• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.572-585
• /
• 1999

The characteristics of two-phase flow instability in a vertical boiling channel connecting with an unheated riser are investigated through the linear stability analysis model. Various two-phase flow models, including thermal non-equilibrium effects, are taken into account for establishing a physical model in the time domain. A classical approach to the frequency response method is adopted for the stability analysis by employing the D-partition method. The adequacy of the linear model is verified by evaluating experimental data at high quality conditions. It reveals that the flow-pattern-dependent drift velocity model enhances the prediction accuracy while the homogeneous equilibrium model shows the most conservative predictions. The characteristics of density wave oscillations under low-power and low-quality conditions are investigated by devising a simple model which accounts for the gravitational and frictional pressure losses along the channel. The necessary conditions for the occurrences of type-I instability and flow excursion are deduced from the one-dimensional D-partition analysis. The parametric effects of some design variables on low quality oscillations are also investigated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.111-118
• /
• 1994

The use of steel sheet pile walls as barrier walls have the temporary for coffer dam, retaining wall in excavation, etc., but also permanent of semi-permanent for harbor construction, containment systems, vertical barrier systems for waste disposal (landfill) or subway in excavarion. In all these applicaions the resistance of the structure to seepage plays an important role. Also the stability and longevity of the construction, the possibility of permanent control and survey make the steel sheet pile wall a nearly perfect vertical barrier from a technical and economical point of view.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2400-2404
• /
• 2011

Power spectral density (PSD) model of irregularities for the maglev test track is presented. Track irregularities (gauge, cant, twist and vertical) were calculated from the survey data of sleepers on the test track. PSD model was constructed from the estimated PSDs of each track irregularities. Versine (gauge, cant, twist, vertical and lateral) of the track is obtained and their PSDs were estimated, too. Presented PSD model can be used for the analysis of levitation stability and ride quality of the maglev system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.67-68
• /
• 2000

Polycrystalline silicon (poly-Si) thin film transistors (TFT's) employing vertical amorphous silicon (a-Si) offsets have been fabricated without additional photolithography processes. The a-Si offset has been formed utilizing the poly-Si grain growth blocking effect by thin native oxide film during the excimer laser recrystallization of a-Si. The ON current degradation of the new device after 4 hour's electrical stress was reduced by 5 times compared with conventional poly-Si TFT's.

• 대한치과교정학회지
• /
• 제51권1호
• /
• pp.15-22
• /
• 2021

Objective: The aim of this study was to evaluate the correlation between the vertical position of maxillary first molar and vertical skeletal measurements in lateral cephalograms by using new linear measurements on the vertical axis of coordinates with calibration. Methods: The vertical position of maxillary first molar (U6-SN), and the conventionally used variables (ConV) and the newly derived linear variables (NwLin) for vertical skeletal patterns were measured in the lateral cephalograms of 103 Korean adults with normal occlusions. Pearson correlation analyses and multiple linear regression analyses were performed with and without calibration using the anterior and posterior cranial base (ACB and PCB, respectively) lengths to identify variables related to U6-SN. Results: The PCB-calibrated statistics showed the best power of explanation. ConV indicating skeletal hyperdivergency was significantly correlated with U6-SN. Six NwLin regarding the position of palatal plane were positively correlated with U6-SN. Each multiple linear regression analysis generated a two-variable model: sella and nasion to palatal plane. Among the three models, the PCB-calibrated model yielded highest adjusted R2 value, 0.880. Conclusions: U6-SN could be determined by the vertical position of the maxilla, which could then be used to plan the amount of molar intrusion and estimate its clinical stability. Cephalometric calibration on the vertical axis of coordinates by using PCB for vertical linear measurements could strengthen the analysis itself.

• 한국물환경학회지
• /
• 제33권4호
• /
• pp.449-459
• /
• 2017

In Geum River of Korea, three multi-purpose weirs were built at the downstream of Daecheong Reservoir during the Four Major River Restoration Project (FMRRP). The weirs have altered the hydraulic characteristics of the river, and consequently transformed the large areas of flowing ecosystem to deep and wide stagnant environment. In every summer, a thermal stratification occurred near the Baekje Weir having mean depth of 4.0 m, and the surface algal blooms dominated by buoyant cyanobacteria have been frequently formed after the FMRRP. The objective of this study was to investigate the relationship between flow velocity and thermal stability of the waterbody using a three-dimensional (3D) hydrodynamic model (EFDC+) after calibration against the thermistor chain data obtained in 2014. A new Sigma-Zed vertical grid system of EFDC+ that minimize the pressure gradient errors was used to better simulate the thermodynamics of the waterbody. The model reasonably simulated the vertical profiles of the observed water temperatures. The vertical mean flow velocity and the Richardson Number (Ri) that represents the stability of waterbody were estimated for various management water levels and flow rates scenarios. The results indicated that the thermal stability of the waterbody is mostly high ($Ri{\gg}0.25$) enough to establish stratification, and largely depend on the flow velocity. The critical flow velocity that can avoid a persistent thermal stratification was found to be approximately 0.1 m/s.

