• 한국강구조학회 논문집
• /
• 제29권6호
• /
• pp.487-495
• /
• 2017

최근 교통정체와 환경적 문제로 인하여 많은 개발도상국에서 고속철도 시스템이 많이 건설되고 있다. 철도교는 도로교와 비교하여 차이점이 많이 있으며 그중 주행안전성 및 승차감이 중요한 이슈 중의 하나이다. 반복되는 하중으로 인한 구조물의 처짐과 가속도는 열차주행시의 안전성과 사용자의 승차감에 큰 영향을 미친다. 특히 강철도교는 콘크리트교에 비하여 상대적으로 가벼운 중량으로 진동에 취약한 특징이 있다. 이 논문의 목적은 주행 중인 열차에 의한 강박스거더 철도교의 동적 거동을 분석하고 진동을 저감할 수 있는 합리적인 방안을 제안하는 것이다. 세 개의 강철도교에 대한 장기적 계측이 수행되었으며 주행중인 열차에 의한 교량의 동적거동을 해석할 수 있는 수치적인 모델이 개발되었다. 모델의 검증을 위하여 교량의 고유진동수가 비교되었다. 구조물의 진동 저감을 위한 방안으로 세 가지 방법에 대한 매개변수 연구가 수행되었으며, 이 분석 결과를 바탕으로 합리적인 진동 저감 방안이 제안되었다.

• Journal of Biosystems Engineering
• /
• 제29권6호
• /
• pp.501-507
• /
• 2004

Fruits we subjected to complex dynamic stresses in the transportation environment. During a long journey from the production area to markets, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serious fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonant frequency. The determination of the resonant frequencies of the fruit may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. The vibration characteristics of the pears in corrugated fiberboard container in transit were analyzed using FEM (finite element method) modeling, and the FEM modeling approach was first validated by comparing the results obtained from simulation and experiment for the pear in the frequency range 3 to 150 Hz and acceleration level of 0.25 G-rms and it was found that between simulated and measured frequencies of the pears have a relatively good agreement. It was observed that the fruit and vegetables in corrugated fiberboard container could be analyzed by finite element method. As the elastic modulus of the cushion materials of corrugated fiberboard pad and tray cup decreased, the first frequencies of upper and lower pears increased and the peak acceleration decreased.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.1-10
• /
• 2017

The operation of subway trains induces secondary structure-borne vibrations in the nearby underground spaces. The vibration, along with the associated noise, can cause annoyance and adverse physical, physiological, and psychological effects on humans in dense urban environments. Traditional tethered instruments restrict the rapid measurement and assessment on such vibration effect. This paper presents a novel approach for Wireless Smart Sensor (WSS)-based autonomous evaluation system for the subway train-induced vibrations. The system was implemented on a MEMSIC's Imote2 platform, using a SHM-H high-sensitivity accelerometer board stacked on top. A new embedded application VibrationLevelCalculation, which determines the International Organization for Standardization defined weighted acceleration level, was added into the Illinois Structural Health Monitoring Project Service Toolsuite. The system was verified in a large underground space, where a nearby subway station is a good source of ground excitation caused by the running subway trains. Using an on-board processor, each sensor calculated the distribution of vibration levels within the testing zone, and sent the distribution of vibration level by radio to display it on the central server. Also, the raw time-histories and frequency spectrum were retrieved from the WSS leaf nodes. Subsequently, spectral vibration levels in the one-third octave band, characterizing the vibrating influence of different frequency components on human bodies, was also calculated from each sensor node. Experimental validation demonstrates that the proposed system is efficient for autonomously evaluating the subway train-induced ambient vibration of underground spaces, and the system holds the potential of greatly reducing the laboring of dynamic field testing.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.5-13
• /
• 2017

Noise complaints among neighbors in apartment building are mainly caused by floor impact noise that is structure born noise due to occupant induced floor vibration. To control this noise problems many researchers have investigated floor systems and finishing materials. Light-weight impact noise affects by finishing materials, but heavy-weight impact noise induced by heel impacts during normal walking or jumping of children is concerned with structural system and floor vibration. To figure out the characteristics of floor impact noise and transmission of floor vibration due to human activities, vibration tests were conducted in apartment buildings. Impact hammer, heel drop and walking activities were loaded at center of upstairs living room, and accelerations of slabs for both upstairs and downstairs and sound pressure levels for downstairs were measured. The acceleration ratio of transmitted floor vibration to downstairs and human induced vibration in upstairs was between 0.5 and 1.0 according to slab size, wall, and load type. And floor impact noise occurred in the range of natural frequency of slab.

