• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.71-75
• /
• 2015

To overcome limitations of conventional diagnosis and planning for orthognathic surgery, surgeons have begun to use 3-dimensional (3D) virtual simulation to plan complex orthognathic surgery. In many literatures, it has shown that better surgical outcome achieved with 3D virtual simulation than that with conventional methods. But, there is still lack of data about accuracy of maxillary segmental surgery with 3D virtual simulation. The purpose of this paper was to report the case of maxillary segmental orthognathic surgery with 3D virtual simulation and to assess the actual surgical outcome. Though the result was clinically acceptable, discrepancy between 3D simulation and actual surgery was not superior compared with conventional method. The accuracy of 3D simulation surgery and intermediate wafer fabrication for maxillary segmental surgery needs to be improved. Advancement in 3D software program and careful surgical technique will make it more precise and reliable method.

• 대한족부족관절학회지
• /
• 제27권3호
• /
• pp.112-116
• /
• 2023

A 74-year-old female patient, who underwent surgery for a left distal tibiofibular fracture 40 years earlier, visited the hospital with an ankle varus deformity due to malunion. The patient complained of discomfort while walking due to the ankle and hindfoot varus deformity but did not complain of ankle pain. Therefore, correction using supramalleolar osteotomy was planned, and through virtual surgical simulation, it was predicted that a correction angle of 24° and an osteotomy gap open of 12 mm would be necessary. An osteotomy guide and an osteotomy gap block were made using three-dimensional (3D) printing to perform the osteotomy and correct the deformity according to the predicted goal. One year after surgery, it was observed that the ankle varus was corrected according to the surgical simulation, and the patient was able to walk comfortably. Thus, for correction of deformity, virtual surgical simulation and a 3D-printed osteotomy guide can be used to predict the target value for correction. This is useful for increasing the accuracy of correction of the deformity.

• Journal of International Society for Simulation Surgery
• /
• 제3권2호
• /
• pp.87-89
• /
• 2016

Le fort 1 osteotomy surgery is one of the most popular surgical methods for the treatment of patients with facial bone deformities. An intermediate wafer splint is used to fix the bone segment to the planned position, but there are many steps that can cause errors. To reduce these errors, we propose a method of using a surgical guide made with virtual surgical simulation.

• Journal of International Society for Simulation Surgery
• /
• 제3권1호
• /
• pp.33-35
• /
• 2016

Fibrous dysplasia(FD) is a disorder in which normal bone is replaced with pathologic tissue. When occurring in craniofacial regions, the zygomaticomaxillary complex is most commonly affected and this pathologic lesion results in facial asymmetry. and By using computer-assisted virtual simulation, precise maxillofacial contouring was achieved for harmonious facial morphology and the surgical procedure was simplified and the surgery brought satisfactory results in terms of both esthetics and functionality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1397-1398
• /
• 2011

• Journal of International Society for Simulation Surgery
• /
• 제1권1호
• /
• pp.23-26
• /
• 2014

The aim of this report is to evaluate accuracy using3D surgical simulationand digitally printedwafer in orthognathic surgery. 22-year-old female was diagnosed with mandibular prognathism and apertognathia based on 3D diagnosis using CT. Digital dentition images were taken by laser scanning from dental cast, and each STL images were integrated into one virtual skull using simulation software. Digitalized intermediate wafer was manufactured using CAD/CAM software and 3D printer, and used to move maxillary segment in real patient. Constructed virtual skull from 1 month postoperative CT scan was superimposedinto simulated virtual model to reveal accuracy. Almost maxillo-mandibular landmarks were placed in simulated position within 1 mm differences except right coronoid process. Thus 3D diagnosis, surgical simulation, and digitalized wafer could be useful method to orthognathic surgery in terms of accuracy.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.196-203
• /
• 2016

In this paper, we propose a virtual surgical planning system specialized to mandible reconstruction surgery. Mandible reconstruction surgery is one of the most difficult surgeries, even for experienced surgeons. Compared to the traditional surgical procedures, virtual surgical planning can reduce the operation time in operating room while expecting better surgical outcome with optimized planning. However, with existing software systems, it requires much time and manual operations in virtual surgical planning. To reduce preparation time and improve accuracy of virtual surgical planning, we have developed optimized functions for virtual surgical simulation of mandible reconstruction with user-friendly interface. We found that the proposed system shortened the preparation time by half compared to the existing system from the experiments. The proposed system supports surgeons to make accurate plan faster and easier. The virtually planned results are used to make surgical cutting guide by 3D printing, and this will enhance surgical performance in operating room.

