• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.179-195
• /
• 2010

In the internal connection system, the loading transfer mechanism within the inner surface of the implant and also the stress distribution occuring to the mandible can be changed according to the abutment form. Therefore it is thought to be imperative to study the difference of the stress distribution occuring at the mandible according to the abutment form. The purpose of this study was to assess the loading distributing characteristics of three different abutments for GS II$^{(R)}$ implant fixture(Osstem, Korea) under vertical and inclined loading using finite element analysis. Three finite element models were designed according to three abutments; 2-piece Transfer$^{TM}$ abutment made of pure titanium(GST), 2-piece GoldCast$^{TM}$ abutment made of gold alloy(GSG), 3-piece Convertible$^{TM}$ abutment with external connection(GSC). This study simulated loads of 100N in a vertical direction on the central pit(load 1), on the buccal cusp tip(load 2) and $30^{\circ}$ inward inclined direction on the central pit(load 3), and on the buccal cusp tip(load 4). The following results were obtained. 1. Without regard to the loading condition, greater stress was concentrated at the cortical bone contacting the upper part of the implant fixture and lower stress was taken at the cancellous bone. 2. When off-axis loading was applied, high stress concentration observed in cervical area. 3. GSG showed even stress distribution in crown, abutment and fixture. GST showed high stress concentration in fixture and abutment screw. GSC showed high stress concentration in fixture and abutment. 4. Maximum von Mises stress in the surrounding bone had no difference among three abutment type. In GS II$^{(R)}$ conical implant system, different stress distribution pattern was showed according to the abutment type and the stress-induced pattern at the supporting bone according to the abutment type had no difference among them.

• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.314-324
• /
• 2010

Objective: The purpose of this study was to determine differences of mandibular anterior alveolar bone thickness and symphysial cross sectional area in 9 different horizontal and vertical facial types. Methods: By using the initial cephalometric radiographs of 270 adult patients (male 135, female 135), the authors measured the buccolingual thickness of anterior alveolar bone on the basis of the root axis and symphysial cross sectional distance. Results: The high angle group showed significantly thinner buccolingual alveolar bone width except for the CEJ area and lingual alveolar bone width ($p$ < 0.05). The low angle group and Class I, II average group showed similar or significantly thicker alveolar bone width than the Class I average group ($p$ < 0.05). The Class III average group showed significantly thinner buccolingual and lingual alveolar bone width than Class I and II average groups ($p$ < 0.05). The Class III high angle group showed minimal alveolar bone width in all facial skeletal types. No significant difference was found in the symphysial cross sectional area of the different vertical facial skeletal types ($p$ > 0.05). Conclusions: The results of this study found that Class III high angle patients have thinner mandibular anterior alveolar bone thickness; therefore, more attention will be needed to determine the incisor position during orthodontic treatment for this group of patients.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering, Inc., Troy, USA) and ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Vivadent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition, Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.196-213
• /
• 2001

A split beam ultrasonic transducer operating at a frequency of 70 kHz to use in the fish sizing echo sounder was developed and the acoustic radiation characteristics were experimentally analyzed. The amplitude shading method utilizing the properties of the Chebyshev polynomials was used to obtain side lobe levels below -20 dB and to optimize the relationship between main beam width and side lobe level of the transducer, and the amplitude shading coefficient to each of the elements was achieved by changing the amplitude contribution of elements with 4 weighting transformers embodied in the planar array transducer assembly. The planar array split beam transducer assembly was composed of 36 piezoelectric ceramics (NEPEC N-21, Tokin) of rod type of 10 mm in diameter and 18.7 mm in length of 70 kHz arranged in the rectangular configuration, and the 4 electrical inputs were supplied to the beamformer. A series of impedance measurements were conducted to check the uniformity of the individual quadrants, and also in the configurations of reception and transmission, resonant frequency, and the transmitting and receiving characteristics were measured in the water tank and analyzed, respectively. The results obtained are summarized as follows : 1. Average resonant and antiresonant frequencies of electrical impedance for four quadrants of the split beam transducer in water were 69.8 kHz and 83.0 kHz, respectively. Average electrical impedance for each individual transducer quadrant was 49.2$\Omega$ at resonant frequency and 704.7$\Omega$ at antiresonant frequency. 2. The resonance peak in the transmitting voltage response (TVR) for four quadrants of the split beam transducer was observed all at 70.0 kHz and the value of TVR was all about 165.5 dB re 1 $\mu$Pa/V at 1 m at 70.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The resonance peak in the receiving sensitivity (SRT) for four combined quadrants (quad LU+LL, quad RU+RL, quad LU+RU, quad LL+RL) of the split beam transducer was observed all at 75.0 kHz and the value of SRT was all about -177.7 dB re 1 V/$\mu$Pa at 75.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The sum beam transmitting voltage response and receiving senstivity was 175.0 dB re 1$\mu$Pa/V at 1 m at 75.0 kHz with bandwidth of 10.0 kHz, respectively. 3. The sum beam of split beam transducer was approximately circular with a half beam angle of $9.0^\circ$ at -3 dB points all in both axis of the horizontal plane and the vertical plane. The first measured side lobe levels for the sum beam of split beam transducer were -19.7 dB at $22^\circ$ and -19.4 dB at $-26^\circ$ in the horizontal plane, respectively and -20.1 dB at $22^\circ$ and -22.0 dB at $-26^\circ$ in the vertical plane, respectively. 4. The developed split beam transducer was tested to estimate the angular position of the target in the beam through split beam phase measurements, and the beam pattern loss for target strength corrections was measured and analyzed.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.71-75
• /
• 2007

