• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.141-142
• /
• 2005

To investigate the ZnO thin films which is interested in the next generation of short wavelength LEDs and Lasers, our ZnO thin films were deposited by RF sputtering system. At sputtering process of ZnO thin films, substrate temperature, work pressure respectively is $300^{\circ}C$ and 5.2 mTorr, and the purity of target is ZnO 5N. The thickness of ZnO thin films was about $1.9{\mu}m$ at SEM analysis after sputtering process. Phosphorus (P) and arsenic (As) were diffused into ZnO thin films sputtered by RF magnetron sputtering system in ampoule tube which was below $5\times10^{-7}$ Torr. The dopant sources of phosphorus and arsenic were $Zn_3P_2$ and $ZnAs_2$. Those diffusion was perform at 500, 600, and $700^{\circ}C$ during 3hr. We find the condition of p-type ZnO whose diffusion condition is $700^{\circ}C$, 3hr. Our p-type ZnO thin film has not only very high carrier concentration of above $10^{19}/cm^3$ but also low resistivity of $5\times10^{-3}{\Omega}cm$.

• Journal of Microbiology
• /
• 제41권1호
• /
• pp.34-40
• /
• 2003

Aspergillus nidulans, a homothalic ascomycete, has a complete sexual reproductive cycle as well as an asexual one. Both sexual and asexual development are known to be genetically programmed, but are also strongly affected by environmental factors including nutrients, light, temperature and osmolarity. We have examined these factors to define favored conditions for fruiting body (cleistothecium) formation. In general, fruiting body formation was enhanced where carbon and nitrogen sources were sufficient. Limitation of C-source caused predominant asexual development while inhibiting sexual development. When higher concentrations of glucose were supplied, more cleistothecia were formed. Other carbon sources including lactose, galactose and glycerol made the fungus develop cleistothecia very well, whereas acetate caused asexual sporulation only. Organic nitrogen sources like casein hydrolysate and glycine, and an increase in nitrate or ammonium concentration also enhanced sexual development. In addition to nutrient effects, low levels of aerobic respiration, caused either by platesealing or treatment with various chemicals, favored sexual development. Carbon limitation, light exposure and a high concentration of salts promoted asexual development preferentially, suggesting that stress conditions may drive the cell to develop asexual sporulation while comfortable and wellnourished growth conditions favored sexual development.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.592-595
• /
• 2011

It is well known that modified 9Cr-1Mo steel has a low thermal expansion and high thermal conductivity with excellent high temperature properties compared to austenitic stainless steel. For these advantages, the steel is very popular for the boiler tube of thermal power plants. Normalizing is commonly utilized to obtain martensite in this steel, which shows an unusual toughness for martensite. However, some accidents related to this steel have been reported recently, opening the necessity for further study. As a particular behavior of the steel, an abrupt drop of the impact value has been identified upon tempering at 750$^{\circ}C$ for about 1 hour. It is well known that $Fe_3C$ forms during autotempering and turns to $Cr_2C$ at an early stage and then transforms to $Cr_{23}C_6$. In this study, the cause of the abrupt drop of the impact value was investigated with an impact test, microstructural observation, nanodiffraction and phase analyses using instruments such as optical and transmission electron microscopes (TEM) with an extraction carbon replica of the carbides. The analyses revealed that the $M_2C$ that formed when retained for about 1 hour at 750$^{\circ}C$ causes a drastic decrease in the mechanical properties. The sharp drop in mechanical properties, however, disappeared as the $M_2C$ transformed into $M_{23}C_6$ with longer retention.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.168-174
• /
• 2005

