• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.355-356
• /
• 2012

최근에는 패션 분야에서는 컴퓨터 그래픽을 이용하여 의상을 재현하는 디지털 클로딩 기술이 활성화되고 있고, 패션의 흐름을 3D 기술과 접목하려는 연구가 많이 진행되고 있다. 패션산업에서 스마트폰을 이용하여 트렌드 변화를 정확하게 파악하여 감성적인 요인들을 추가시켜야 성공적인 패션산업을 이룰 수 있다. 기존의 3D 피팅 서비스는 아바타나 가상 거울이 설치된 매장이나 인터넷 사이트에서 가능하였다. 본 논문에서는 아이폰을 이용하여 소비자 입장에서 시간적, 체력적 소모가 줄일 수 있는 패션 피팅 서비스 시스템을 제안한다. 본 시스템은 기업측면에서는 마케팅을 쉽게 할 수 있고, 소비자는 제품을 다양하게 선택하여 어울림을 확인하였다.

• 한국지역사회생활과학회지
• /
• 제28권1호
• /
• pp.69-79
• /
• 2017

The purpose of this study was to compare fitting of the upper garment by brassiere cup size and types of bodice block. This study conducted a 3D virtual garment system by applying three types of bodice block (I, II, III) and experimental pattern of the bodice block to 3D avatars of four individuals with the following measurements: under bust circumference of 73.5 cm and bust circumferences of 83.5 cm, 86.0 cm, 88.5 cm, and 91.0cm. The results of the study were as follows. First, for 83.5 cm bust circumference (A Cup), appearance of the three types of bodice block (I, II, III) was appropriate. However, as bust circumference increased in size, shape became inappropriate. The depth and width of the armhole, within 15 cm and 11 cm, respectively, were found to be appropriate. In case of 91.0 cm bust circumference (D Cup), all three bodices (I, II, III) were inappropriate. Second, the results of the draft of the experimental patterns of the bodice block of bust circumference measuring 83.5 cm, 86.0 cm, 88.5 cm, and 91.0 cm in the 3D avatars of the four individuals revealed similarities in the frontal view of the silhouette in the four avatars; in the case of the lateral view of the silhouette, lateral width grew wider as bust circumference of the silhouette became larger, but the shape of armhole showed no changes. The depth of the armhole showed little changes from 15.1 cm to 15.22 cm, and the height of sleeve (armscye depth 13.6 cm within +2 cm) remained similar. The difference in width of the armhole from 11.26 cm to 11.37 cm was rather small. The width of the upper sleeve (8.97 cm) seemed to be appropriate as it remained within the 2-3 cm boundary.

• 복식문화연구
• /
• 제25권4호
• /
• pp.448-457
• /
• 2017

This study aims to analyze the changes in the mechanical properties of interlock fabrics knitted with three types of fibers (i.e., cotton, wool, and polyester) by bonding fusible interlinings with varying deniers (i.e., 10D, 20D, and 30D) for a 3D virtual try-on system. We experimented with four properties and thicknesses of twelve specimens of interlining bonded knitted fabrics including face fabrics and interlinings. The results showed that the tensile property changed values (i.e., LT increased, and WT and RT decreased) according to the denier of interlinings; however, the change was slight. On the other hand, the bending property increased significantly as the denier of the interlining increased on both the wale and the course. Among shearing properties, the value of G increased as the denier of the interlining increased on both the wale and the weft; however, 2HG decreased. Additionally, changes in the compression property varied according to the fibers and the denier of the interlinings. The thickness of the knitted fabrics increased or decreased slightly by bonding the interlining. based on these results, we conclude that the 3D virtual system users need to reflect these numerical changes of interlock fabrics by bonding interlinings when they perform fitting tasks on the screen to accurately express the to accurately express the manufacturing conditions of the real garment.