This research was conducted from 1 March 2005 to 28 February 2007. We collected data from optician stores around Kwang-Ju city, 208 people aged 40 to 80 years using the cross cylinder method to find out age and gender dependence of near addition. 1. Age dependence of Refractive error shows 5% of emmetropia 34% of myopia and 43% of hyperopia. These results reveal that rate of hyperopia is higher than emmetropia and myopia. Mixed Astigmatism rate was 18%. 2. Near addition required to correct Presbyopia is analyzed as functions of gender and ages. In case of man: 40-44 (+0.75D), 45-49(+1.25D), 50-54(+1.41D), 55-59(+1.92D), 60-64(+2.35D), 65-69(+1.97D), 70(+3.12D), In case of woman: 40-44 (+1.08D), 45-49 (+1.38D), 50-54 (+1.67D), 55-59(+2.05D), 60-64 (+2.50D), 65-69 (+2.57D), $70{\leq}(+3.18D)$. Result shows it's Adding power higher than man. 3. Age dependence of Axis of Astigmatism. In case of horizontal astigmatism 61.2%, vertical 2.8% and rest else for 36%. Setting point from Binocular vision tells that average adding power of 40-44 (+0.75D) or (+1.00D), 45-49 (+1.25D) or (+1.50D), 50-54 (+1.50D), 55-59 (+2.00D), 60-64 (+2.50D), 65-69 (+2.50D) or (+2.75D), over $70{\leq}(+3.00D)$ or (+3.25D) of average adding power.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.502-509
• /
• 2016

The seasonal appearance and the chemical composition characteristics of cladode of Opuntia humifusa were investigated in this study. The minor (horizontal) and major (vertical) axes, the width, and weight of O. humifusa cladode were compared for its appearance features. Moisture, crude protein, ash, fat, color, dietary fiber, mineral, and amino acids contents were measured for the comparison of their chemical composition characteristics. The cladode of O. humifusa harvested in summer showed higher values of minor and major axis, width, and weight than those harvested in winter. According to the results of Hunter color index, cladode of O. humifusa harvested in summer showed the highest lightness level (Hunter L value). In the meanwhile, cladode of O. humifusa harvested in spring showed the highest Hunter a (redness) and b (yellowness) values. Cladode of O. humifusa harvested in summer had the lowest crude protein and crude fat contents, while it showed the highest crude ash content. The total contents of moisture and dietary fiber were significantly greater than summer-harvested cladode of O. humifusa followed by spring- and winter-harvested cladode of O. humifusa. The major mineral content of all seasonal cladode of O. humifusa was $Ca^{2+}$. Glutamic acid and aspartic acid were the major amino acids in all seasonal samples. Contrary, the contents of total amino acids and free amino acids were the lowest in summer-harvested cladode of O. humifusa. Taken together, it was concluded that the appearance and chemical quality of cladode of O. humifusa was versatile depending on the harvesting season.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.1
• /
• pp.1-11
• /
• 2008

