• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.172-181
• /
• 2010

In this paper, we propose an adaptive block quantization method. The propose method perfrect reconstructs side information without high complexity in the encoder side, as transmitting motion vectors from a decoder to an encoder side. Also, at the encoder side, residual signals between reconstructed side information and original frame are adaptively quantized to minimize parity bits to be transmitted to the decoder. The proposed method can effectively allocate bits based on bit error rate of side information. Also, we can achieved bit-saving by transmission of parity bits based on the error correction ability of the LDPC channel decoder, because we can know bit error rate and positions of error bit in encoder side. Experimental results show that the proposed algorithm achieves bit-saving by around 66% and delay of feedback channel, compared with the convntional algorithm.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.29-37
• /
• 2008

To transmit video bit stream over low bandwidth such as wireless channel, high compression algorithm like H.264 codec is exploited. In transmitting high compressed video bit-stream over low bandwidth, packet loss causes severe degradation in image quality. In this paper, a new algorithm for recovery of missing or erroneous motion vector is proposed. Considering that the missing or erroneous motion vectors in blocks are closely correlated with those of neighboring blocks. Motion vector of neighboring blocks are clustered according to average linkage algorithm clustering and a representative value for each cluster is determined to obtain the candidate motion vector sets. As a result, simulation results show that the proposed method dramatically improves processing time compared to existing H.264/AVC. Also the proposed method is similar to existing H.264/AVC in terms of visual quality.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.71-77
• /
• 2015

Currently, numerous (broadcasting) programs are being provided to viewers, which makes it hard for viewers to select a program to watch. Especially, surfing channels watching the program videos (which is the most general manner of searching a program) became a time consuming task of performing several tens of channel changes (a channel change takes about 0.7 second). In the paper, a data service for guiding programs using the multi-view of program videos is proposed. The data service allows viewers to navigate all program videos without channel changes. To implement the data service, a method for composing and transmitting multi-view videos with the meta data for handling each video of the multi-view has been devised and a Java API has been implemented to clip, resize, and display parts of the multi-view videos.

• The KIPS Transactions:PartB
• /
• v.12B no.7 s.103
• /
• pp.755-760
• /
• 2005

To transmit a video bit stream over low bandwith, such as mobile, channels, encoding algorithms for high bit rate like H.263+ are used. In transmitting video bit-streams, packet losses cause severe degradation in image quality. This paper proposes a new algorithm for the recovery of missing or erroneous motion vectors when H.263+ bit-stream is transmitted. Considering that the missing or erroneous motion vectors are closely related with those of neighboring blocks, this paper proposes a temporal-spatial error concealment algorithm. The proposed approach is that missing or erroneous Motion Vectors(MVs) are recovered by clustering the movements of neighboring blocks by their homogeneity. MVs of neighboring blocks we clustered according to ALA(Average Linkage Algorithm) clustering and a representative value for each cluster is determined to obtain the candidate MV set. By computing the distortion of the candidates, a MV with the minimum distortion is selected. Experimental results show that the proposed algorithm exhibits better performance in subjective and objective evaluation than existing methods.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.3
• /
• pp.285-289
• /
• 2004

Recently, due to the high development of the internet, needs for multimedia streams such as digital audio and video is increasing much more. In case of transmitting multimedia streams using the User Datagram Protocol (UDP), it may cause starvation of TCP traffic on the same transmission path, thus resulting in congestion collapse and enormous delay because UDP does not perform TCP-like congestion control. Because of this problem, diverse researches are being conducted on new transmission schemes and protocols intended to efficiently reduce the transmission delay of real-time multimedia streams and perform congestion control. The TCP-friendly congestion control schemes can be classified into the window-based congestion control, which uses the general congestion window management function, and the rate-based congestion control, which dynamically adjusts transmission rate by using TCP modeling equations and the like. In this paper, we suggest the square-root congestion avoidance algorithm with the hybrid TCP-friendly congestion control scheme which the window-based and rate-based congestion controls are dealt with in a combined way. We apply the proposed algorithm to the existing TEAR. We simulate the performance of the proposed TEAR by using NS, and the result shows that it gives better improvement in the stability needed for providing congestion control than the existing TEAR.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.574-584
• /
• 2007

