• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.221-230
• /
• 1999

A new technique for the preparation of porous polyurethane vascular prostheses was investigated. Synthetic vascular grafts with porous wall have been widely proposed, claiming that strength, suture retention, kink resistance, and other handling properties are improved over those with nonporous solid wall. Related to these facts, the control of pores and compliance match have been very important and interesting issues. Two kinds of polymer sheets were compared. One was the porous PU-sheet made at room temerature by the solvent/non-solvent exchange. And the other was the porous PU-sheet fabricated by thermal phase transition and solvent/non-solvent exchange in the thermal controlled bath. According to the result of the above experiments, polyurethane solution was injected into a mold designed for U-type graft. After freezing at low temperature, solvent was dissolved out with alcohol at < $0^{\circ}C$ and water at room temperature to form porous vessels. The average pore size and pore occupation were easily changed by changing polyurethane concentration and freezing rate. This technique can give a proper pore size for tissue ingrowth, and suitable compliances for matching with arteries and veins. In addition, the fabrication of more complicated shaped vessels such as the U-type vascular grafts is easily controlled by using a mold. This method might give a desired compliact graft for artificial implantaion with the commercially available medical polymers.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.252-261
• /
• 1983

Isopropyl alcohol extracted filefish protein concentrate (FPC) and NaOH hydrolyzed filefish protein isolate (FPI) were used for the investigation on the effect of processing conditions on the molecular distribution and functional properties. The molecular distribution of FPC on polyacrylamide gel showed a resemblance to that of fish muscle, but that of alkaline hydrolyzed FPI showed the severe degradation of protein. The content of several amino acids in FPI were lower than those of FPC. The pepsin digestibility of the FPC dried at high temperature was relatively high. FPC didn't exhibit a significant difference in nitrogen solubility at the pH range of 3.0-9.0, while FPI showed a wide difference with the pH change. FPI was more suspensible and rehydrated in water than FPC. Although the aeration capacity of FPI was very low, foam viscosity was higher than that of FPC. In contrast with aeration capacity, FPI presented higher emulsion capacity and lower emulsion viscosity than FPC. The size of fat globule in the emulsion of FPC was larger than that of FPI. In general, most functional properties decreased with the increment in drying temperature, except water holding capacity.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.199-207
• /
• 2001

In the present study the cure behavior of diglycidyl ether of bisphenol-A(DGEBA) using an anhydride-based hardener in the presence of N,N-dimethyl benzyl amine (BDMA) or 1-cyanoethyl-2-ethyl-4-methyl imidazole (2E4MZ-CN) as an accelerator has been monitored and interpreted from the viewpoint of photophysical properties by means of fluorescence spectroscopy. To do this, 1,3-bis-(1-pyrene)propane (BPP) was well incorporated in the epoxy resin system by mechanical blending. The BPP probe, which is very sensitive to conformational change of the molecule influenced by the surrounding medium, successfully formed intramolecular excimer fluorescence. It is susceptible to the micro-viscosity or local viscosity and molecular mobility according to the epoxy cure. The cure behavior was explained with monomer fluorescence intensity ($I_{M}$ ), excimer fluorescence intensity ($I_{E}$ ) and $I_{M}$ /$I_{E}$ ratio as a function of cure time, cure temperature and accelerator. The present work agreed with the previous report on the cure behavior of an epoxy-anhydride system studied using DSC or torsion pendulum method. This study also suggests that the use of fluorescence technique may provide information on cure behavior of a thermosetting resin in a low temperature region, which has not been well interpreted by other analytical methods.