Nowadays, the companies use polymer materials for many purposes fur they have many advantages. The costs of these materials take up too high a proportion of the overall cost of products that use these materials as their major material. It is advantage for polymer industries to reduce these costs. The microcellular foaming process was developed in the early 1980s to solve this problem and proved to be quite successful. Microcellular foaming process uses inert gases such as $CO_2,\;N_2$. As these gases solve into polymer matrices, many properties are changed. The microcellular foaming process makes the glass transition temperature of polymers to low, and diminish the residual stress of polymer matrices. Besides, the microcellular foaming process has several merits, impact strength elevation, thermal insulation, noise insulation, and raw material saving etc. In previous research, many facts of microcellular foaming process are founded its characteristics. But previous researcher found the characteristics of microcellular foaming process with pure gas, for example $CO_2,\;N_2$ and so on, they did not found the characteristics of microcellular foaming process with one more gases. If one more gases inlet the resin, the characteristics of microcellular foaming process is changed very amazingly. In this paper, discuss on the characteristics of microcellular foaming process wi th gas cocktail about cell morphology.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.589-592
• /
• 2005

Micro-forming is a suited technology to manufacture very small metallic parts(several $mm{\sim}{\mu}m$). Micro-forming of $Zr_{62}Cu_{17}Ni_{13}Al_8$ bulk metallic glass(BMG) as a candidate material for this developing process are feasible at a relatively low stress in the supercooled liquid state without any crystallization during hot deformation. In this study, micro-formability of a representative bulk metallic glass, $Zr_{62}Cu_{17}Ni_{13}Al_8$, was investigated for micro-forging of U-shape pattern. Micro-formability was estimated by comparing $R_f$ values $(=A_f/A_g)$, where Ag is cross-sectional area of U groove, and $A_f$ the filled area by material. Microforging process was simulated and analyzed by applying finite element method. FEM simulation results should reasonable agreement with the experimental results when the material properties and simulation conditions such as top die speed, remeshing criteria and boundary conditions tightly controlled. The micro-formability of $Zr_{62}Cu_{17}Ni_{13}Al_8$ was increased with increasing load and time in the temperature range of the supercooled liquid state. Also, FEM Simulation using DEFORM was confirmed to be applicable for the micro-forming process simulation.

• 한국지반환경공학회 논문집
• /
• 제18권9호
• /
• pp.5-9
• /
• 2017

일반적인 지하수에 대해서는 지반공학적 방법((1)지반을 굴착한 후 지중연속벽체의 육안 확인, (2)벽체의 코아 채취 후 일축압축강도시험, (3)벽체 코아 채취 시 현장 투수시험)으로 주열식 지중연속벽체의 차수효과를 확인할 수 있다. 그러나, 폐기물 매립장내에서 발생하는 침출수와 같은 고농도 오염수 유출이나 침투의 차단에 대해서는 주변 지하수 등을 대상으로 현장에서 pH, 수온, 염분 농도 등을 측정하고 이들의 성분시험을 실시하여 기본 성분 및 성분비 등의 특성을 분석한 후 일치성 유사성을 판정하며, GC-MS를 이용하여서는 이들 시료수의 크로마토그램에 대한 피크의 높고 낮음의 차이 등 전반적인 분포패턴을 비교하여 간편하게 유사성 판정을 추가적으로 실시함으로써 객관성 있게 주열식 지중연속벽체의 차수효과를 확인하여야 한다.

• 농업생명과학연구
• /
• 제45권1호
• /
• pp.49-58
• /
• 2011

본 연구는 밤나무 품종개량을 위한 기초자료를 제공하기 위하여 남부지방에서 재배되고 있는 31품종의 개엽 및 개화특성을 조사하였다. 개엽시기는 품종 간에 약간의 차이가 있었으며, 2008년과 2009년에 비해 2010년에 늦게 개엽되었다. 개엽 1단계부터 4단계까지 소요되는 기간은 2008년과 2009년은 약 8일 정도였지만, 2010년에는 약 14일 정도가 소요되었다. 개화특성에 있어서 2008년과 2009년의 경우, 암꽃의 개화개시와 개화완료는 각각 5월 초순과 6월 초순이었으나 2010년에는 늦은 개화개시와 개화완료를 나타내었다. 개화특성에 있어서는 수꽃도 암꽃과 동일한 경향이었으나, 개화개시는 수꽃이 암꽃보다 20일 정도 빠르게 나타났다.

