• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.2
• /
• pp.243-249
• /
• 1999

지진력을 받는 건물의 응답을 능동적으로 제어하기 위해서는 건물의 응답을 측정하고, 이것을 바탕으로 제어력을 산정하여야 한다. 제어력의 산정 방법에는 여러 제어 알고리듬이 적용이 될 수 있는데, 2차 성능지수를 이용하는 LQ제어는 해석의 용이함과 제어의 효율성으로 인하여 널리 쓰이고 있다. 그러나, LQ제어에는 실시간으로 계측이 된 건물의 지반과의 상대 변위 및 속도를 필요로 하나 이러한 상태 변수를 계측하기가 매우 어려워 건물의 제어를 위한 적용에 한계가 있다. 따라서, 계측이 용이한 건물의 절대 가속도를 바탕으로 관측이 용이한 건물의 절대 가속도를 바탕으로 관측기를 이용하여 상태 변수를 추정하여 제어력을 산정하는 LQC 제어 알고리듬이 지진력을 받는 건물에 대한 실용적인 알고리듬이 될 수 있다. 본 연구에서는 이러한 LQC 알고리듬의 성능을 검증하기 위하여 능동제어추진기가 설치된 축소 1층 모형에 대한 해석 및 실험을 수행하였으며, 그 결과 LQC 알고리듬의 제어 효율을 확인할 수 있었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.5
• /
• pp.100-110
• /
• 1995

The human subject perception response according to vertical vibration and pitching was analyzed with a five degree of freedom model. The vehicle dynamic system with the delayed colored noise excitation and the passenger perception response was arranged as an integrated viration system and could be analyzed simultaneously for seven different combination of vehicle suspension. ISO2631 and BS6841 was adapted for analyzing the passenger perception reponse. Simulation results shows that passenger feel relatively less discomfort due to pitching compared to vertical vibration and road type was not necessary to be considered as a design parameter in view of comfort analysis.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.57-63
• /
• 2000

On the basis of the concept of strain energy-weighted dissipation, an enhanced model for predicting damping in laminates is presented. In this model, the influence of transverse shear on $90^{\circ}$ laminates has been included with those of in-plane stresses on beam. Also, an experimental damping measurement is conducted with changing the length and the thickness of laminated beam specimen for confirmation of the model prediction. The theoretical predictions in $90^{\circ}$laminates were reasonably compared with experimental data. The transverse shear reveals to have an influence on the damping, behavior in $90^{\circ}$ laminates.

• Journal of the Korean Society of Safety
• /
• v.7 no.2
• /
• pp.30-41
• /
• 1992

Analysis of Dynamic Characterisocs of Rectangular Plate by Finite Element Method. Dynamic characteristics of a rectangular plate with opening in it is studied by finite element method. To investigate these characteristics 12 degrees of freedom membrane finite element in used. The rectangular membrane finite elements are defined by specifying geometry, internal displacement functions and strain-displacement relations. Then, the governing equation for the finite element is derived by energy method. To derive the mass matrix and stiffness matrix of the element, expressions for strain and kineic energy in terms of the node displacement are generated. In constructing the overall structure matrix, the matrix of each elements are superposed and partitioned by applying the given boundary condition to obtain a nonslngular matrix. To find the natural freguencies and viration modes, the eigen values and the corresponding eigen vectors are computed by the computer using well known Jacobi power method. In order to verify the capability of the membrane finite element, a flat rectangular plate is analyzed first, and the result is compared with well known analytical results to show the good agreement. A rectangular plate with opening in It is analyzed with the same finite element. The results are presented in this paper. Unfortunately, the literature study could not provide with some results to compare, but the results reveal that the output of this research is phlslcally reasonable. And the results of this research are useful not only in practice but also for the future experimental research in comparison purpose.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.347-355
• /
• 1999

A feasibility investigation on vibration-based nondestructive evaluation of thermal stress-induced micro-failure in the free edge region of thin composite laminates(1mm thick) has been carried out. The failure occurrence and damage zone, which were predicted by the three-dimensional finite-element thermal stress analysis, were observed using the ultrasonic C-scan and optical microscopy. Analysis of the vibration spectrum measured from the laminate beam specimens by the vibration sweep test exhibited that the obvious decrease in resonancy frequency and some considerable increase in damping factor were associated with the micro-failure formation. The vibration technique utilizing short beam and high resonant frequency was found to be very sensitive to the thermal stress-induced damage in the thin laminates.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.1
• /
• pp.14-24
• /
• 1997

The seasonal variation in lipids, and fatty acid composition of neutral lipid(NL) and phospholipid(PL) contained in the muscles of hibernant fish(loach) were investigated. In the investigation, four groups of wild loaches ere used, those caught May, 1993(before spawning period), August, 1993(after spawning period), November, 1993(just before hibernation) and March, 1994(just after hibernation). The NL was the most abundant in muscle lipid, followed by PL and glycolipid(GL), and also the composition and variation patterns were almost similar between female and male throughout all the periods. NL content began to increase gradually after March and came to the maximum in August(under 90%) ; hereafter got to decrease gradually again and came to the minimum in March of the next year(under 60%). While the variation-pattern of GL and PL was in inverse proportion with that of NL and their content came to the maximum in March of the next year. The NL and PL fractions were mainly consisted of triglyceride and phosphatidyl choline respectively, and both of the contents showed the highest value in August, the lowest in March of the next year. The major fatty acids in NL fraction were 16:0, 16:1, 18:1, 18:2 and 18:3($\omega$3). In particular, the ratio of 16:1 was much higher than that in PL, while those of highly unsaturated fatty acids(HUFAs) such as 20:4($\omega$6), 20:5($\omega$3) and 22:6($\omega$3) were much lower. The ratio of 16:0 in NL was almost constant through the year, however those of 16:1, 18:1, 18:2 and 18:3($\omega$3) showed a tendency to increase after March and were about 2~4% higher in May, compared with that in March, while those of HUFAs were about 2~4% lower. In particular, the ratio of 16:1 in NL continuously decreased after May and markedly decreased in March of the next year, but those of 18:1, 18:2 were almost constant until November. In August, saturates and monoenes were higher levels due to the slight increase of 18:0, 14:1 and 17:1 than in the other periods, while those of HUFAs decreased and the unsaturation(TUFA/TSFA) of NL showed the lowest value in August. On the contrary, saturates and monoenes gradually decreased after November and the most of them including 18:0, 16:1, 18:1 and 18:2 rapidly decreased in March of the next year, while 20:1, 20:4(~6), and 20:5(~3), and 22:6(~3) were in inverse proportion. PL consisted mainly of 16:0, 16:1, 18:1, 18:2, 20:4(~6), and 20:5(~3). Saturates and monoenes-composition showed almost no difference in March and May, while polyene acids ratio showed similar changes with that of NL. In August, the ratio of saturates(16:0, 18:0) were high but that of HUFAs were low, and after November 16:0, 18:0, 18:1, 18:2 and 18:3($\omega$3) began to decrease, while most of HUFAs increased in their composition-ratio until the marking increase of their unsaturation and the big changes of 18:2, 18:3($\omega$3), 20:4($\omega$6), 22:6($\omega$3) in March of the next year.