• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1117-1121
• /
• 2011

전차에 전기를 공급하는 장치인 가동 브래킷 구조물은 전차가 통과할 때 반복적인 하중을 받는다. 이러한 반복하중은 가동 브래킷 구조물을 구성하는 나사들을 풀리게 하는 가진원이 되고 있다. 본 논문에서는 전산 시뮬레이션을 이용하여 반복적인 진동에 의한 볼트 풀림에 대한 원인과 대책에 대하여 연구하였다. 그 결과 전산 시뮬레이션 모델이 구축되어 가동브래킷 구조물의 동적응답 해석이 가능하게 되었다. 가동 브래킷 구조물의 볼트 풀림에 대한 주된 가진 주파수 영역이 200 Hz 미만임을 확인하였으며, H 빔의 강성을 증가함으로써 볼트풀림을 방지할 수 있음을 알 수 있었다. 아울러 볼트 풀림 원인이 되는 300, 600Hz 대역에서 발생하는 하부밴드 브라킷의 진동 모드를 확인 하였으며, 강성을 올리는 것은 200Hz 이상에서의 볼트 풀림을 방지할 수 있는 효과를 나타냄을 확인하였다.

• 대한기계학회논문집B
• /
• 제39권2호
• /
• pp.199-206
• /
• 2015

본 연구에서는 인공신경망을 이용하여 배관이나 배관요소의 작동상태를 예측할 수 있는 진단방법을 제안한다. 입자영상유속계 기술을 이용하여 얻어진 배관의 검사부위의 진동에 의한 이동량을 인공신경망의 학습용으로 사용한다. 측정시스템은 카메라, 조명, 인공신경망이 탑재된 호스트컴퓨터로 구성된다. 구축된 모니터링시스템이 제대로 작동하는지 이미 알고 있는 진동원(2개의 휴대폰)에 대하여 적용하였다. 진동가속도의 최소값, 최대값, 평균값을 인공신경망의 학습에 사용해 본 결과, 평균값이 진동상태의 실시간 모니터링에 적합함을 확인하였다. 구축된 진단시스템은 실제 가스배관의 작동상태에 대하여 모니터링 가능함이 확인되었다.

• 한국소음진동공학회논문집
• /
• 제25권3호
• /
• pp.184-190
• /
• 2015

NVH engineering has become a hot issue due to radical technology changes and development in automotive industry since customers' expectations and needs for their vehicle is taken to a higher level. However, the source identification and quantification of the road noise within a vehicle is still not at the level where it needs to be to meet their expectations due to its' complex transfer path and difficulties in path optimization. The primary focus of this research is on direct force obtaining method at suspension hard points using suspension test rig. Directly obtained forces at suspension to body mounting points are critical and crucial for determining the effects of design changes of the suspension has on road noise performance. Direct force obtaining method has its limitation in sensor installation within an actual vehicle therefore, many has been indirectly calculating forces using full matrix inversion method or dynamic stiffness method. In this study, to circumvent this limitation, a suspension rig is used. Then, the suspension rig is verified through a comparative analysis of its dynamic behavior between the actual vehicle by cleat test on chassis dynamometer.

• 한국소음진동공학회논문집
• /
• 제25권3호
• /
• pp.150-159
• /
• 2015

An experimental study on frequency characteristics of the microphone array covered with Kevlar sheet was conducted in the closed test section. Microphones that were flush-mounted in the wall of wind tunnel were subjected to very high flow noise resulting from the turbulence in the wall boundary layer. This noise interference by the boundary layer was referred as 'a microphone self-noise' and various approaches were studied to reduce this interference. Recessed microphone array with high tensioned cover was one of the good approaches to reduce this self-noise. But, the array cover could cause an unexpected interference to the measuring results. In this paper the frequency characteristics of the microphone array with Kevlar cover was experimentally studied. The white noise was used as a reference noise source. Three kinds of tensions for the Kevlar cover were tested and those results were compared with the test results without the Kevlar cover. The gap effect between the cover and microphone head was also tested to find out the proper position of microphone in the array module. Test results show that the mid-tension and 10mm gap was the best choice in the tested cases.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.339-347
• /
• 2014

Floor impact sound in high-rise apartment building became one of social problems. A lot of civil complaints on floor impact sound occur continuously and the number of disputes between neighbors in small and aged apartment buildings is increasing. Interests on heavy-weight impact sound pressure level measurement and evaluation method is increased. Previous study reported that heavy-weight impact sound level was changed by the sound field condition of receiving reverberation chamber. In this study, heavy-weight impact sound pressure level change by the receiving sound field condition was measured in standard test facility and mock-up test room. These two experimental conditions were designed to simulate averaged living room of common apartment units. By the change of sound absorption power in receiving room, heavy-weight impact sound pressure level in most of frequency bands were changed in standard test facility and mock-up room. Normalized maximum sound pressure level regulated in ISO 16032 showed wider range of heavy/soft impact sound pressure level. Heavy/soft impact sound pressure level change was became smaller by the application of standardized maximum sound pressure level and ISO/CD 10140-3 Amd 2 method. In the case of standardized maximum sound pressure level, absolute sound pressure level changed. From these results, receiving sound field correction method regulated in ISO/CD 10140-3 Amd 2 is needed for the precision measurement and evaluation of heavy-weight impact sound.