As the real time multimedia service become more popular, the needs of transmission with low delay and high quality are getting more stronger. Among those video compression technologies, the rate control method dose an important role in getting the effective data transmitting and the high image quality. In this paper, we combined the feature of CBR and VBR coding methods to propose a new bit-rate control method witch allows each frame to generates bits in the defined fluctuation range and applies a scene change detection at a part of frame and also can maintain low-delay and high quality even if the perfect VBR transmission environment is not guaranteed. The experiment result shows the proposed algorithm provides more effective method than TMN8 in real time application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.474-480
• /
• 2020

With the advent of the Fourth Industrial Revolution, many new technologies are being utilized. In particular, video signals are used in various fields. However, when transmitting and receiving video signals, salt and pepper noise and additive white Gaussian noise (AWGN) occur for multiple reasons. Failure to remove such noise when performing image processing can cause problems. Generally, filters such as CWMF, MF, and AMF remove noise. However, these filters perform somewhat poorly in the high-density noise domain and cause smoothing, resulting in slightly lower retention of the edge components. In this paper, we propose an algorithm by effectively eliminating salt and pepper noise using a modified weight filter using standard deviation. In order to prove the noise reduction performance of the proposed algorithm, we compared it with the existing algorithm using PSNR and magnified images.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.205-216
• /
• 2010

In this paper, a method of MPEG-2 Transport Stream (TS) multiplexing for Ultra HDTV (UHDTV) and its design and implementation as a SW tool is described. In practice, UHD video may be divided into several HD videos and each video is encoded in parallel. Therefore, it is necessary to synchronize and multiplex multiple bitstreams encoding each HD video for transmitting and storing UHD video. In this paper, it is assumed that 4 HD videos partitioning a UHD spatially are encoded as H.264/AVC and two 5.0 channel audios are encoded by AC-3. Therefore, 4 H.264/AVC elementary streams (ESs) and 2 AC-3 ESs is mainly considered in the TS multiplexing of UHD. For the carriage of H.264/AVC and AC-3 over MPEG-2 TS, PES packetization and TS multiplexing are designed and implemented based on the extended specification of the MPEG-2 Systems and ATSC (Digital audio compressed standard), respectively. The implemented UHD TS multiplexing tool emulates real time HW operation in the time unit corresponding to the duration of one TS packet transmission in a given TS rate. In particular, in order to satisfy the timing model, the buffers defined in the TS System Target Decoder (T-STD) are monitored and their statuses are considered in the scheduling of TS multiplexing. For UHD multiplexing, two kinds of multiplexing structures, which are UHD re-multiplexing and UHD program multiplexing, are implemented and their strength and weakness are investigated. The developed UHD TS multiplexing tool is tested and verified in terms of the syntax and semantics conformance and functionalities by using a commercial analyzer and real-time presentation tools.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.411-423
• /
• 2004

In Korea, Eureka-147 DAB (Digital Audio Broadcasting) temporarily decided as the standard system for digital audio broadcasting was evolved into DMB (Digital Multimedia Broadcasting) to complement the technical vulnerability in mobile reception of terrestrial DTV. According to introducing video service in T-DMB (Terrestrial DMB), 'Terrestrial DMB Experimental Broadcasting for Video Service', a national project of the MIC (Ministry of Information and Communication), was done for verifying the possibility of video service via T-DMB. The main objective of the project is computing the effective field strength and coverage for making a plan to build T-DMB broadcasting network and developing transmitting and receiving equipment. In case of digital broadcasting, it is absolutely essential to measure BER (Bit Error Rate) and electric field strength in order to evaluate coverage and quality of received signal. In this paper, we implement an integrated mobile measurement system for T-DMB. For this purpose, we propose efficient data structure and algorithm for BER measurement. By adding GPS (Global Positioning System) and electric field strength measurement parts into BER measurement part, we complete the integrated mobile measurement system, and then verify it by experiments and field tests. The developed system was used in a national project, 'Terrestrial DMB Experimental Broadcasting for Video Service' and measurement results will be used as fundamental data for building T-DMB broadcasting network.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.783-792
• /
• 2016

This paper is Intersection image recording system for transmitting to the central center after integrating the intersection image and signal split image into one image information. The system was configured to collect the intersection image and the signal split image and transmitted to the central center after integrating images into one image and recorded. The system is expected to be effective in preventing a secondary accident by immediately propagate the accident information and reduce the time it takes to dispute and determine the cause of the accident.