• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.10a
• /
• pp.149-154
• /
• 1998

본 논문에서는 월드와이드웹상에서 3차원 인터페이스를 기술하는 표준 사양인 VRML과 자바의 EAI(External Authoring Interface)를 통하여 사용자 간에 발생하는 상호작용들을 동기화 시키는 방법을 소개한다. 제시한 방법에서는 별도의 독립적인 응용프로그램을 작성하거나 동기화를 위하여 확장된 VRML을 사용할 필요없이 웹브라우저와 바로 호환하여 사용할 수 있으며 기존의 방대한 웹문서와 연계가 쉬우므로 범용적인 자료구축이 가능하다. 하지만, 가장 최근의 VRML97에서조차도 VRML이 제시하는 가상공간 다중 사용자 환경의 지원은 아직 미비하다. 더 이상 단순히 3차원 월드를 탐험하는 시기는 지났으며, 같은 공간상에서 혼자가 아닌 여럿이 함께 하는 다중 사용자 환경을 제공해야 할 것이다. 이에 자바의 네트웍 기능과 가상공간의 외부에서 동적으로 월드를 제어할 수 있는 EAI를 이용하여 부족했던 다중 사용자 환경을 지원함으로써 가상 공간 시스템을 구축할 수 있다. 그러나, 가상 공간에서 일어나는 이벤트는 단지 동일 브라우저에서만 유효하기 때문에 다른 사용자에게 전달할 때는 이벤트를 원격지의 이벤트와 연동하기 위하여 다른 방법이 필요하다. 사용자 상호작용 시스템에 있어서 이러한 이벤트를 결정하는 가장 중요한 요소는 아바타의 행동양식(avatar's behavior)이라 할 수 있다. 가상 공간에서 일어나는 이벤트의 대부분이 사용자에 의해서 발생되는 것들이다. 즉, 아바타의 행위에 따라서 사용자 서로 간에 상호작용이 일어나게 되며 이들 이벤트를 서로 동기화 함으로써 실시간 3차원 상호작용 시스템을 구현한다. 이렇게 구현된 시스템을 구현한다. 이렇게 구현된 시스템은 전자 상거래, 가상 쇼핑몰, 가상 전시화, 또는 3차원 게임이나 가상교육 시스템과 같은 웹기반 응용프로그램에 사용될 수 있다.물을 보존·관리하는 것이 필요하다. 이는 도서관의 기능만으로는 감당하기 어렵기 때문에 대학정보화의 센터로서의 도서관과 공공기록물 전문 담당자로서의 대학아카이브즈가 함께 하여 대학의 공식적인 직무 관련 업무를 원활하게 지원하고, 그럼으로써 양 기관의 위상을 높이는 상승효과를 낼 수 있다.하여는, 인쇄된 일차적 정보자료의 검색방법등을 개선하고, 나아가서는 법령과 판례정보를 위한 효율적인 시스템을 구축하며, 뿐만 아니라 이용자의 요구에 충분히 대처할 수 잇는 도서관으로 변화되는 것이다. 이와 함께 가장 중요한 것은 법과대학과 사법연수원에서 법학 연구방법에 관한 강좌를 개설하여 각종 법률정보원의 활용 내지 도서관 이용방법에 관하여 교육하는 것이다.글을 연구하고, 그 결과에 의존하여서 우리의 실제의 생활에 사용하는 $\boxDr$한국어사전$\boxUl$등을 만드는 과정에서, 어떤 의미에서 실험되었다고 말할 수가 있는 언어과학의 연구의 결과에 의존하여서 수행되는 철학적인 작업이다. 여기에서는 하나의 철학적인 연구의 시작으로 받아들여지는 이 의미분석의 문제를 반성하여 본다. 것이 필요하다고 사료된다.크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.1-10
• /
• 2010

This present paper's goal is to show a virtual human agent's movement-data loci based on realistically limited perception data is human-like. To determine human-likeness of the movement-data loci, we consider interactions between two parameters: Realistically Limited Perception (RLP) data and Incremental Movement-Path data Generation (IMPG). That is to consider how the former (i.e., RLP), one of the simulated parameters of human thought or its elements dictates the latter (i.e., IMPG), one of the simulated parameters of human movement behavior. Mapping DB is a prerequisite for navigation in an agent system because it functions as an interface between perception and movement behavior. Although Hill et al. studied mapping DB methodology based on RLP, their research dealt only with a rendering camera's view point data. The agent system in this present paper was integrated with the Hill's mapping DB module and then the two parameters' interaction was considered on a military reconnaissance mission with unexpected enemy emergence. Movement loci that were generated by the agent and subjects were compared with each other. The agent system in this present research verifies that it can be a functional test bed for producing human-like movement-data loci although the human-likeness of agent is the result of a pilot test, determined by two parameters (RLP and IMPG) and only 30 subjects.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.373-378
• /
• 2007

