• 제목/요약/키워드: Vibration Dose Value

검색결과 17건 처리시간 0.026초

다양한 크기와 주파수 그리고 감쇠를 갖는 상하방향 전신 충격진동에 대한 불편함 연구 (Study on Discomfort of Vertical Whole-body Shock Vibration Having Various Magnitudes, Frequencies and Damping)

  • 안세진;;유완석;정의봉
    • 한국자동차공학회논문집
    • /
    • 제15권2호
    • /
    • pp.50-57
    • /
    • 2007
  • Shocks are excited by impulsive forces and cause discomfort in vehicles. Current standards define means of evaluating shocks and predicting their discomfort, but the methods are based on research with a restricted range of shocks. This experimental study was designed to investigate the discomfort of seated subjects exposed to a wide range of vertical shocks. Shocks were produced from the responses of one degree-of-freedom models, with 16 natural frequencies (from 0.5 to 16 Hz) and four damping ratios (0.05 0.1, 0.2 and 0.4), to a hanning-windowed half-sine force inputs. Each type of shock was presented at five vibration dose values in the range $0.35\;ms^{-1.75}$ to $2.89\;ms^{-1.75}$. Fifteen subjects used magnitude estimation method to judge the discomfort of all shocks. The exponent in Stevens' power law, indicating the rate of growth in discomfort with shock magnitude, decreased with increasing fundamental frequency of the shocks. At all magnitudes, the equivalent comfort contours showed greatest sensitivity to shocks having fundamental frequencies in the range 4 to 12.5 Hz. At low magnitudes the variations in discomfort with the shock fundamental frequency were similar to the frequency weighting $W_b$ in BS 6841, but low frequency high magnitudes shocks produced greater discomfort than predicted by this weighting. At some frequencies, for the same unweighted vibration dose value, there were small but significant differences in discomfort caused by shocks having different damping ratios. The rate of increase in discomfort with increasing shock magnitude depends on the fundamental frequency of the shock. In consequence, the frequency-dependence of discomfort produced by vertical shocks depends on shock magnitude. For shocks of low and moderate discomfort, the current methods seem reasonable, but the response to higher magnitude shocks needs further investigation.

제어 가능한 댐퍼를 적용한 시트 현가장치의 승차감 평가 (Ride Quality Evaluation of Seat Suspension Adopting Controllable Damper)

  • 한영민;민철기
    • 한국소음진동공학회논문집
    • /
    • 제21권12호
    • /
    • pp.1199-1205
    • /
    • 2011
  • In the present work, a seat suspension system adopting semi-active damper is evaluated for driver's ride quality. A cylindrical type of ER(electrorheological) damper is designed and manufactured for the seat suspension of heavy vehicles. The governing equation is derived under consideration of human vibration. A sliding mode controller is then synthesized and experimentally realized on the manufactured ER seat suspension while a driver is sitting on the controlled seat. Ride quality is evaluated by fatigue decreased proficiency boundary, vibration dose value and crest factor utilizing weighted-acceleration according to ISO2631.

THI를 이용한 항공기소음이 주민 건강상태에 미치는 영향 (Questionnaire study conducted around Gimpo International Airport by using THI)

  • 손진희;이건;장서일
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.436-441
    • /
    • 2007
  • This study was carried out to evaluate health effects of aircraft noise using THI(Todai Health Index). The questionnaire survey was conducted around the Gimpo International Airport in Seoul, Korea from 8 August to 9 September. Study subjects, 614 residents, were divided into three groups following to the aircraft noise level: under 75WECPNL(area(1)), $75{\sim}80$WECPNL(area(2)) and $80{\sim}85$WECPNL(area (3)). Twelve scale scores are converted to dichotomous variables based on scale scores of 90 percentile value or 10 percentile value in the control group. Logistic regression analysis taking twelve scores converted as the dependent variables and WECPNL(area), age, gender as the independent variables is conducted. Significant dose-response relationships are found in the scale of MOUT, DEPR, NERV, LIFE, where p denotes significance probability of trend test. Factor analysis was carried out and 2 factors are extracted which may be called "somatic factor" and "mental factor". The dose-response relationship with these factors and noise exposure is not clear. But strangely the odds ratio of mental factor in area 2 is the highest and the annoyance of this area is also higher than other areas.

