 나타내었다. 감초출물이 크림 점도에 큰 영향을 미치지는 않았다. 감초 추출물 에탄올 용액의 태양광선하에서 276 nm에서의 흡광도는 30.00% 감소하였다. 반면에 감초추출물 함유 크림의 경우는 동일 조건에서 흡광도가 12.02% 감소하였다. 감초추출물이 크림 속에서 비교적 안정함을 나타내었다. 색도 측정에서 대조 크림에서는 색차가 거의 일어나지 않았다. 시료 크림은 색차가 조금 증가하였으나 안정성에 크게 영향을 끼치지 않았다. 이상의 결과들로부터 한국산 감초 추출물 함유 크림 제형은 비교적 안정함을 확인하였다. 향후 제품에 응용 시 감초 추출물의 항산화 효과가 발휘할 수 있도록 보완 연구가 이루어진다면 화장품에의 응용이 가능할 것으로 사료된다.

귀리 ${\beta}-glucan$${\alpha}-amlyase$를 이용한 정제와 이화학적 특성 (Purification of Oat ${\beta}-Glucan$ by ${\alpha}-Amlyase$ Treatment and Characterization of Its Physicochemical Properties)

  • 박희정;강태수;이희봉;김광엽;장금일;노영희;정헌상
    • 한국식품과학회지
    • /
    • 제37권5호
    • /
    • pp.776-782
    • /
    • 2005
  • 생리활성이 우수한 귀리추출물 4개 분획인 A분획($55^{\circ}C$, 15%, pH 6), B분획($45^{\circ}C$, 15%, pH 6), C분획($50^{\circ}C$, 0%, pH 7) 및 D분획($50^{\circ}C$, 10%, pH 5)을 대상으로 산업적인 정제가능성을 조사하기 위하여, 식품용 전분 분해 효소$({\alpha}-amlyase)$를 사용하여 정제하면서 ${\beta}-glucan$의 특성변화를 조사하였다. 추출물 상등액에 $({\alpha}-amlyase)$를 가하고 $95^{\circ}C$에서 1시간 반응하는 과정을 3회 반복하여 각 시료당 3개의 하위분획을 얻었다. 최종 정제 후 81.4-88.2% 순도의 ${\beta}-glucan$을 얻었고, 단백질 및 회분 함량은 각각 4.1-6.3% 및 2.6-6.2% 범위였다. 점도는 정제 후 HMC의 점도와 유사해졌고, 구성당은 glucose만이 정량되었으나 xylose, arabinose 등이 TLC상에 소량 확인되었다. 평균분자량은 $2.0{\times}10^6-5.1{\times}10^6$ 범위에서 약간 감소하였으며. 열분석결과 ${\beta}-glucan$의 피크온도는 약 $130-140^{\circ}C$ 범위에서 정제도에 따라 증가 또는 감소하였으나 엔탈피는 증가하였다. ${\beta}-(1{\rightarrow}3)$에 대한 ${\beta}-(1{\rightarrow}4)$ 결합비는 1:2.20에서 정제 후에는 최대 1:5.50까지 증가였다. 이상의 결과로부터 본 정제조건에 의하여 점도의 변화가 없는 범위에서 ${\beta}-glucan$${\beta}-(1{\rightarrow}3)$ 결합의 분해가 증가하면서 평균 분자량이 감소하는 특성을 가진 80% 이상의 ${\beta}-glucan$분획을 얻을 수 있었다.

Perfluoropolymer Membranes of Tetrafluoroethylene and 2,2,4Trifluofo- 5Trifluorometoxy- 1,3Dioxole.

  • Arcella, V.;Colaianna, P.;Brinati, G.;Gordano, A.;Clarizia, G.;Tocci, E.;Drioli, E.
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
    • /
    • pp.39-42
    • /
    • 1999
  • Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

  • PDF

찰벼 품종에 따른 소곡주의 품질 및 기호도 변이 (Variation in Quality and Preference of Sogokju (Korean Traditional Rice Wine) from Waxy Rice Varieties)

  • 천아름;김대중;윤미라;오세관;홍하철;최임수;우관식;김기종;주성철
    • 한국작물학회지
    • /
    • 제55권2호
    • /
    • pp.177-186
    • /
    • 2010
  • 국내에서 가장 오래된 전통주인 소곡주의 주질 개선을 위해 원료인 찰벼 품종에 따른 품질 특성을 살펴보았다. 국내 찰벼 품종 9품종으로 소곡주를 제조하여 그 품질을 비교한 결과, 백설찰벼가 소곡주 원료로서 가장 우수한 기호도 점수를 받았다. 구체적으로 살펴보면 단백질 함량은 6.9~7.5% 범위로 눈보라와 설향찰벼가 가장 낮았으며 한강찰벼가 가장 높았다. 단백질 함량과 관계된 백미의 경도 역시 설향찰벼가 가장 약하였고 백설찰벼가 가장 단단한 것으로 나타내었다. 찹쌀의 외관 특성은 품종별로 다소 상이하여 일부 육안으로 차이를 판별할 수 있었다. 호화특성은 품종 간에 차이가 뚜렷하였는데 동진찰벼의 낮은 점성은 아밀로펙틴 중 높은 단쇄 비율에 기인한 것으로 판단되었으며, 한강찰벼의 높은 점성은 아밀로펙틴의 낮은 단쇄 비율과 높은 중쇄비율 등에 기인한 것으로 판단되었다. 품종별 소곡주는 알코올 함량은 17.6~19.9%, 당도는 20.5~23.9 brix, pH 4.53~4.60, 총 산도는 4.0~4.8% 분포였으며, 당은 주로 glucose, 유기산은 주로 succinic acid로 이루어 진 것을 확인할 수 있었다. 품종 중 설향찰벼의 경우 알코올 함량이 높아 알코올 수율은 높고 잔류 당은 적은 것으로 나타났다. 품종별 색 특성은 신선찰벼를 제외하고 품종 간 차이가 크지 않았다. 찰벼 품종별로 소곡주의 관능검사를 실시한 결과 백설찰벼 소곡주의 기호도 점수가 가장 높았다. 소곡주 기호도는 포도당 등 당도가 높아 단맛이 강하고 투과율이 높아 맑은색을 갖는 특징과 관련이 높았으며, 발효 정도와 관련된 수율과는 부의 상관을 나타내었다.