• Archives of Plastic Surgery
• /
• 제45권5호
• /
• pp.395-402
• /
• 2018

Increased emphasis on competency-based learning modules and widespread departure from traditional models of Halstedian apprenticeship have made surgical simulation an increasingly appealing component of medical education. Surgical simulators are available in numerous modalities, including virtual, synthetic, animal, and non-living models. The ideal surgical simulator would facilitate the acquisition and refinement of surgical skills prior to clinical application, by mimicking the size, color, texture, recoil, and environment of the operating room. Simulation training has proven helpful for advancing specific surgical skills and techniques, aiding in early and late resident learning curves. In this review, the current applications and potential benefits of incorporating simulation-based surgical training into residency curriculum are explored in depth, specifically in the context of plastic surgery. Despite the prevalence of simulation-based training models, there is a paucity of research on integration into resident programs. Current curriculums emphasize the ability to identify anatomical landmarks and procedural steps through virtual simulation. Although transfer of these skills to the operating room is promising, careful attention must be paid to mastery versus memorization. In the authors' opinions, curriculums should involve step-wise employment of diverse models in different stages of training to assess milestones. To date, the simulation of tactile experience that is reminiscent of real-time clinical scenarios remains challenging, and a sophisticated model has yet to be established.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.158-166
• /
• 2009

The application of CT with basis on 3 dimensional-reconstruction is getting more widely practiced. With the data obtained from cone-beam computed tomography(CBCT), not only the diagnosis of the patient with skeletal abnormality but also the virtual simulation of the orthognathic surgery were performed and its application would be popular in orthodontic field. We reported a case, a 19-year old man who was diagnosed mandibular prognathism and required orthognatic surgery. In this case, the virtual orthognathic surgery was simulated and surgical wafer was fabricated by using CBCT data. That wafer was applied the actual orthognathic surgery. After preoperative orthodontic treatment, we prepared surgery as follows. : (l)Acquisition of 3D image data, (2)Reconstruction of 3-dimensional virtual model, (3)Virtual model surgery, (4)Extraction of stere-olithographic image, (5)Check-up for occlusal interference, (6)Fabrication of surgical stent by stereolithography. Bilateral sagittal split ramus osteotomy was operated and used stereolithographic surgical stent. 1 month later, we superimposed CBCT datas of virtual surgery and that of actual surgery, and then compared the result. CT data's application for othognathic surgery yielded satisfactory outcomes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.372-377
• /
• 2007

For more than 2,500 years, surgical teaching has been based on the so called "see one, do one, teach one" paradigm, in which the surgical trainee learns by operating on patients under close supervision of peers and superiors. However, higher demands on the quality of patient care and rising malpractice costs have made it increasingly risky to train on patients. Minimally invasive surgery, in particular, has made it more difficult for an instructor to demonstrate the required manual skills. It has been recognized that, similar to flight simulators for pilots, virtual reality (VR) based surgical simulators promise a safer and more comprehensive way to train manual skills of medical personnel in general and surgeons in particular. One of the major challenges in the development of VR-based surgical trainers is the real-time and realistic simulation of interactions between surgical instruments and biological tissues. It involves multi-disciplinary research areas including soft tissue mechanical behavior, tool-tissue contact mechanics, computer haptics, computer graphics and robotics integrated into VR-based training systems. The research described in this paper addresses the problem of characterizing soft tissue properties for medical virtual environments. A system to measure in vivo mechanical properties of soft tissues was designed, and eleven sets of animal experiments were performed to measure in vivo and in vitro biomechanical properties of porcine intra-abdominal organs. Viscoelastic tissue parameters were then extracted by matching finite element model predictions with the empirical data. Finally, the tissue parameters were combined with geometric organ models segmented from the Visible Human Dataset and integrated into a minimally invasive surgical simulation system consisting of haptic interface devices and a graphic display.