  • PDF

Ride Comfort Analysis of a Vehicle Based on Continuous Wavelet Transform

  • Lee, Sang-Kwon;Son, Choong-Yul
    • Journal of Mechanical Science and Technology
    • /
    • 제15권5호
    • /
    • pp.535-543
    • /
    • 2001
  • This paper presents the ride comfort analysis of a vehicle based on wavelet transform. Traditionally, the objective evaluation of impact harshness is based on the vibration dose value (VDV) and frequency weighting method. These methods do not consider the damping effect of the suspension system of a vehicle. In this paper, the damping is estimated using wavelet transform based on Morlet mother wavelet and its effect is considered for the subjective evaluation of impact harshness of a car.

  • PDF

THI를 이용한 항공기 소음이 주민 건강상태에 미치는 영향 연구 - 김포공항과 오키나와 Futenma 공항 주변 주민들에 대한 비교 - (Questionnaire Study Conducted Around Gimpo International Airport by Using THI - Comparison with the Responses of the Residents at Gimpo and Futenma, Okinawa -)

  • 손진희;이건;이승욱;장서일
    • 한국소음진동공학회논문집
    • /
    • 제18권6호
    • /
    • pp.624-631
    • /
    • 2008
  • This study evaluates the impact of aircraft noise on people's health using the Todai health index(THI). A questionnaire survey was conducted in the vicinity of Gimpo International Airport in Seoul, South Korea, from August 8th to September 9th, 2005. The survey area was divided into three groups based on different aircraft noise levels : area (1) for $80{\sim}85$ WECPNL, area (2) for $75{\sim}80$ WECPNL and area (3) for less than 75 WECPNL. In each area, approximately 200 respondents were sampled. Twelve scale scores of THI are converted to dichotomous variables based on scale scores of 90 percentile value or 10 percentile value in the control group. Logistic regression analysis taking twelve scores converted as the dependent variables and WECPNL(area), age, gender as the independent variables is conducted. Significant dose-response relationships are found in the scale of MOUT, DEPR, NERV, LIFE. Factor analysis was carried out and 2 factors are extracted. Those two factors might be called the "somatic factor" and the "mental factor". The dose-response relationship between two factors and noise seems to be unclear. Unexpectedly the odds ratio of the menatl factor in area (2), where the noise exposure level is lower than that of the area (1), is the highest and the annoyance in this area is also higher than area (1).

모노스키 유압 완충장치 특성에 따른 탑승 안락감 평가 (Comfort Analysis of Mono-ski with Hydraulic Absorber)

  • 조현석;박진국;김규석;문무성;김창부
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제3권2호
    • /
    • pp.131-140
    • /
    • 2015
  • 하반신 마비환자가 스키를 탈 수 있도록 고안된 모노스키는 스키 플레이트 위에 좌석이 설치된 형태의 썰매이다. 스키를 탈 때 설면으로부터 전달되는 충격은 정상인의 경우 다리관절의 거동에 의하여 흡수되지만 모노스키의 경우에는 좌석에 탑승한 인체에 그대로 전달된다. 상용화된 대부분의 모노스키에는 이를 보완하기 위하여 스키 마운트와 시트 간에 링크 메커니즘과 충격완충장치가 설치되어 있다. 본 연구에서는 유압 실린더가 장착된 모노스키의 주행 시뮬레이션을 수행하고 불규칙한 표면 주행 중 발생하는 진동 충격 가속도를 분석하여 탑승자의 안락감을 평가할 수 있는 모델을 개발하였다. 안락감 평가방법은 국제 규격인 BS6841 을 사용하였다. 개발 모델을 이용하여 유압 완충장치의 노즐조절에 따른 안락감을 평가하였다.

휠로더 자동변속기의 변속품질 평가 방법에 관한 연구 (A Study on the Quantitative Assessment Method for Shift Quality of Automatic Transmission in a Wheel Loader)

  • 이종찬;김관수;임종형;이효원;권영민;김형준;이민희
    • 대한기계학회논문집A
    • /
    • 제32권7호
    • /
    • pp.561-568
    • /
    • 2008
  • The quality of the automatic transmission shift for a wheel loader has been generally evaluated by driver's perception. However the subjective evaluation of the drivers is not always directly related to the shift quality. It is necessary to set up the method for an objective assessment of the shift quality. In this paper, a quantitative assessment method has been developed for the shift quality of the automatic transmission in a wheel loader. The indices for the evaluation were selected through the various tests like the acceleration and the turbine rpm as well as the subjective evaluation of the driver, and were validated by the correlation between subjective and objective assessments using a psychophysical power law. Based on this method, the shift quality of a wheel loader has been evaluated quantitatively under various shift conditions.