• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.103-103
• /
• 2011

비스코스레이온(Viscose Rayon)소재는 목재 펄프를 원료로 한 재생섬유(습식방사)로서 Drape성과 반발성은 탁월하나, 습식방사에 따른 분자구조적 불안정성으로 건 습열처리시 형태불안정(치수변화율이 큼)으로 제직(준비) 및 후공정상 여러 가지 Trouble 유발과 완제품 세탁시 수축발생으로 종종 Dry Creanning 해야 하는 문제점들이 내재되어 있다. 또한 수분흡수시 강도저하, 수축과 구김, 염색 불균염 등의 문제점과 섬유공정상 생활취급상에 많은 애로를 가지고 있으며, 구성고분자가 수소결합에 의해 강고하여 "신축문제", 수분흡수시 팽윤(Swelling)에 의한 형태불안, 즉 "수축문제"가 개선해야 할 고질적 문제로 남아있다. 따라서 본 연구에서는 레이온 소재의 형태안정화 제품을 개발하기 위하여 복합사고공 및 염색가공 기술을 개발하고자한다. 신축 및 복합기술에 의한 Rayon DTY, N/R 신축 및 복합기술에 의한 Rayon DTY, N/R 복합가공사를 개발, 제편직 요소기술과 염가공기술을 연구하므로서 형태안정성 레이온 복합소재 제품을 개발하고자 한다. Rayon 소재의 후공정 용이성과 형태안정성을 부여하기 위하여, 레이온 DTY가공사, Rayon-합섬 장(長)-장(長) 복합사를 개발하여 CoolBiz용 냉감소재 및 스포츠 웨어 소재 등으로 활용하고자 한다. 사가공기술에 의한 신도 16%, 수축률 1.6%인 형태안정 Rayon DTY 소재를 개발하였으며, 선연후가공기술에 의하여 N/R 복합가공사를 개발, 신도 18%, 수축률 1.2%인 차별화 레이온 소재를 개발하였다. 이에 기존 Rayon 후가공 및 염색공정과 상이한 개발된 선연후 가연 Rayon DTY가공사 및 T/R혼방사를 활용한 직물에 대하여 최적 전처리, 염색 후가공 공정의 최적 조건을 알아보았다.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.9
• /
• pp.1547-1554
• /
• 2015

The potential of microalgae biofuel has not been realized because of the low productivity and high costs associated with the current cultivation systems. In this study, a new low-cost and transparent attachment material was tested for cultivation of a filamentous algal strain, Stigeoclonium sp., isolated from wastewater. Initially, the different materials tested for Stigeoclonium cultivation in untreated wastewater were nylon mesh, polyethylene mesh, polypropylene bundle (PB), polycarbonate plate, and viscose rayon. Among the materials tested, PB led to a firm attachment, high biomass (53.22 g/m², dry cell weight), and total lipid yield (5.8 g/m²) with no perceivable change in FAME profile. The Stigeoclonium-dominated biofilm consisted of bacteria and extracellular polysaccharide, which helped in biofilm formation and for effective wastewater treatment (viz., removal efficiency of total nitrogen and total phosphorus corresponded to ~38% and ~90%, respectively). PB also demonstrated high yields under multilayered cultivation in a single reactor treating wastewater. Hence, this system has several advantages over traditional suspended and attached systems, with possibility of increasing areal productivity three times using Stigeoclonium sp. Therefore, multilayered attached growth algal cultivation systems seem to be the future cultivation model for large-scale biodiesel production and wastewater treatment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.1
• /
• pp.14-19
• /
• 2016

The viscosity and mechanical property of HTPB/AP composite solid propellant are profoundly affected by particle size of AP. In HTPB/AP propellant formulated by two mode of AP size such as $190{\mu}m$ and $7{\mu}m$, the propellant was found to be much less viscose at end of mix when coarse/fine AP ratio is ranged from 70/30 to 60/40 due to high solid packing fraction. It was shown that the toughness of tensile strength test for HTPB/AP propellant increased with the increase in coarse AP. Considering both lower viscosity and better tensile strength, the optimum ratio of AP coarse/fine was estimated to be 70/30.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.4
• /
• pp.357-369
• /
• 1989