• 한국건설관리학회논문집
• /
• 제8권6호
• /
• pp.216-226
• /
• 2007

건설프로젝트의 고층화, 대형화 추세에 따라 효율적인 양중계획의 중요성이 부각되고 있다. 양중작업의 대부분을 차지하고 있는 타워크레인의 경우, 양중부하에 적합한 최적 크레인을 선정하고 안전성을 확보하는 것은 생산성뿐만 아니라 프로젝트의 원가, 공기 등의 측면에서 매우 중요하다. 따라서 철저한 사전계획에 따라 적합한 크레인을 선정한 후 안전하게 지지하는 일련의 작업은 전문적인 지식을 필요로 한다. 그러나 전문가의 수가 제한적이며, 이들 전문가의 경우에도 다양한 크레인의 양중성능, 운전특성, 임대가 등에 대하여 상세히 알기보다는 본인들이 주로 사용한 제한적 수의 크레인에 대한 정보를 가지고 있을 뿐이다. 따라서 본 연구는 고층공사의 양중계획단계에서 현장조건에 따른 최적 타워크레인을 선정하고 그 안정성을 쉽고 빠르게 검토할 수 있는 선정시스템을 구축하였다. 본 선정시스템은 크레인 선정시 다양한 기종 및 성능에 대한 정보제공은 물론, 해당 크레인의 기초판과 횡지지에 대한 안정성을 실시간으로 비주얼하게 검토할 수 있어 크레인 선정에 효과적인 도구로 사용될 것으로 예상한다.

• 한국지반공학회논문집
• /
• 제38권8호
• /
• pp.67-74
• /
• 2022

지반굴착시 지반안정성 검토를 위한 대상지역의 설정은 이론식 및 경험식 추정방법과 수치해석에 의한 방법으로 구분한다. 일반적으로 적용되는 이론식 및 경험적 추정 방법은 Peck(1969)의 곡선방법, Caspe(1966)의 방법 및 Clough 등(1990)의 방법이 있다. 수치해석에 의한 방법은 과업구간의 현황(지반조건이 가장 취약한 구간, 최대 굴착심도 구간, 주요 인접 구조물 위치 구간 등)을 종합적으로 고려하여 가장 취약한 단면에 대해 2차원 및 3차원 수치해석을 수행한 결과를 반영하였다. 본 논문에서는 위와 같은 이론식 및 경험식, 수치해석을 통해서 000선 복선전철 민간투자사업의 수직구 구간 및 터널 구간 굴착시 영향범위를 설정한 사례를 보여주고자 한다.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.152-162
• /
• 1996

A four-legged Walking Machine can move on the plain terrain with mobility and stability and stability, but if there exist any obstacles on the terrain of the motion direction, it takes extra time to cross those obstacles and the stability should be considered during motion. The main objective is the study a Quadruped which can cross obstacles with better mobility, stability and fuel economy than any other wheeled or tracked vehicles. Vertical step, isolated wall and ditch are the basic obstacles and by understanding those three cases perfectly, a Quadruped can move on any mixed rough terrain as 4-legged terrestrial vertebrates move. Each leg of a Quadruped has a limited walk space called a walking volume and this is very important to deter- mine the crossing capability in a static analysis. A Quadruped can be simplified with links and joints. By applying the research method, a quadruped can determine the control procedures as soon as it receives the terrain information from scanner and finally can move with mobility and stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권2호
• /
• pp.137-143
• /
• 2011

Purpose: Orthognathic surgery is required in patients with severe skeletal disharmony and facial asymmetry, which results in functional and esthetic improvement. Recently, bimaxillary surgery has become generalized. Establishment of the occlusal plane among several other factors included in the surgery plan is a major consideration for the diagnosis and treatment plan and it is also an important factor for postoperative stability. Methods: In this study, we assessed postoperative stability of occlusal plane, B-point, and pogonion point on 20 patients who underwent two-jaw surgery in the Chosun Dental Hospital from 2000 to 2007. Preoperative and postoperative states and at least a one year postoperative follow-up were compared. Results: The postsurgical relapse volume of the occlusal plane to the SN plane and the FH plane was $-0.26{\pm}2.8^{\circ}$ and $-0.44{\pm}3.29^{\circ}$, respectively and after two-jaw surgery, the stability of occlusal plane was maintained. The horizontal relapse degree was $0.85{\pm}0.46$ mm and $0.76{\pm}0.48$ mm, respectively, and the vertical relapse degree was $1.16{\pm}0.36$ mm and $1.13{\pm}0.71$ mm of the B point and the Pogonion point at the time after minimal 1 year. Conclusion: The vertical relapse amount was shown to be slightly larger than the horizontal relapse amount.