• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3435-3441
• /
• 2014

차량의 시트 재질로 사용되는 폴리우레탄 폼의 모델링 및 동특성 예측은 승객의 승차감 향상을 위해 매우 중요하다. 본 연구에서는 폴리우레탄 폼의 정특성 시험을 통해 비선형 강성과 점탄성 특성의 시간변수 파라미터를 구하였다. 다항식과 컨벌루션 적분법을 이용하여 폴리우레탄 폼의 비선형 특성과 점탄성 특성을 수학적으로 모델링하였다. 이와 같은 비선형 진동 모델에 대하여 수치적분 방법을 이용하여 시트 바닥 변위에 대한 진동 응답을 계산하였다. 폴리우레탄 폼의 비선형 특성과 점탄성 특성이 진동계에서 미치는 영향을 단순 1자유도계와 인체모델을 이용하여 분석하였다. 결과적으로 폴리우레탄 폼의 점탄성 특성이 승차감을 위한 설계파라미터로 고려되어야 하는 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1324-1331
• /
• 2003

A bushing is a device used in automotive suspension systems to cushion the force transmitted from the wheel to the frame of the vehicle. A bushing is essentially a hollow cylinder which is bonded to a solid metal shaft at its inner surface and a metal sleeve at its outer surface. The shaft is connected to the suspension and the sleeve is connected to the frame. The cylinder provides the cushion when it deforms due to relative motion between the shaft and sleeve. The relation between the force applied to the shaft or sleeve and its deformation is nonlinear and exhibits features of viscoelasticity. An explicit force-displacement relation has been introduced for multi-body dynamics simulations. The relation is expressed in terms of a force relaxation function and a method of determination by experiments on bushings has been developed. Solutions allow for comparison between the force-displacement behavior by experiments and that predicted by the proposed method. It is shown that the predictions by the proposed force-displacement relation are in very good agreement with the experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.138-139
• /
• 2005

To measure electrical properties and viscoelasticity of semiconducting materials in power cable, we have investigated dielectric properties and modulus of EEA/acetylene black composite showed by changing the content of acetylene black. The permittivity from experimental result was increased, while tan6 was decreased by an increment of the content of acetylene black. The modulus of specimens was increased according to a increment of a acetylene black content. And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to a increment of a acetylene black content.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.1-12
• /
• 2001

This paper describes the application of our recently developed two-phase model for flow-induced crystallization (FIC) to the simulation of fiber spinning and film blowing. 1-D and 2-D simulations of fiber spinning include the combined effects of (FIC), viscoelasticity, filament cooling, air drag, inertia, surface tension and gravity and the process dynamics are modeled from the spinneret to the take-up roll device (below the freeze point). 1-D model fits and predictions are in very good quantitative agreement with high- and low-speed spinline data for both nylon and PET systems. Necking and the associated extensional softening are also predicted. Consistent with experimental observations, the 2-D model also predicts a skin-core structure at low and intermediate spin speeds, with the stress, chain extension and crystallinity being highest at the surface. Film blowing is simulated using a "quasi-cylindrical" approximation for the momentum equations, and simulations include the combined effects of flow-induced crystallization, viscoelasticity, and bubble cooling. The effects of inflation pressure, melt extrusion temperature and take-up ratio on the bubble shape are predicted to be in agreement with experimental observations, and the location of the frost line is predicted naturally as a consequence of flow-induced crystallization. An important feature of our FIC model is the ability to predict stresses at the freeze point in fiber spinning and the frost line in film blowing, both of which are related to the physical and mechanical properties of the final product.l product.

• Tribology and Lubricants
• /
• 제34권1호
• /
• pp.1-8
• /
• 2018

This paper presents the analysis of friction master curves for a sliding elastomer on rough granite. The hysteresis friction is calculated using an analytical model that considers the energy spent during the local deformation of the rubber due to surface asperities. The adhesion friction is also considered for dry friction prediction. The viscoelastic modulus of the rubber compound and the large-strain effective modulus are obtained from dynamic mechanical analysis (DMA). We accurately demonstrate the large strain of rubber that contacts with road substrate using the GW theory. We found that the rubber block deforms approximately to 40% strain. In addition, the viscoelastic master curve considering nonlinearity (at 40% strain) is derived based on the above finding. As viscoelasticity strongly depends on temperature, it can be assumed that the influence of velocity on friction is connected to the viscoelastic shift factors gained from DMA using the time-temperature superposition. In this study, we apply these shift factors to measure friction on dry granite over a velocity range for various temperatures. The measurements are compared to simulated hysteresis and adhesion friction using the Kluppel friction theory. Although friction results in the low-speed band match well with the simulation results, there are differences in the predicted and experimental results as the velocity increases. Thus, additional research is required for a more precise explanation of the viscoelastic material properties for better prediction of rubber friction characteristics.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.423-428
• /
• 2009