• Nuclear Engineering and Technology
• /
• v.15 no.3
• /
• pp.197-206
• /
• 1983

The slightly hyperstoichiometric uranium dioxide, i.e. U $O_{2.005}$ and U $O_{2.01}$ within a range of the requirement for the use of a nuclear fuel, were sintered directly in an atmosphere of $CO_2$/CO mixture without any succeeding reduction process. The kinetics of sintering in the late stage were investigated for various O/U ratios. A sintering diagram, which show the relation of Temperature-Time-Density-Grain size, was established for each O/U ratio. Only by controlling the oxygen partial pressure in the sintering atmosphere, U $O_2$ pellet could be sintered very easily at low temperature 1050$^{\circ}$～120$0^{\circ}C$ with a density above 95% T.D. and average grain size above 7${\mu}{\textrm}{m}$. It was found that the rate of grain growth follows D=(Kt)$^{1}$4/ in the late stage of sintering. And the activation energies for grain growth in the final sintering stage were found to be 75, 64 and 62kca1/mo1 for U $O_{2.005}$, U $O_{2.01}$ and U $O_{2.10}$, respectively. Although no significant differences are obtained between the activation energies for different O/U ratios, the sinterability is enhanced considerably with increasing the oxygen partial pressure in the sintering atmosphere.tmosphere.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.580-586
• /
• 1996

Gelatinization behavior and morphology of epichlorohydrin-crosslinked potato starches (XPs) were investigated. Native potato starch showed a very steep single stage swlling pattern, but crosslinked starches showed various patterns with the degree of crosslinking. Swelling power, solubility and light transmittance were reduced drastically as the degree of crosslinking increased. Brabender initial pasting temperature and peak temperature of crosslinked starches increased because the crosslinking reinforces the intermolecular net work of the starches. Although the swelling of the potato starch granule was inhibited by crosslinking as compared to that of the native one, Brabender peak viscosities (6.5% w/v, db) were on the order of 2,500 units for the native potato starch, 3,700 for the XP with 2.300 anhydroglucose units per crosslinking (AGU/CL) and 3,400 for the XP with 2,100 AGU/CL, due to the decreased breakdown of the swollen granule resulting from the resistance to heat and shear. The XP with 1,900 AGU/CL, however, did not show the peak viscosity and the viscosity was on the order of 500 units because of the excessive unhibition of the swelling. Unlike the native potato starch, 6.5%(m/v, db) pastes of the crosslinked potato starches could form gels, which could be predicted from the Brabender setback and consistency index. When the degree of crosslinking is low, random contraction and radial swelling of the granule was possible. As the degree of crosslinking increased, morphological change became similar to the single dimensional tangential swelling observed from the lenticular wheat starch. These morphological change during heating in excess water explained the gelatinization behaviors of crosslinked starches tested.

• Journal of the Korean Chemical Society
• /
• v.40 no.2
• /
• pp.101-108
• /
• 1996

The chemical characteristics and age dating of the thermal springwater developed recently in Chullabukdo were investigated. The temperature range of the thermal springwater was found 27∼29$^{\circ}C$, indicating a low temperature thermal springwater. The concentration of $F^-$ ion in the springwater was found relatively high in the range of 2∼3 ppm, but $NO_3^-$ ion was nearly not detected. The concentration range of $SO_4^{2-}$ ion was 0.02∼23 ppm, among which $SO_4^{2-}$ content of $Y_3$ was found very high compared to that of other springwater, since this site is known as a sulfur spring. $HCO_3^-$ ion content was found 2∼5 times higher than that of groundwater. $Y_1,\;Y_3,\;Y_5,\;Y_2,\;Y_4,\;and\;Y_8$, were classified as $HCO_3^-$ type, $Y_6$ as $CI^-$type, and $Y_7$, as no domonant type by classification diagram for anion and cation facies. From the results of age dating on the basis of the mean tritium level of precipitation and thermal springs, $Y_1$ was identified as the oldest thermal spring (-89 years) and $Y_7$ was identified as -89 years and $Y_7$ was -1 year using dispersive model. The results calculated by two models agreed well each other.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.453-459
• /
• 2001

It is important for the fabrication of nuclear cladding to optimize the microstructure, because the properties of Zr-based nuclear claddings such as mechanical properties, oxidation-resistance and corrosion- resistance vary widely with its microstructure. The microstructure in Zr-based alloy is strongly dependent on the solubility of alloying element. However, it is very difficult to measure the solubility due to the low solution limit of alloying elements in Zr-based alloy. In this study, Thermoelectric Power(TEP) measurements are used to determine the solubility of Nb in Zr-0.8Sn alloy, which is confirmed by optical microscopy and transmission electron microscopy. The solutioning of Nb obtained by a homogenization treatment and water-quench leads to a decrease of TEP The saturation of TEP appears with the increase of homogenization temperature, which means the saturation of the Nb content in the matrix. From these results, the solubility ($C_{Nb}$) of Nb in Zr-0.8Sn with temperature could be expressed as fellow equation : $4.69097{\times}10^{16}{\times}e^{-25300\times\;I/T}$(ppm.at.%)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.21-27
• /
• 2016