• 대한인간공학회지
• /
• 제32권4호
• /
• pp.389-396
• /
• 2013

Objective: The ride qualities of the six passenger cars were evaluated in 4 subjects on the highway and uneven road. The relation between vibration with driving velocity and driving posture were also investigated separately. Background: Ride comfort plays an important role in the vehicle design. Vibration is the one of the principal components associated with ride comfort. Method: The acceleration of the foot, hip and back were measured using B&K accelerometers in this study. The velocity of the passenger cars was maintained at a constant speed of 80km/h on the highway and 40km/h on the uneven road. For evaluating the effects of driving velocity and driving posture on vehicle's vibration level, separate experiments were performed on the highway with 5 different vehicle speeds and 5 different backrest angles, respectively. Results: The overall ride value of the luxury car showed the best result while the smaller car showed the worst value on the highway. On the uneven road the overall ride value level was increased 75~98%. All the vehicles had the SEAT value less than 1. Faster the velocity lowers the SEAT value. The ride quality in terms of vibration gets worst when the backrest angle increased. Conclusion: The smaller car had a first mode at the higher frequency and showed higher vibration level. SEAT value was mostly affected by the seat property not by vehicle. We ranked the luxury car seat had a best vibration reduction quality than others based on SEAT values. When the driving velocity increased, the overall ride values were increased proportionally and the SEAT values were somewhat decreased. Application: Evaluation of whole-body vibration in the passenger car.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.92-95
• /
• 2005

In this study, Heavy-weight floor impact sound and vibration in concrete structures with different slab thickness have been measured in a test building. It was found that natural frequency increased according to increases of slab thickness, and acceleration level decreases. Results also show that the measurements in the 210 and 240mm slab structures are complied with the result from finite element analysis but the In and 180mm slab structures are not because the structures are constrained to the ground. Therefore, in modelling process the condition of sub-structures should be examined in relation to the boundary conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.504-507
• /
• 2005

This paper presents a self-levelling system for a mass, which undergoes a severe acceleration, with integrated displacement feedback control. After a general description of such a system, theoretical analysis is investigated to design an active control device. That is, the self levelling system is used to reduce the 'static' deflections while isolating the 'dynamic' vibration. A computer simulation model of 45 kg with two air spring mounts is considered to predict the performance of the control system. The results showed the controller can reduce the mass's displacement to the level of 1/3-1/5. Thus the self-levelling system can be applied usefully to reduce the dispalcement of a mass which experiences a high g dynamics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1383-1386
• /
• 2006

This study examines the difference of airborne sound isolation between laboratory and field test. The airborne sound isolation between adjacent dwellings in multi-family buildings is often much less than would be expected from the rated sound reduction index of the nominally-separating wall, due to structure-borne transmission of vibration at the junctions of wall. A variety of construction modifications to control such transmission have also been evaluated. This study presents a factor of the difference for flanking involving joint of wall, and shows the effect of some practical modifications that control the key flanking paths

• 천문학회보
• /
• 제44권2호
• /
• pp.47.1-47.1
• /
• 2019

We report the design and vibration analysis for the optomechanical structures of Linear Astigmatism Free - Three Mirror System (LAF-TMS). LAF-TMS is the linear astigmatism free off-axis wide-field telescope with D = 150 mm, F/3.3, and FOV = 5.51° × 4.13°. The whole structure consists of four optomechanical modules. It can accurately mount mirrors and also can survive from vibration environments. The Mass Acceleration Curve (MAC) is adapted to the quasi-static analysis. Modal, harmonic, and random vibration analysis have been performed under the qualification level of the launch system. We evaluate the final results in terms of von Mises stress and Margin of Safety (MoS).

• 한국터널지하공간학회 논문집
• /
• 제22권4호
• /
• pp.337-346
• /
• 2020

도심권의 교통 집중과 정체로 인하여 지하 공간 활용성이 필요함에 따라 지하구조물에 대한 연구가 늘어나고 있다. 그 중 복층터널은 지하구조물을 대표 할 수 있다. 복층터널은 중간슬래브를 기준으로 상, 하부 차도를 구분하여 운영하고 있다. 중간슬래브는 차량의 하중 및 지진하중에 의하여 동적거동을 한다. 특히 지진의 의한 응답특성은 하중의 크기 및 작용 메커니즘이 매우 복잡하고 이론적 접근이 어려워 실험적 연구가 필요하다. 본 연구에서는 붕괴방지 내진 1등급의 복층터널 중간슬래브에 진동 감쇠 고무받침 유무에 따른 안정성 평가를 실시하는데 목적을 두고 있다. 본 진동대 실험에서는 상사율 1/4을 적용하였으며, 모형실험에서 지반과 모형의 일체거동을 묘사하기 위하여 라이닝과 진동대판을 고정시켰으며 이를 통해서 상대거동을 최소화 하였다. 실험대상은 가상복층터널 TBM 표준단면으로 정했다. 기반암에 가해지는 지반운동 수준을 0.154 g (붕괴방지 수준 내진 1등급 인공지진파)이며 이 가속도를 최대로 하는 지진파를 진동대 입력(기반암)에 작용시켜 모형에 증폭현상을 분석하고 진동 감쇠 고무받침 유무에 따른 중간슬래브의 내진 안정성에 대해 평가 분석 하였다. 그 결과, 지진 감쇠 고무받침 유무에 따라서 지진 가속도 감쇠 효과가 최대 40% 이상 있음을 알 수 있었다.