최근 들어 햅틱 분야는 디지털 콘텐츠를 만질 수 있게 촉감을 제공함으로써 의학, 교육, 군사, 엔터테인먼트, 방송 분야 등에서 널리 연구되고 있다. 그러나 햅틱 분야가 사용자에게 시청각 정보와 더불어 추가적인 촉감을 제공함으로써 보다 실감 있고 자연스러운 상호작용을 제공하는 등 여러 가지 장점을 가진 것에 비해 아직은 일반 사용자들에게 생소한 분야다. 그 이유 중 하나로 촉감 상호작용이 가능한 콘텐츠의 부재를 들 수 있다. 또한 최근에 가상환경(Virtual Environment, VR)에 관심이 증가 되고, 가상환경에 햅틱이라는 기술을 접목시키는 시도가 많이 일어나고 있어서, 촉감 모델링에 대한 욕구 또한 증대 되고 있다. 일반적으로 촉감 모델링은 Material properties를 가지고 있는 그래픽 모델들로 구성이 된다. 그래픽 모델링은 일반적인 모델링툴 (MAYA, 3D MAX, 기타 등)으로 할 수 있다. 하지만 촉감 관련된 촉감 모델들은 콘텐츠를 제작한 이후에 일일이 수작업으로 넣어 주어야 한다. 그래픽 모델링에서는 사용자가 직접 눈으로 확인 하면서 작업을 이루어 지기 때문에 직관적으로 이루어질 수 있다. 이와 비슷하게 촉감 모델링은 직관적인 모델링을 하기 위해서 사용자가 직접 촉감을 느껴 보면서 진행이 되어야 한다. 또한 그래픽 모델링과 촉감 모델링이 동시에 진행이 되지 않기 때문에 촉감 콘텐츠를 만드는데 시간이 많이 걸리게 되고 직관적이지 못하는 단점이 있다. 더 나아가서 이런 촉감 모델링을 포함한 모델링 높은 생산성을 위해서 신속히 이루어져야 한다. 이런 이유들 때문에 촉감 모델링을 위한 새로운 인터페이스가 필요하다. 본 논문에서는 촉감 상호작용이 가능한 촉감 콘텐츠를 직관적으로 생성하고 조작할 수 있게 하는 촉감 모델러를 기술한다. 촉감 모델러에서 사용자는 3 자유도 촉감 장치를 사용하여 3 차원의 콘텐츠 (정적 이거나 동적이거나 Deformation이 가능한 2D, 2.5D, 3D Scene)를 실시간으로 만져보면서 생성, 조작할 수 있는 촉감 사용자 인터페이스 (Haptic User Interface, HUI)를 통해서 콘텐츠의 표면 촉감 특성을 직관적으로 편집할 수 있다. 촉감 사용자인터페이스는 마우스로 조작하는 기존의 2 차원 그래픽 사용자 인터페이스를 포함하여 3 차원으로 사용자 인터페이스도 추가되어 있고 그 형태는 촉감 장치로 조작할 수 있는 버튼, 라디오버튼, 슬라이더, 조이스틱의 구성요소로 이루어져있다. 사용자는 각각의 구성요소를 조작하여 콘텐츠의 표면 촉감 특성 값을 바꾸고 촉감 사용자 인터페이스의 한 부분을 만져 그 촉감을 실시간으로 느껴봄으로써 직관적으로 특성 값을 정할 수 있다. 또한, XML 기반의 파일포맷을 제공함으로써 생성된 콘텐츠를 저장할 수 있고 저장된 콘텐츠를 불러오거나 다른 콘텐츠에 추가할 수 있다. 이러한 시스템은 햅틱이라는 분야를 잘 모르는 사람들도 직관적으로 촉감 모델링을 하는데 큰 도움을 줄 수 있을 것이다.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.529-538
• /
• 2003

The speedy development of the world-wide web is rapidly growing the internet-based tools for the remote instruction. In interchanging and expressing the information of one another on the web, it is produced through the form of HTML(Hyoertext Text Markup Language). However, the structural disadvantage of the HTML is becoming to require a powerful XML(eXtensible Markup Language) which can store all the sphere of data, and transform them into another form. Nevertheless, because the powerful XML(eXtensible Markup Language). However necessary that XML standard should be applied appropriately. Because existing lecture data of cyber education sites cannot be shared, the users should passively use only the functions offered by cyber school. To solve the problem of this limit, in this study, the standardized data structure for XML is defined, and system model for processing between the server and the client is provided. By storing the lecture data of cyber education sites as XML on the web, stored data came to be reused without changing on any site. In the view of Users, they could used the Internet service with equipment that they want at any place and any time. To control any kinds of CK\LMS(Cyber Lecture Management System) for Administrator and Users, we offered a variety of Multimedia applications and an easy interface and built a new style of CLMS. Therefore, by strong and extracting the data related with the virtual education of the secondary school through the form of XML, for the effective interchange and sharing of the information, maximum utilization of the information can be achieved.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.414-420
• /
• 2018

