• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.36-38
• /
• 2007

The instability of the arc in the $CO_2$ arc welding affects the quality of the weld in the automotive industry. This paper evaluates the effects of the arc stability in $CO_2$ arc welding with respect to vertical welding positions. In this experiment, galva-annealed steel sheets(CA) were used as specimens, and these materials were welded by adopting new Cold Metal Transfer (CMT) process. For each sample, fillet joint welding trials were carried out using the same conditions. Each part of welding joints was welded with vertical-up, vertical-down position at $45^{\circ},\;90^{\circ}\;and\;135^{\circ}$ degrees. A high speed camera and a welding signal monitoring system were used for monitoring fluid-flow phenomena in weld pools and frequency measurements, respectively. Through this study, the welding position were found to be key factors mainly to influence the arc stability in $CO_2$ welding moreover and that the arc stability in the vertical-up welding position was observed to be more stable than the vertical-down welding position below $90^{\circ}$.

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.35-42
• /
• 2017

The GMA welding process involves large number of interdependent variables which may affect product quality, productivity and cost effectiveness. The relationships between process parameters for a vertical weldment and mechanical properties are complex because a number of process parameters are involved. To make the vertical-position welding, a method that predicts bead geometry and accomplishes the desired mechanical properties of the weldment should be developed. In addition, a reliable welding process and conditions must be implemented to reduce weld structure failure. In this study, the welding process analysis of investigates the interaction between the heat input and welding parameter(Welding current, Arc voltage, Welding speed) for predicting the weldment hardness.

• Journal of Welding and Joining
• /
• 제26권5호
• /
• pp.66-73
• /
• 2008

Welding work in pre-erection or erection stage of shipbuilding construction to be carried out in flat and vertical upward position mostly and Electrogas welding(EGW) is actively applied especially for vertical butt joint of thicker steel plate recently. In this study considered how to develope and improve mechanical properties of weld metal and HAZ in high heat input welding processes such as EGW and Electroslag welding(ESW) with its welding equipment in order to extend the application range to the longitudinal members and hatch coaming parts of container ship. Some components of welding system and parameters were modified to get the faster travel speed and reduce weld heat input, and also by adding additional filler rods or tubes increase the amount of deposited weld metal. With the test get some good date can apply to actual fabrication work and recommend items to manufacture welding materials make better. Above all things it's a fruition that to prepare the possibility of application of ESW to shipbuilding construction which fill up the gap of stoppage days of more than 20 years.

• Journal of Welding and Joining
• /
• 제18권1호
• /
• pp.83-90
• /
• 2000

It was attempted to improve seam-tracking performance by applying a new arc-sensing algorithm for FCAW(flux-cored arc welding) process in fillet joints. For this study the authors have introduced three different weight factors: $\circled1$ arc currents at the weaving end are more weighted, $\circled2$ arc currents are evenly weighted along the weaving, and $\circled3$ arc currents at the weaving center are more weighted. To evaluate the 3 factors the values of signal-to-noise(S/N) ratio has been measured. The values were obtained for various welding conditions with different gaps in horizontal and vertical fillet joints. The test results showed that the S/N ratio of the 1st case was highest which resulted in the best of seam tracking performance. In addition, the comparison between the seam tracking performance in horizontal fillet joints and that in vertical ones has been done, and the result showed that tracking performance in vertical joints was relatively better than that in horizontal joints.

• 대한조선학회논문집
• /
• 제44권5호
• /
• pp.482-487
• /
• 2007

The container mobilization of material resources has increased continually owing to international economy growth and overseas trade increase in recent years. There are large amounts of order received for container carriers which are the biggest in the world ranging from 8,000 TEU to 10,000 TEU or above The very large container carriers have minimum thickness of sheer strake, upper deck and hatch coaming about $65mm{\sim}90mm$. Therefore, this study is performed in order to develop vertical welding process with high deposition rates applicable to thick plate above 65mm thickness. Electrogas welding process with 1 pole and 2 poles has been developed to apply to vertical joint with thick plates in the shipyard. In this paper, it was explained that the relationship of cross section to various groove types and executed that electrogas welding for thick plates. The mechanical tests were carried out to verify the soundness and effectiveness of EGW.

