• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.170-175
• /
• 2013

For this study, the domestically developed bootstrap reservoir of the aircraft is set up in accordance with the temperature and humidity conditions depicted on the qualification test, and the variation in the internal pressure of the bootstrap reservoir of the aircraft is examined. The study shows that the bootstrap reservoir has less variation in the internal pressure at room temperature than at low temperature($-40^{\circ}C$). As a result, the internal pressure can be maintained stably when the temperature of working fluid in the bootstrap reservoir and the atmosphere environment is over room temperature($25^{\circ}C$). Therefore the keeping of temperature above room temperature is very important to operate the bootstrap reservoir of the aircraft properly.

• Korean Journal of Remote Sensing
• /
• v.12 no.1
• /
• pp.60-80
• /
• 1996

AVHRR(Advanced Very High Resolution Radiometer) on NOAA satellite provides data in five spectral, one in visible range, one in near infrared and three in thermal range. In this paper, application of NOAA/AVHRR data is studied for environment monitoring such as cloud top temperature, surface temperature, albedo, sea surface temperature, vegetation index, forest fire, flood, snow cover and so on. The analyses for cloud top temperature, surface temperature, albedo, sea surface temperature, vegetation index and forest fire showed reasonable agreement. But monitoring for flood and snow cover was uneasy due to the limitations such as cloud contamination, low spatial resolution. So this research had only simple purpose to identify well-defined waterbody for dynamic monitoring of flood. Based on development of these basic algorithms, we have a plan to further reseach for environment monitoring using AVHRR data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.288-289
• /
• 2006

We studied the effect of sol-gel processing and sintering temperature on the microwave properties of $MgCo_2(VO_4)_2$ system(MCV) which is applicable to LTCC(low-temperature cofired ceramics). The MCV was synthesized by sol-gel process using solution that contains precursor molecules for Mg, Co, and V. SEM analysis shows that the average particle size is ${\sim}1{\mu}m$ and size distribution is very uniform compared to the one prepared by conventional solid-state reaction process. Highly dense samples were obtained at the sintering temperature range of $750^{\circ}C{\sim}930^{\circ}C$. The maximum $Q{\times}f_0$ value of 55,700GHz, dielectric constant(${\varepsilon}_r$) of 10.41 and temperature coefficient(${\tau}_f$) of $-85ppm/^{\circ}C$ was obtained at the sintering temperature of $930^{\circ}C$. The superior microwave properties of sol-gel processed MCV relative to conventional solid-state reaction processed one is remarkable especially at lower sintering temperatures such as $750^{\circ}C$ and $800^{\circ}C$.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.5
• /
• pp.373-380
• /
• 2000

The flow melting behavior of the electrolytic tinplate during reflow treatment was investigated in terms of morphology and structure of coating layers which were electrodeposited with variation of electrolyte temperature. It was commonly found that the nucleation density of the electrodeposits showed little difference with the electrolyte temperature, and the growth of electrodeposited tin occurred along <100> direction of (002) plane. At low electrolyte temperature, the (002) plane of tin nucleated paralleling to the substrate and grew perpendicularly to the substrate, which rendered porous rod-like deposits. With increasing the temperature, the (002) plane nucleated declining $15^{\circ}$ to the substrate and also grew to the normal <100> direction, which enabled lateral growth of the tin crystals and rendered compact deposits. During reflow treatment, the matte deposit transformed to the reflowed state via transition regions consisted of contraction, island formation, and wetting . The matte deposits formed at low temperature exhibited wide transition regions because of poor thermal transfer between crystals due to their porous nature. While that formed at high temperature transformed very rapidly to the reflowed state by enhanced thermal transfer between the compact crystals.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.133-137
• /
• 2011

Winterkill can be defined as any injury including freeze stress kill, winter desiccation, and low temperature disease to turfgrass plants that occurs during the winter period. The major damages from winterkill were low temperature kill, crown hydration, and winter desiccation. Low temperature kill is caused by air and soil temperature. Soil temperature affect more severe to turfgrass than air temperature because low soil temperature cause fetal damage to turfgrass crown. Crown hydration is a form of winter injury in which intercellular water within the plant freezes and causes physical injury to the cell membrane and wall. This is eventually resulted in dehydration of cell. Winter desiccation is the death of leaves or whole plants due to drought during the winter period. To reduce winterkill damage, cultivar selection is very important. If changing cultivar is not allowed, cold temperature hardiness needs to be increased by providing nutrients especially phosphorus and potassium in the late fall. Turf cover is effective way to reduce winterkill damage. Remaining snow is positive process to reduce winterkill damage by insulating soil temperature. The previous researches reported many materials as turf cover such as straw, polypropylene, polyester, and wood mat. Aeration and topdressing is one of the process against winterkill. Both methods are mainly conducted to reduce thickness of thatch layer. In recent, relatively new materials called black or winter topdressing sand are used to protect soil temperature from low air temperature and thaw ice crystal that may remain in soil.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.219-222
• /
• 2005