• 패션비즈니스
• /
• 제25권3호
• /
• pp.36-50
• /
• 2021

In the COVID-19 era, globally, companies in the fashion industry are pursuing new convergence methods through digital technology. Conventional fashion shows have become difficult to run exclusively, instead, the shows are run through a combination of offline and digital arrangements. This paper examines the trends of seven digital fashion show weeks in London, Paris, Milan, New York, Seoul, Shanghai, and Tokyo, and presents strategies applicable in Korea's Seoul Digital Fashion Week. We focused on the digital technology used in the digital fashion weeks fashion brands, and the characteristics of the host cities. The study conducted a literature review and case study through corporate and research report data, and the Fashion Week website. Based on the study results, changes in fashion industry calendars like 'See now, Buy now', seasonless, and unified collections for men and women, expansion of D2C system, the rise of short-form contents, and the expansion to the virtual world space and physical limitations can be cited as changed trends. The study provides insight into the incorporation of the Korean Wave and K-Pop singers, industrial structure change, and the establishment of B2B system in the Seoul digital fashion week. The shift to the digital runway is not only an alternative method to cope with the COVID-19 era but also a new "new normal". Fashion shows are no longer fixed and planned in free spaces. As a venue displaying the creator's personality, digital fashion week is expected advance in the future.

• ETRI Journal
• /
• 제35권6호
• /
• pp.969-979
• /
• 2013

Various simulation applications for hair, clothing, and makeup of a 3D avatar can provide more useful information to users before they select a hairstyle, clothes, or cosmetics. To enhance their reality, the shapes, textures, and colors of the avatars should be similar to those found in the real world. For a more realistic 3D avatar color reproduction, this paper proposes a spectrum-based color reproduction algorithm and color management process with respect to the implementation of the algorithm. First, a makeup color reproduction model is estimated by analyzing the measured spectral reflectance of the skin samples before and after applying the makeup. To implement the model for a makeup simulation system, the color management process controls all color information of the 3D facial avatar during the 3D scanning, modeling, and rendering stages. During 3D scanning with a multi-camera system, spectrum-based camera calibration and characterization are performed to estimate the spectrum data. During the virtual makeup process, the spectrum data of the 3D facial avatar is modified based on the makeup color reproduction model. Finally, during 3D rendering, the estimated spectrum is converted into RGB data through gamut mapping and display characterization.

• 패션비즈니스
• /
• 제3권1호
• /
• pp.81-92
• /
• 1999

The purpose of this thesis is to analyze the present conditions and problems of the Electronic Commerce, specially by the fashion companies that utilize the Internet and to propose using plans of Internet Electronic Commerce as a strategic method of fashion companies that have a information-oriented mind to adapt itself to modern century. On the basis of my analysis, I propose some using plans of Internet Electronic Commerce by the fashion companies as follows. As a means of construction method, it is need for the pertinent companies to have an information-oriented mind and then to construct the low-expense but high-speed communication Infrastructure. As an operation and management method, positive web site advertisements plans, such as promotion, using various mass media, subscribing to the Internet search engines and dissemination of products information, etc., are need for companies to attract the consumers to connect to the web site. Second, to offer more satisfactory experiences, it is need for companies to frame the integrated shopping mall as a strategic alliance in the management of shopping mall. To frame the integrated shopping mall is also effective in solving financial problems of shopping mall management and introducing of security system As a means of technology supplement, security management systems, such as SSL or SET, should be introduced for consumers to pay the price and furnish their personal informations. Second, new technology developments, such as the newest simulation programs using Virtual Reality to solve the problem of products' actual feeling, should be need for consumers to feel as they really put clothes on. If these technological developments are realized, fashionable products will be dealt in the Internet shopping mall as well and the marketability of Internet shopping mall will be expanded.