• Journal of Welding and Joining
• /
• 제28권6호
• /
• pp.10-14
• /
• 2010

• 융합신호처리학회논문지
• /
• 제23권4호
• /
• pp.241-248
• /
• 2022

SRD(Shear Reinforcement of Dual Anchorage)는 건축 현장에서 철근 콘크리트 구조물의 안전성을 보강하는 데 사용된다. 전단 보강재를 만들 때에는 용접이 사용되며, 용접은 제품의 생산성 및 경쟁력을 좌우하는 데 중요한 역할을 한다. 따라서 용접 비드 검출 검사가 필요하다. 본 연구에서는 용접 비드의 영상 자료를 이용하여 용접 비드를 검사하는 알고리즘을 제안한다. 제안한 알고리즘은 먼저 영상 내 수직 방향으로 밝깃값을 계산한 뒤, 밝깃값 분포의 50% 높이 지점에 해당하는 위치를 영상에서 찾아서 수직 방향으로 용접 비드를 분할한다. 그리고 수평 방향에 대해서도 동일한 방법으로 용접 비드 영역을 분할한 뒤, 분할 영상을 분석하여 용접비드 유무를 검사한다. 제안한 알고리즘은 관심 영역을 먼저 지정한 뒤 분석을 수행하여 연산량을 감소시켰다. 또한 SRD 영상에서 모재와 용접 비드 영역 사이에 밝깃값의 차이 특징을 이용하여 수직 및 수평 방향의 모든 밝깃값을 이용함으로써 정확도를 높일 수 있었다. 실험에서는 용접 비드 유무를 검출하기 위한 방법들로써 K-평균, k-최근접 이웃 등 5개의 알고리즘을 이용하여 분석 결과들을 비교하였으며, 타 알고리즘들에 비해 제안한 알고리즘의 정확도가 가장 높음을 보였다.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.42-48
• /
• 2012

Due to increase in demand of stable and long pipelines in natural gas industry, wide range of researches are being performed on automation welding to improved welding quality with respect to weld process parameters in real time measurement. In particular, the coupling between the pipe manufacturing process and location of the weld seam, the measured size of the gap that exists in the weld position and the weld angle depending on whether the movement of molten weld. This is due to absence of controlling welding penetration position, depending on the required size of the angle of the setting. In addition, the optimum welding conditions must be considered while selecting, the correlation between these variables and the systematic correlation has not yet been identified. Therefore, in most welded pipe root-pass weld solely depends on the experience of workers in relation to secure a stable weld quality. In this study, automation welding system is implemented to select a suitable root-pass STT (Surface Tension Transfer) welding method using the optimal welding conditions. To successfully accomplish this objective, there were various welding conditions used for welding experiment to confirm that the assessment required for construction through the pipe and automatic welding process is proposed to optimize this plan.

• 한국산학기술학회논문지
• /
• 제17권6호
• /
• pp.246-254
• /
• 2016

초대형 유류 저장탱크의 후판 용접은 작업자가 직접 손용접을 수행하는데 이로 인해 제품의 품질이 저하되고 재용접율 증가로 인하여 품질 불균일이 발생하며 작업 외부환경 등에 따른 용접 제약성도 많이 따른다. 따라서 본 연구에서는 이러한 문제점을 개선하고 용접의 신뢰도를 높이며 공사기간 단축 및 원가절감으로 생산성을 향상시키고자 자동으로 수직 용접이 가능한 용접 캐리지 시스템을 개발하였다. 수직 용접 캐리지 시스템은 용접 플랫폼 시스템, 용접 캐리지 구동장치 및 제어장치 등으로 구성되고 도출된 설계 사양이 만족되도록 개념설계가 이루어졌으며 각각의 서브시스템은 모듈로서 설계되어지고 제작, 조립되었다. 개발된 시스템에 대해 구조적 안정성 평가와 사전 문제점을 파악하고자 구조강도 해석을 수행하여 구조적 안정성을 확인하였고 그 결과를 설계에 반영하고자 하였다. 또한 개발된 시제품의 성능평가를 위해 수직 용접된 후판에 대한 인장시험, 굽힘시험, 충격시험 및 용접시간 등을 요구조건 및 수동용접과 비교 평가를 수행하였고 만족스러운 결과를 획득할 수 있었다. 특히, 수직 용접시간은 수동용접과 비교한 결과 87%이상 향상되었음을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.32-38
• /
• 2000