Statement of problem: Over the past decade, increased demand for esthetically pleasing restorations has led to the development of all-ceramic systems. Recent reports suggest that the all-ceramic crowns have excellent physical properties, wear resistance, and color stability. In addition, numerous ceramics have excellent biocompatibility, a natural appearance, and improved physical bonding with resin composite luting agents. However, the brittle nature of ceramics has been a major factor in their restriction for universal usage. Functional occlusal loading can generate stress in the luting agent, and the stress distribution may be affected by the marginal geometry at the finish line. Tooth preparation for fixed prosthodontics requires a decision regarding the marginal configuration. The design dictates the shape and bulk of the all ceramic crowns and influences the fit at the margin. Purpose: The purpose of this study was to evaluate the stress distribution within marginal configurations of all- ceramic crowns (90-degree shoulder, 110-degree shoulder, 135-degree shoulder). Material and methods: The force is applied from a direction of 45 degrees to the vertical tooth axis. Three-dimensional finite element analysis was selected to determine stress levels and distributions. Results and conclusion: The result of stress level for the shoulder marginal configuration was more effective on stress distribution at 135-degree shoulder margin. But the stresses concentrated around at 135-degree shoulder margin. The stress decreased apically at the surface between cements and alumina core, and increased apically at the surface between alumina core and veneering porcelain.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.509-522
• /
• 1996

By studying the relationship between the morphology of mandibular symphysis and craniofacial morphology in classIII malocclusion, this study aims at deciding whether the morphogy of mandibular symphysis can be used as a predictor on the growth of mandible. The materials used for this study were the cephalometric radiographs of male class III malocclusion. The subjected age groups were 10-12(G1 group) and 20 and above(G2 group): 50 were selected from each group. Each group was again divided, according to the ratio of symphysis, into Large(L), Average(A), and Small(S). The results of this study were summarized as follows: 1. In average the ratio of symphysis, G2 group showed significantly bigger than G1 group(p<0.05) 2. In both G1 and G2 groups, the ratio of symphysis had no relationship with the measurements on the cranial base and the maxilla(p>0.05). 3. In both G1 and G2 groups, there was not distinct difference in the antero-posterior positions among L, A, S subgroups. 4. L and A subgroups showed significantly larger than S subgroup in lower gonial angle and chin angle in G1 group (p<0.05). 5. In the measurements on the vortical relation of the face, anterior total face height(ATFH) and anterior lower face height(ALFH) of L subgroup were significantly larger than that of S subgroup in G1 group(p<0.05) and also mandible showed a tendency to grow downward vertically. 6. In the measurements on the tooth position and inclination, L subgroup showed as compared with S subgroup a tendency of extrusion of maxillary and mandibular teeth in G1 group, but G2 group showed such tendency only in mandibular teeth. 7. In the measurements on the abnormal growth prediction by Schulhof, in G1, there was no significant difference among L, A, S sugroups. 8. In the correlative analysis of the ratio of symphysis and other measurements, G1 group showed significant correlationships in chin angle, PP/MP angie, ANS-Me and other, while G2 group showed the same only in MP-LIT and MP-LMMC(p<0.05, p<0.01). In summarizing the above, in the G1 group, consisting of young males, no difference was noted in horizontal relation between L and S subgroups; in vertical relation, L subgroup showed a stronger tendency of downward growth of mandible than S subgroup. In adult male G2 group, however, no distinct morphological difference of craniofacial complex by the ratio of symphysis.

• Journal of Science Education
• /
• v.32 no.1
• /
• pp.33-46
• /
• 2008

The purpose of this study was to know whether or not any wrongful description or simple errors were in photosynthesis unit of Biology II textbook under 7th national curriculum and if so, to know whether or not high school teachers recognized and corrected properly the mistakes. The mistakes in photosynthesis unit of text books were determined by the comparison with several reference books and through examination by three plant physiologists in 8 different Biology II textbooks. After the mistakes were analysed, the survey using contents of textbook containing the mistakes was conducted on high school teachers teaching Biology II. As a result, 48 mistakes were determined in 13 subjects. As many as four mistakes were found even in one subject in a certain textbook and a same mistake was found repeatedly in several textbooks. The survey result showed that the teachers who pointed exactly the mistakes out corrected properly, however, the percentage of these ones out of 35 teachers replied to survey was less than 50%. The ratios of correction out of total number of responses were high in question #6 (43%), #4-3 (40%), and #1-2 (32%) which were containing a simple mistake in graph, a wrong word and a wrong picture, respectively. But, no one pointed out and made correction in question #5-1 and #5-2 which were containing Z scheme of light reaction without the legend of vertical axis that should be explained as electron energy or standard reduction potential. The result indicates the possibility that the mistakes in photosynthesis unit of Biology II textbook can be corrected and teached properly by teachers may be low. In order to reduce the possibility that students may have misconceptions about photosynthesis, the list of print's errors should be provided to the teachers and/or the training program and/or workshop for in-service high school biology teachers was recommended.