Global warming due to greenhouse gas emissions is considered as a major problem worldwide, and many countries are making great efforts to reduce carbon dioxide emissions. Many technologies in post-combustion, pre-combustion and oxy-fuel combustion $CO_2$ capture have been developed. Among them, a hybrid pre-combustion $CO_2$ capture system of a water gas shift (WGS) reactor and a membrane gas separation unit was investigated. The 2 stage WGS reactor integrated high temperature shift (HTS) with a low temperature shift (LTS) was used to obtain a higher CO conversion rate. A Pd/Cu dense metal membrane was used to separate $H_2$ from $CO_2$ selectively. The performance of the hybrid system in terms of CO conversion and $H_2$ separation was evaluated using a 65% CO, 30 % $H_2$ and 5% $CO_2$ gas mixture for applications to pre-combustion $CO_2$ capture. The experiments were carried out over the range of WGS temperatures ($200-400^{\circ}C$), WGS pressures (0-20bar), Steam/Carbon (S/C) ratios (2.5-5) in a feed gas flow rate of 1 L/min. A very high CO conversion rate of 99.5% was achieved with the HTS-LTS 2 stage water gas shift reactor, and 83% $CO_2$ was concentrated in the retentate using the Pd/Cu membrane.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.2
• /
• pp.58-63
• /
• 1980

Three seasme cultivars were compared in viewpoints of ripening developments and yielding potentials per plant after the flowering date. On this study, timely ripening and yielding developments were checked separately with capsules and seeds which outcome from the flowers labelled at 30th of July, the maximum flowering stage. Mostly, size and dry weight developments were estimated and the results obtained are as follows; 1. "Early Russian" was recognized as an ideal cultivar with large sized capsule and high lipid contents. However, under the enough ripening periods and ripening conditions (temperature, lights, and nutrients, etc.), the cultivar has weakness on the capsule developments which is competed with seed developments as mean of sink concern. 2. "Suwon 5" was a high yielding cultivar under the proper ripening weather (F. ex. southern districts), but under the unfavorable ripening conditions the cultivar may have weakness of rapid yield decrease by comparatively later formation of seed weight than the capsule. Especially the cultivar has the very ripening characteristics adapting to southern districts which have higher temperature and later low limiting stage for sesame ripening. 3. "Black colored native" seasme cultivar showed lower yielding and later ripening characteristics among others. Also, under the unfavorable ripening conditions, the cultivar has the weakness of yield decrease. Even under the favorable conditions, the cultivar will still have the weakness which is not able to increase in yield, because the capsule development would be finished in size and dry weight too early to accept the later developments of seeds.e later developments of seeds.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.533-539
• /
• 2007

Cell culture infectivity assay using HCT-8 cell was combined with most-probable-number technique to evaluate the inactivation of Cryptosporidium parvum by various disinfectants, including chlorine, ozone, and UV light. The assay was demonstrated to be as sensitive as animal infectivity assay, which has been considered the "gold standard" for assessing Cryptosporidium oocyst infectivity, and a valuable tool to evaluate inactivation of C. parvum by disinfectants. Bench-scale inactivation study showed that at the condition of $5^{\circ}C$ and pH 7.0, CT value of $1,250mg{\cdot}min/L$ by chlorine and $16mg{\cdot}min/L$ by ozone were required to achieve approximately 1.0 log inactivation of C. parvum, suggesting that even ozone could not be sufficient to inactivate C, parvum at low. temperature. Unlike chlorine and ozone, UV light is very effective to inactivate C. parvum, regardless of temperature. A UV light dose of 2 $mJ/cm^2$ provided at least 3 log inactivation of C. parvum.