용융 폴리우레탄의 비 뉴톤 유동곡선을 Physica cone-plate 레오메타를 사용하여 여러 온도에서 구하였다. 이러한 유동 곡선을 이론적인 비 뉴톤 유동식에 적용하여 유동파라메타를 얻었다. 유동곡선에서 전단 속도를 증가시켰다가 감소시킬 때 hysteresis loop가 나타나며, 틱소트로피 유동 현상을 보인다. 용융 폴리우레탄은 전단 흐름에서는 강한 젤 현상을 보이나, 항복응력 이상에서는 비선형 점탄성 성질을 나타낸다. 전단속도를 감소시킬 때 구조변형이 일어나서 전단응력이 전단 속도 증가시보다 작은 값을 보이게 된다.

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.117-128
• /
• 2005

Printing inks are basically dispersions of solid pigment particles in a vehicle. Pigment flocculation and/or colloidal aggregates created by thixotrope additives form a three- dimensional network in the inks. This structure complicates the flow behaviour of inks. However, if the internal structure is formed under control, the printing process will benefit from it because the ink must satify rheological requirements over a very wide range of shear conditions. The presence of internal structure results in the following prominent non-Newtonian rheological properties: viscoelasticity, yield stress, shear thinning and thixotropy. If the components of printing inks were changed, the rheological characteristics such as viscosity, yield stress, viscoelasticity and tack value were considerably varied. Thus, in this paper, the effects of changing the content of rosin modified phenolic resin on rheological properties of the vehicle will be studied. For that, the rheological properties were found by flow, yield stress, creep and oscillation measurements using Bohlin C-VOR Rotational Rheometer. And Emulsion rheology and its microstructure will be investigated.

• Structural Engineering and Mechanics
• /
• 제40권6호
• /
• pp.783-800
• /
• 2011

This paper addresses the finite strip formulations for the stability analysis of viscoelastic composite plates with variable thickness in the transverse direction, which are subjected to in-plane forces. While the finite strip method is fairly well-known in the buckling analysis, hitherto its direct application to the buckling of viscoelastic composite plates with variable thickness has not been investigated. The equations governing the stiffness and the geometry matrices of the composite plate are solved in the time domain using both the higher-order shear deformation theory and the method of effective moduli. These matrices are then assembled so that the global stiffness and geometry matrices of a moderately thick rectangular plate are formed which lead to an eigenvalue problem that is solved to determine the magnitude of critical buckling load for the viscoelastic plate. The accuracy of the proposed model is verified against the results which have been reported elsewhere whilst a comprehensive parametric study is presented to show the effects of viscoelasticity parameters, boundary conditions as well as combined bending and compression loads on the critical buckling load of thin and moderately thick viscoelastic composite plates.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1429-1437
• /
• 1992

본 연구에서는 이완형 물성방정식을 바탕으로 하며 프와송 비가 일정하다는 가정을 하지 않는다. 또한 점탄성 지배방정식에 변분원리를 적용하고 유도되어진 식 에 유한요소해법을 사용하여 시스템 기본해석을 위한 연립방정식을 유도한다. 이와 함께 점탄성 물성함수의 유도 및 응력계산을 위한 공식화 과정도 설명한다. 제시된 방법론의 타당성 및 정확성을 보이기 위해서 평면응력 및 평면변형 문제의 변위 및 응력을 수치해석하여 이론해와 비교 검토하며, 아울러 시간증분의 변화와 Gauss poi- nts수가 수치정확도에 끼치는 영향을 조사한다.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.378-383
• /
• 2014

This study predicts the of the hysteretic friction of a rubber block sliding on an SMA asphalt road. The friction of filled rubber on a rough surface is primarily determined by two elements:the viscoelasticity of the rubber and the multi-scale perspective asperities of the road. The surface asperities of the substrate exert osillating forces on the rubber surface leading to energy dissipation via the internal friction of the rubber when rubber slides on a hard and rough substrate. This study defines the power spectra at different length scales by using a high-resolution surface profilometer, and uses rubber and road surface samples to conduct friction tests. I consider in detail the case when the substrate surface has a self affine fractal structure. The theory developed by Persson is applied to describe these tests through comparison with the hysteretic friction coefficient relevant to the energy dissipation of the viscoelastic rubber attributable to cyclic deformation. The results showed differences in the absolute values of predicted and measured friction, but with high correlation between these values. Hence, the friction prediction model is an appropriate tool for separating the effects of each factor. Therefore, this model will contribute to clearer understanding of the fundamental principles of rubber friction.