• 복식문화연구
• /
• 제26권5호
• /
• pp.727-743
• /
• 2018

In this study, we used the 3D simulation program to create bodice patterns for adolescents boy students and analyze the fitting and air gap through 3D simulation. The purpose of this study was to select the bodice pattern method that best suited the body shapes of the adolescents male students. The subjects of this study were the French E pattern, Japanese N pattern, and Korean industrial L and J patterns. The applied size was the sixth Korean human body size survey data of 2010 Korea. The age range of the subjects was 13-18 years. DC Suite Program Ver. 5.1 was used, and SPSS 23.0 program was used for data analysis. As a result of comparing the shapes of the bodice patterns in the 3D simulation program, the E pattern had two waist darts on the front and one shoulder dart and one waist dart on the back, and the J and L patterns only had one dart on the back. The N pattern had no darts on either the front or back. As a result of examining the appearance evaluation of the pattern, air gap, color distribution, and clothing cross-section, the E pattern was evaluated as the closest to the body, and the N pattern was evaluated as the pattern with the largest allowance. The J pattern was evaluated as the best fit for body shape of the male adolescents. However, it is necessary to develop a pattern system by adding extra ease in setting the center front length.

• 한국컴퓨터정보학회논문지
• /
• 제25권6호
• /
• pp.183-191
• /
• 2020

본 연구에서는 커스터마이징 시스템 개발을 위한 신한복 치마 패턴 개발의 기초자료를 얻기 위해 신한복 브랜드의 치마 패턴을 비교 분석하고자 하였다. 신한복 6개 브랜드의 패턴을 분석하여 가상착의를 시킨 후 외관평가와 의복압 및 공극량을 평가하였다. 시판 신한복 브랜드 A, B, C, D, E, F의 허리치마 패턴을 분석한 결과, 같은 디자인의 free 사이즈 치마임에도 불구하고 각기 다른 치수로 제작되는 것으로 나타났다. 허리치마의 패턴은 기존의 한복과 같이 평면적인 패턴으로 구성되었다. 외관평가 결과 앞면, 옆면, 뒷면 모든 평가항목에서 6개 브랜드의 패턴 간에 유의미한 차이가 있는 것으로 평가되었다. 외관평가 모든 항목에서 B 브랜드의 허리치마가 우수한 것으로 평가되었다. 의복압을 알아보기 위해 색분포도와 공극량을 살펴본 결과, 허리에 둘러서 착용하는 허리치마의 특성상 대부분의 부위에서 공극량이 큰 것으로 나타나 의복압이 낮은 것으로 평가되었다. 본 연구에서는 신한복 활성화에 따른 치수 및 패턴 규격화를 위한 기초자료를 제안하며, B브랜드 패턴을 기본으로 한 통일된 패턴개발이 이루어져야 할 것으로 생각된다.

• 한국의상디자인학회지
• /
• 제23권4호
• /
• pp.149-166
• /
• 2021

This study tried to suggest a drafting method to draft tight fit torso patterns suitable for adult males with a sway back somatotype and a bend forward somatotype by setting and distributing the ease through the completion of the somatic surface pattern using the 3D body surface segment method. It was intended to be presented as a drafting method. As for the research method, the suitability of the somatic surface patterns and the tight fit torso patterns were confirmed by the evaluation of virtual wear, and the patterns were modified and supplemented. The research results are as follows. In the first evaluation of the tight fit torso patterns, the average, for 55 evaluation items, was 3.92 points for the sway back somatotype and 3.89 points for the bend forward somatotype. In the second evaluation, the bend forward somatotype was 4.51 points and the sway back somatotype was 4.62 points. The chest circumference ease amount for the bend forward somatotype and the sway back somatotype are 6.5% (6.8 cm) and 7% (6.8 cm) of the chest circumference, respectively, and the distribution of the front and back ease is the same at 4:6 (2.72 cm:4.08 cm). The waist circumference ease amount is 6.5% (5.8cm) and 6.5% (5.6 cm) of the waist circumference dimensions, and the distribution of the front and backease are 5:5 (1.45 cm: 1.45 cm) and 4:6 (2.24 cm: 3.36 cm), respectively. The completed tight fit torso patterns were converted into institutional formulas and presented as a drafting method.