• 한국소음진동공학회논문집
• /
• 제27권2호
• /
• pp.182-188
• /
• 2017

In this work, a new type speaker which features various resonant frequencies is proposed utilizing a magneto-rheological (MR) fluid and its performance is evaluated in terms of the change of the field-dependent sound pressure level. In order to achieve this goal, a whole concept of the speaker system is firstly discussed and subsequently a controllable diaphragm is made using MR fluid whose rheological properties such as viscosity are controllable by the magnitude of magnetic field. Then, the proposed speaker system consisting of the inner structure and the squeeze mode type of MR diaphragm is established in an anechoic room The effectiveness of the proposed speaker system is experimentally evaluated at two different conditions; with and without the magnetic field. It is shown from experimental tests that the sound pressure level at different sound source can be controlled which is not able to achieve using one conventional speaker system.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.476-484
• /
• 2010

최근, 압전 변압기 기술의 급속한 발전으로 권선형 변압기를 대체할 수 있는 다양한 분야에 응용되고 있다. 압전 변압기는 자계의 잡음이 없고, 크기가 소형화되며 고효율과 고전력 밀도, 누설자속이 없어 노이즈 발생이 없고, 공진주파수만을 이용하므로 출력파형이 정현파에 가까워 고조파 잡음이 없는 등 권선형 변압기에 비해서 여러 가지 장점을 갖고 있다. 본 연구는 87.2[KHz]정도의 스위칭 모드에서 두께진동 모드 적층형 압전 변압기를 이용하여 전기적인 등가회로를 적용하여 DC-DC컨버터를 동작 하였다. 또한 DC-DC컨버터를 제안된 회로에 의해서 구동 고휘도 LED 구동 전원장치로써의 가능성을 제시 하였다.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.805-815
• /
• 2008

Transfer path analysis(TPA) and panel contribution analysis(PCA) have been used widely to reduce interior noise of mechanical systems. TPA enables us to decompose interior noise into air-borne and structure-borne noises and estimate the path contribution of noise sources. PCA is also used to identify the noise contribution of each sub-panel in vibro-acoustic systems. In this paper, TPA and PCA are applied to wheel loader, one of the heavy construction equipments. Firstly, TPA for air-borne noise is conducted to estimate the contribution of air-borne sources using pressure transfer function. Thereafter, TPA for structure -borne noise is employed to verify the results of air-borne source quantification through the synthesis of two results. Secondly, PCA is performed by both TPA using pressure transfer function between panels inside the cabin and boundry element method(BEM) for the cabin of wheel loader with various boundary conditions. As a results, it was found that TPA conducted by experiments and PCA accomplished by both experiments and BEM are very effective methods in analyzing the path and contribution of the noises for reducing an interior noise level in the wheel loader system.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.197-204
• /
• 2018

In the present study, unsteady flow analysis has been conducted to investigate the blade forces and wake flow around a hybrid street-lamp having a vertical-axis small wind turbine and a photovoltaic panel. Uniform velocities of 3, 5 and 7 m/s are applied as inlet boundary condition. Relatively large vortex shedding is formed at the wake region of the photovoltaic panel, which affects the increase of blade torque and wake flow downstream of the wind turbine. It is found that blade force has a good relation to the variation of the angle of attack with the rotation of turbine blades. Variations in the torque on the turbine blade over time create a cyclic fluctuation, which can be a source of turbine vibration and noise. Unsteady fluctuation of blade forces is also analyzed to understand the nature of the vibration of a small wind turbine over time. The detailed flow field inside the turbine blades is analyzed and discussed.

• 한국소음진동공학회논문집
• /
• 제15권7호
• /
• pp.788-798
• /
• 2005

The monopole theory has long been used to model air-pumped effect from the elastic cavities in car tire. This approach models the change of an air as a Piston moving backward and forward on a spring and equates local air movements exactly with the volume changes of the system. Thus, the monopole theory has a restricted domain of applicability due to the usual assumption of a small amplitude acoustic wave equation and acoustic monopole theory This paper describes an approach to predict the air-pumping noise of a car tyre with CFD/Kirchhoff integral method. The tyre groove is simply modeled as piston-cavity-sliding door geometry and with the aid of CFD technique flow properties in the groove of rolling car tyre are acquired.'rhese unsteady flow data are used as a air-pumping source in the next CFD calculation of full tyre-road geometry. Acoustic far field is predicted from Kirchhoff integral method by using unsteady flow data in space and time which is provided by the CFD calculation of full tyre-road domain. This approach can cover the non-linearity of acoustic monopole theory with the aid of Non-linear governing equation in CFD calculation. The method proposed in this paper is applied to the prediction of air-pumping noise of simply modeled car tyre and through the predicted results, the influence of nonlinear effect on air-pumping noise propagation is investigated.