Recently, the interest of the engine capacity and environment of the atmosphere is increasing, so the researches for the engine capacity have been conducted for a long time. But the internal environment of an automotive engine is very severe. A piston is exposed to combustion gas of over $2000^{\circ}C$ and strong friction is occurred by high speed motion in the cylinder. The fraction between piston and wall of the cylinder causes the increase of temperature in the engine. The temperature of the engine has an effect on the engine capacity. If the temperature is high, the capacity of the engine is low. So we have to maintain the optimum temperature. To maintain the optimum temperature, the enough flow rate of the engine oil is needed. The oil jet is used to control the flow rate of the engine oil and supply the engine oil to the piston and cylinder. The purpose of this study is to check the mass flow rate of the engine oil and the characteristics of internal flow of the oil jet. Flow pattern of the engine oil is very important because it concludes the loss in the oil jet. This study is the previous research about the oil jet and we will consider the movement of the ball check valve to get more accuracy result.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1104-1112
• /
• 1988

In this study the structure of a two phase detonation has been numerically investigated through the assumption of a steady and one-dimensional flow in the suspension of carbon particles and pure oxygen. The bow shock formation in front of carbon particles has been taken into consideration when the relative velocity of gas flow with respect to the particle exceeds the local speed of sound. But its effect was found to be very limited to the induction zone only. Furthermore the interior particle temperature distribution has been considered in this work. It was found that the inner temperature gradient was very steep in the region of high relative velocity. On the while the temperature distribution inside the particle was almost uniform in the region of low relative velocity. Overall, the effect of the interior particle temperature distribution has been significant in the two phase detonation.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.383-391
• /
• 2014

In this paper, temperature, pressure and flow analysis system for testing a fuel filter of a diesel engine at the low-temperature environment in winter, is proposed. The light oil of diesel engine below a specific temperature is changed to the waxing materials like paraffin, and it prevents engine to start easily because of reducing fluidity. Thus, built-in block heater should be installed with fuel filter in order to solve this problem. And it is necessary to design evaluation system that can analyze the performance according to temperature, pressure and flow characteristics near fuel filter at a very low temperature. In this paper, we measured a physical quantity related to the performance of around the fuel filter using the proposed system, and analyzed their characteristics. Also the measured data is transferred to remote user by using a web server of embedded systems, and analyzed their conditions in remote place via web browser in order to know the operating status of fuel filter. We installed the proposed system in a small test chamber to verify the performance and took an experiment in normal temperature and very low temperature, and could obtain temperature, pressure and flow of near the fuel filter. As a result, the fuel flow could be improved during operation of the fuel heater.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.199-206
• /
• 1993

We review recent systematic investigation of the X-ray spectra of early type galaxies by using the Einstein data base and present new results by the ROSAT observations. The Einstein data suggested that the galaxies with low X-ray to optical luminosity ratio may have another very soft component. ROSAT observations confirm its presence and call for further study to understand the nature of this very soft emission. The X-ray bright galaxies have emission temperature of ${\sim}\;0.8\;keV$ and show radial gradients in the sense that X-ray emission is softer and more absorbed in the inner region.

• Journal of fish pathology
• /
• v.31 no.2
• /
• pp.93-99
• /
• 2018

Edwardsiella tarda predominantly causes edwardsiellosis in fish at high temperature, but is rarely isolated from water when water temperature is low. However, E. tarda is viable but nonculturable (VBNC) in low water temperature, but it can be revived when water temperature rises and cause disease to fish. Therefore, in order to prevent disease, it is very important to identify pathogens that are in the VBNC state in environmental water. In this study, E. tarda cells in the VBNC state were detected by the ethidium monoazide (EMA)-PCR method using the low-temperature oligotrophic sea water microcosm obtained by inoculation of E. tarda at a concentration of $10^8CFU/ml$. In order to distinguish between live and dead bacteria in E. tarda, each sample was treated with EMA at different concentrations, photoactivated with a 500 W halogen lamp, and PCR was performed with E. tarda specific primer. At the concentration of $10^7CFU/ml$ bacterium, DNA amplification was observed only in the live cells when treated with $60{\mu}g/ml$ of EMA, and smaller amounts of live cells could be distinguished from dead cells by adjusting the EMA concentration. In addition, the VBNC cells of E. tarda in the oligotrophic low temperature seawater microcosm were estimated to be in the range of $10^4{\sim}10^5CFU/ml$ by EMA-PCR. Therefore, it is possible to detect VBNC cells that will act as potential pathogens in environmental water using EMA-PCR method, and quantitative confirmation using concentration change is also possible.