The purpose of this study was to investigate the effects of treatment temperature and time on the, of easy-care and strength properties of the wet fixation processed rayon fabrics. Viscose rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100 and 100/150(g/1). Magnasium chloride was used as a catalyst. The wet fixation conditions were 24hrs at room temperature,20 mins at $75^{\circ}C$ and 5 mins at $105^{\circ}C$ Wet fixation processed fabrics did not show the difference in the resin add-one, DP ratings and wrinkle recovery angles by the different treatment temperatures and times. DP ratings were in the order of $105^{\circ}C>75^{\circ}C>room$ temp, in one bath and two bath wet fixation. Breaking and tearing strength of one bath processed fabrics showed in the order of $75^{\circ}C>room\;temp>105^{\circ}C$ The breaking strength of two bath processed fabrics showed in the order of $105^{\circ}C>75^{\circ}C>room$ temp. Tearing strength showed in the order of $75^{\circ}c>105^{\circ}C>room$ temp. Abrasion resistances were in the order of $75^{\circ}C>105^{\circ}C>room$ temp. in one bath and two bath processes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.3
• /
• pp.471-482
• /
• 1995

Using the acetate velvet and viscose velvet whose pile lengths were sheared as 1.45, 1.55, 1 65, 1.75, 1.85, 1.90mm under the condition equating the weaving process of ground fabric, the conclusions were as follows through the results of the sensory assessments estimated by women students in our university and the physical properties, H. V and T. H. V obtained by KES-F system. 1. In the sensory assessments estimated by the method of paired comparison and ranking of samples, the longer pile length was, the more the hand values of smoothness, softness, thickness, heaviness increased on the whole. 2. The H V. and T. H. V. measured by KES-F system were as follows; Kohi increased to pile length 1.85mm and then decreased a little at 1.90mm. hummer increased as pile length was longer. Fukurami increased to pile length 1.75mm and then decreased gradually as pile length was longer. Total hand value increased gradually from 1. 45mm to 1.85mm, had the top value at 1.85mm, and then decreased a little at 1.90mm. 3. In the results of summarizing $\ulcorner$the physical properties correlated closely with the H. V obtained by sensory assessments$\lrcorner$ and tithe Physical properties correlated closely with the H. V. and T. H. V obtained by KES-F systems, it showed that all the sensory properties correlated closely with compressive energy, flexural rigidity, thickness, weight and pile ratio in the former and that the physical properties correlated closely with each H V and T. H. V were different in the latter. 4. It showed that factor 1 was related to compressive energy, thickness, weight, pile ratio, factor 2 was related to recovery energy, compressive resilience, compressive index, and factor 3 was related to compressive recovery ratio in the result of factor analysis. 5. In the multiple repression analysis, the expressions of all sensory properties had compressive ratio, frictional coefficient in the regression expressions of $\ulcorner$H. V. obtained by sensory assessments$\lrcorner$, while the expressions of each H. V. and different physical properties in the regression expressions of $\ulcorner$H. V. obtained by KES-F system$\lrcorner$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.3-13
• /
• 1999

This study was performed for purpose of getting fundamental information requisite to wear velvet clothes that is more comfortable for the human body and also the environment. It was carried out in a human wearing test and thermal manikin test at the same time in a controlled-condition chamber. The experimental environment had a ambient temperature of 15$\pm$0.5$^{\circ}C$ with the relative humidity at 5$^{\circ}C$$\pm$5% and with air velocity at less that than 0.2m/sec. Velvet differ from common plain weaves in thermal properties because it's constructed in two parts one is ground part and the other part is pile part. In order to investigate the thermal resistance of velvet eight different combination of 4 velvet kinds and 2 lings kinds as experimental clothes. [(4 velvet kinds : Acetate cuprammoium Rayon Cotton Wool) (2 lining kinds : acetate viscose rayon)longrightarrow8 combination: Aa, Av, Ra, Rv, Ca, Cv, Wa, Wv: the simplified character] The results of this study can be summarized as follows : 1. For the regional thermal resistance the differences in eight clothes as well as differences in each part were significant. As a whole the breast part showed the highest thermal resistance and the leg part was higher than the shank part. The rank of the total thermal resistance was put at Wa>Wv>Ca>Cv>Aa>Av>Ra>Rv in this order. 2. Considered clothing microclimate microclimate temperature has a similar tendency to the total thermal resistance. It showed a significance in the differences of eight clothes and each parts. the belly part was highest in every combination. On the other hand for clothing humidity there was a significance between back and breast part only in the human wearing test. 3. It was indicated that CLO value was highly positively correlated with the clothings' weight and showed a high negative correlation with the air permeability.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.3 s.35
• /
• pp.216-221
• /
• 1990