• 농업생명과학연구
• /
• 제44권6호
• /
• pp.213-222
• /
• 2010

본 연구는 농산물 수출잠재력이 높은 러시아국가 중에서 한국과 거리가 가깝고 수출교두보로 활용하기에 유리한 극동러시아 지역으로의 수출사례를 분석하여 수출시장 진출의 성공가능성을 높일 수 있는 시사점을 도출하기 위해 수행하였다. 수출사례 조사업체 수는 5개, 수출사례는 8개이며, 분석대상 품목은 김치, 딸기, 장미, 멜론, 배, 사과 등 7개 수출품목이다. 수출 성공사례는 사전 시장조사 및 수요파악, 포장방법 개선, 유통채널 진입 및 정착, 홍보 및 판촉활동 요인으로, 실패사례는 소비자 인지도 및 선호도 파악 미흡, 저품위 수출 요인으로 구분하여 분석하였다.

• 아시안잔디학회지
• /
• 제9권3호
• /
• pp.235-252
• /
• 1995

Turfgrass Rhizoctonia blight is a severe disease in golf courses in Korea. Attempts were made in 1989 to 1994 to identify the Rhizoctonia species associated with turfgrass blights and also to examine their epidemiology. A total of 120 Rhizoctonia isolates collected were identified as R. solani AG1, R. solani AG2-2, R. cerealis(AG-D) and R. oryzas from brown patch, large patch, yellow patch and white patch, re-spectively. R. solani AG1 was mostly associated with brown patch of cool-season grasses. and most frequently isolated in June through July and also in September. R. solani AG2-2 was isolated exclusively from zoysiagrasses from April to November, most frequently in June through July and October through November. R. cerealis was isolated frequently from both creeping hentgrass in March through April and in November, and zoysiagrass in April and July. Thermophilic R. oryzae was isolated only from creeping bentgrass in August, although with very low frequency. R. solani AG2-2 was strongly pathogenic specifically to Korean lawngrasses(Zoysia japonica, Z.matrella, Z. tenuifolia), but non-pathogenic to creeping bentgrass(Agrostis palustris), bermudagrass (Cynodon dactylon), Kentucky bluegrass(Poa pratensis), perennial ryegrass(Lolium prenne), and creeping red fescue(Festuca rubra subsp. ruhra L.). R. cerealis was strongly pathogenic to zoysiagrass and bentgrass only, but was isolate-specific i.e., from non-pathogenic to pathogenic, for other turfgrasses. The mycelial growth was optimum at relatively high temperature ranges of 25~30$^{\circ}C$ for R.solani AG1, AG2-2 and R. oryzae, while the mycelial growth of R. cerealis was initiated at $^{\circ}C$ and almost ceased at or above $^{\circ}C$.

• 한국광학회지
• /
• 제3권3호
• /
• pp.183-190
• /
• 1992

$Al_x/Ga_{1-x}$ /As/AlAs GaAs 계로 이루어진 비대칭 이중 양자우물 구조의 광학적 특성을 photoluminescence, photoluminescence excitation, time-resolved photoluminescence를 통하여 조사하였다. 양자장벽 AlAs의 두께에 따른 특성 변화를 조사하기 위하여 두께를 15$\AA$., 150$\AA$로 제작하였다. 양자장벽이 15$\AA$인 경우 매우 빠른 전자의 관통 현상을 보여 주었으며, 이로 인해 $Al_x/Ga_{1-x}$As의 여기자 재결합에 해당하는 피크가 관찰되지 않았다. AlAs 양자장벽이 150$\AA$인 경우에는 $Al_x/Ga_{1-x}$As양자우물에서 여기자 재결합에 의한 피크가 50ps 이하로 빠른 decay시간을 보여 주었으며 이것은 양자장벽과의 $\Gamma$-X전이에 의한 것으로 사료되었다. GaAs양자우물에서의 luminescence decay는 두 시료 모두 1ns정도 이었으나, 15$\AA$인 경우에는 약 100ps의 rise시간이 존재하였으며 이것은 정공의 관통에 의한 시간으로 판명되었다.