The digital convergence looking for new ways to engage visitors by superimposing virtual content on projection over the real world captured media contents. This paper propose the Light ID based interactive 3D immersive exhibition things view using HMD AR technology. This approach does not required to add any additional infrastructure to be built-in to enable service and uses the installed Lighting or displays devices in the exhibit area. In this approach, the Light ID can be used as a Location Identifier and communication medium to access the content unlike the QR Tag which supports provide the download information through web interface. This utilize the advantages of camera based optical wireless communication (OWC) to receive the media content on smart device to deliver immersive 3D content visualization using AR. The proposed exhibition method is emulated on GALAXY S8 smart phone and the visual performance is evaluated for Jeonju Hanok Village. The experimental results shows that the proposed method can give immersive 3D view for exhibit things in real-time.

• Journal of KIISE:Software and Applications
• /
• v.34 no.10
• /
• pp.900-909
• /
• 2007

This paper describes an experiment on the evaluation of human sensibility by monitoring responses to changes In the frequency and amplitude of a tactile display system. Preliminary tasks were performed to obtain effective adjectives concerning texture perception. The number of collected adjectives was originally 33. This number of adjectives was reduced to 14 by a suitability survey that asked whether an adjective is suitable for expressing a texture feeling. Finally after performing a semantic similarity evaluation, the number of adjectives was further reduced to ten and these ten were used in the main experiment. In the main experiment, selected sandpaper types and 15 selected combinations of frequencies and amplitudes of a tactile display were utilized to quantitatively evaluate the ten adjectives using a bipolar seven-point scale. The data show that a relationship exists between the independent variables(frequency, amplitude, and grit site) and the dependent variable(perceived texture). That is, the change of frequency and amplitude is directly related to perceived roughness or essential elements of human tactile sensitivity found in the preliminary experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1094-1103
• /
• 2012

Recently, software industry regarding national defense increases system development of distributed simulation system of M&S based to overcome limit of resource and expense. It is one of key technologies for offering of mutual validation among objects and reuse of objects which are discussed for developing these systems. RTI, implementation of HLA interface specification as software providing these technologies uses Federation Object Model for exchanging information with joined federates in the federation and each federate has a characteristic that is supposed to have identical FOM in the federation. This technology is a software which is to provide the core technology which was suggested by the United state's military M&S standard framework. Simulator, virtual simulation, and inter-connection between military weapons system S/W which executes on network which is M&S's core base technology, and it is a technology which also can be used for various inter-connection between S/W such as game and on-line phone. These days although RTI is used in military war game or tactical training unit field, there is none in Korea. Also, it is used in mobile-game, distribution game, net management, robot field, and other civilian field, but the number of examples are so small and informalized. Through this developing project, we developed the core technique and RTI software and provided performance of COTS level to improve communication algorithms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5513-5521
• /
• 2015

There is an operational efficiency problem about wayside equipment applied to the domestic low-density branch as the equipment has been installed and operated similarly in the mainline. On-board oriented train control system, which has been developed for train safety and operation efficiency, ensures safe train operation without expensive ground control signal devices. Such system consists of on-board control system, wayside control system, and local control system. In this paper, the details of tests such as suitability test, communication test, and interface test are described by installing the on-board control system and wayside control system in field. Installation tests include checking power, voltage, cable connection, LED status, etc. Field applicability of the developed system is also verified through the dynamic operation tests with diverse scenarios, which are performed on the virtual line similar to the real environment including switch machine and level crossing gate. Dynamic operation tests were conducted for total 7 scenarios, and several tests were repeated for each scenario. The elapsed time for each operation was computed by analyzing main process log, and we could check that each operation was accomplished within several seconds. Furthermore, the developed system was verified through field test with an accredited institute, and testing certificates were issued.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.699-711
• /
• 2003

Home networking and Internet control technologies must satisfy three requirements with a view to being applied to home for raising the qualify of human life. Firstly, the cost of adding home networking ability to the traditional appliance must be minimized. Secondly, the mutual accessibility between home network and Internet must be guaranteed in the various Internet service environment of home. Finally, communication must be possible between the home network and the Internet that use different communications protocols. This paper proposes the ARCS (Appliance Remote Control System) that controls appliances based on LnCP (Living network Control Protocol) via the Internet. LnCP is the most cost-effective network and control protocol for home network. ARCS guarantees the accessibility from the Internet to home network and provides users with the virtual interface designed for controlling appliances using the Internet application program. In addition, this paper proposes AICS (Appliance Internet Control Specification). AICS, is based on LnCP, defines the message structure and control commands for the Internet control communication. ARCS and home gateway are developed to meet AICS.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.102-102
• /
• 2018

Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).