This study was performed for the development of antimicrobial finished nonwoven fabrics with water repellency. And it was aimed to examine the changes of moisture related properties and air permeability of the finished fabrics. Viscose rayon nonwoven fabrics were treated with organic silicon quaternary ammonium salt having carbon numbers of 16, which was synthesized for this study Antimicrobial activity was evaluated by shake flask method and the reactivity of antimicrobial agent was measured by degree of luminescence from inductively coupled plasma. Water repellency of treated specimen was evaluated by dynamic water absorption measurement and air permeability was measured by Frazier method. The results obtained from this study were as follows: 1. Excellent antimicrobial activity was obtained for the high concentration of treatment and the durability of finishing after laundering was better as the treatment concentration was higher 2. Silicon contents taken up by specimen increased with increased treatment concentration. 3. Dynamic water absortion of treated specimen decreased compared to that of untreated. And, it was lowered as the treatment of concentration increased and as the silicon content increased. 4. Moistuie regain and uptake with lapse of time of treated specimen increased compared to those of untreated. But, air permeability of treated specimen decreased.

• Clean Technology
• /
• v.13 no.3
• /
• pp.201-207
• /
• 2007

Carboxymethylcellulose (CMC), which is water-soluble at room temperature, was synthesized from cellulose in this study. Experimental parameters included reaction temperature, time, concentration of NaOH, and monochloroacetic acid (MCA). In mercerization and etherification, solubility and degree of substitution (DS) increased when NaOH (or MCA) concentration increased and maximum solubility and DS were achieved when NaOH or MCA was 30%. The effect of MCA concentrations on the DS was larger than that of the NaOH concentration. Tensile strength of the CMC was decreased by the increases of reaction time, reagent concentration and reaction temperature. Tensile strength also decreased by NaOH and MCA. However, low decrease of tensile strength was observed in near neutral region.

• Proceedings of the ESK Conference
• /
• 1993.04a
• /
• pp.100-109
• /
• 1993

To investigate the work-relatedness of carpal tunnel syndrome of some workers at packing department in a rayon manufacturing company, reseracher studied the symptoms and physical sign related to carpal tunnel syndrome of the workers at packing, ysrning, and washing department. The results are as follows: 1. By the results of ergonomic study, the packing work had the considerable probability to develop the carpal tunnel syndrome. 2. The prevalences of symptoms, physical sign and case by definition were higher in woman workers than in man workers. 3. In female workers, the age-agjusted prevalence rates of symptoms were 11.6/1, 000 in workers at washing department, 111.6/1, 000 in workers at packing department, and 70.1/1, 000 in workers at yarning department. In male workers, the age- adjusted rates of symptoms were 92.1/1, 000 in workers at washing department, 210.1/1, 000 in workers at packing and delivery department, and 0.0/1, 000 in workers at yarning department. 4. In female workers, the age-adjusted prevalence rates of physical signs were 119.5/1, 000 in workers at washing department, 104.4/1, 000 in workers at packing department, and 84.5 in workers at yarning department. In male workers, the age-adjusted rates of physical signs were 65.7/1, 000 in workers at washing department, 59.0/1, 000 in workers at packing and delivery department, and 176.9/1, 000 in workers at yarning department. 5. In female workers, the age- adjusted prevelence rates of carpal tunnel cases by case definition were 123.1/1, 000 in workers at washing department, 1117.2/1, 000 in workers at packing department, and 60.2/1, 000 in workers at yarning department. In male workers, the age-adjusted of cases were 355.9/1, 000 in workers at packing and delivery department, and 0.0/1, 000 in workers at other two departments. 6. The most of female workdrs at washing departmentn had the work history at packing department. 7. We concluded the carpal tunnel syndrome of female workers at packing department were work related.

• Analytical Science and Technology
• /
• v.13 no.1
• /
• pp.89-95
• /
• 2000

Three grades of activated carbon fibers (ACFs) were prepared from various precursors of plantic, synthetic, and mixed fabrics of viscose rayon and cotton. The ACFs an exhibited type I isotherms on the adsorption of nitrogen or argon. Micropore analysis revealed that the ACFs have uniform micropore size distribution in which their peak diameters were in the range of $5.6{\pm}0.3{\AA}$. The BET surface area of ACFs up to $1600m^2g^{-1}$ was proportional to the adsorption capacity of iodine. The BET values of the ACFs prepared were proportional to the burn-off degree of the products.