• Korean Journal of Poultry Science
• /
• v.6 no.2
• /
• pp.91-102
• /
• 1979

The basic problem of the broiler industry is that of fluctuating prices, mainly thanks to unstable supply of and inelastic demand for products as usually indicated as a peculiarity of agricultural commodities. This particularly brings the producer to a great economic risk, because he has to sell products under the condition of pure competition, whereas others from whom he has to buy deal under the condition of oligopoly or even monopoly. Therefore, producers economic position is generally placed in the worst comparing others dealing with, which results in unbalanced economic status of elements involved in broiler operation and further obstruction of industry development as a whole. A certain type of business coordination to overcome such a problem should be measured in order to improve the efficiency of entire operation and thus assure the balanced industry development. The concept of the economic integration developed in modern business system had been adapted to U.S. poultry industry which became common later around the world as a means of stabilizing producers price and whole industry as well. There are two main typos of integration; horizontal and vertical The former refers to the general grouping of similar business units, eg. a hatchery tying with other hatchery, while the latter refers to the knitting together of two or more stages of economic activities, eg. tying together among units of hatching, fled milling, production, processing and marketing. By having the industry integrated, risk and uncertainty involved in various stages of operation could be diversified. The typo of integrating contract between producers and integrators include the share of profits, flat fee payment, feed conversion payment and salary basis. In the U.S., extensive changes in production, processing, and marketing during the last few decades have changed the thicken broiler industry from one of small, widely scattered farms to one that is largo, concentrated and efficient. More than 99 percent of all broilers produced are grown under contract and by integrated firms which vary in size of operation and complexity. About 84 percent of all production is concentrated in 10 States. Some of the other factors ;hat contributed to these choses arc costs, energy use, prices, processing, marketing and demand. No integrated broiler production system has yet been applied in Korea's poultry industry, thus all stages all broiler operation run independently seeking for its own profit. Consequently, producers price fluctuate very widely around the year even more than 50 percent in a few months. This also leads to disadvantages of material supplies, processors and distributors and enforce the industry unstable. The current economic environment in Korea seems that the time for broiler integration comes and as an ideal integrator, feed millers, food processors and producers group may be considered.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.335-343
• /
• 2003

An experiment was conducted to investigate types of injury inflicted by the stone leek leafminer, Liriomyza chinensis Kato (Diptera: Agromyzidae) on welsh onion. A feeding scar made by an adult female was a hole round in shape, with diameter of 0.08 mm and 0.48 mm in lesion, resulting in a white spot, many of which often form vertical dotted lines on a leaf. Egg spots were oval with 0.1 ${\times}$0.14 mm in size, one or several of which often form a V-shape in group. Feeding by adults began immediately after emergence and was very active from 4th to 5th day. Oviposition was done from 2nd to 6th day after emergence. In both feeding and oviposition, they were more active in the day time. Larvae after emergence crawled up the leaf at first, and then moved up and down to feed on mesophyll. When in high density, they feed on leaf from leaf tip to bottom, and let the leaf die. Area of damage per one larva was calculated as 72.1 $\textrm{mm}^2$. The aged larvae escaped from the leaf in early morning, usually between 5 and 7 am. Most pupation sites were distributed near plants,5cm in soil depth and within 10 cm away from the plant. Pupae of L. chinensis overwintered 10cm below soil surface and emerged from early May to late June the next year Adults then moved to welsh onions near over wintering sites, nursery, transplanted, and levee.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.853-859
• /
• 2007

This paper presents a microstrip patch array antenna having transmission feed and reception feed for satellite communication in the Ku band. In this paper, the element of the patch array antenna is a three-stacked structure consisting of one radiation patch and two parasitic patches for high gain and wide bandwidth characteristics. To obtain higher gain, the unit elements are expanded into a $1{\times}8$ may using a mixture of series and parallel feeds. The proposed antenna has horizontal polarization for the Rx band and vertical polarization for the Tx band. To verify the practicality of this antenna, we fabricated a three-stacked patch array antenna and measured its performance. The gain of the array antenna in the Rx and Tx bands exceeds 17 and 18 dBi, respectively. The impedance bandwidth is over 10 % in both bands. The cross-polarization level is below -25 dB, and the sidelobe level is below -9.4 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.492-501
• /
• 2013

In this paper, a multi polarization reconfigurable microstrip antenna that can be used selectively for four polarizations(vertical polarization, horizontal polarization, right hand circular polarization, left hand circular polarization) at the S-band is presented. The proposed antenna consists of four PIN diodes and a microstrip patch with a cross slot and a circular slot and is fed by utiliting electromagnetic coupling between the microstrip patch and the feed line. The proposed antenna has a DC bias network to supply DC voltage to each PIN diode and the polarization can be determined by controlling the ON /OFF states of four PIN diodes. The fabricated antenna has a VSWR below 2 in the vertical polarization(3.17~3.21 GHz), the horizontal polarization(3.16~3.20 GHz), the left hand circular polarization (3.08~3.19 GHz), and the right hand circular polarization(3.10~3.2 GHz) frequency bands. The designed antenna has the cross polarization level higher than 20 dB, a gain over 5 dBi for the linear polarization states, and 3 dB axial ratio bandwidth wider than 50 MHz in the circular polarization states.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.11-21
• /
• 2020

This paper deals with the impact of a GNSS (Global Navigation Satellite System) antenna radome on the PCV (Phase Center Variations) and the estimated kinematic coordinates. For the Trimble and Leica antennas, specially set up CORS (Continuously Operation Reference Stations) in Korea, the PCC (Phase Center Corrections) were calculated and compared for NONE, SCIS, SCIT, and TZGD radome from the PCV model published by the IGS (International GNSS Services). The results revealed that the PCC differences compared to the NONE were limited to about 1mm in the horizontal component while those of the vertical direction ranged from a few millimeters to a maximum of 7mm. Among the radomes of which PCV were compared, the SCIT had the most significant influence on the vertical component, and its GPS (Global Positioning System) L2 and L2 PCC (Phase Center Corrections) had opposite direction. As a result of comparing the kinematic coordinates estimated by the baseline processing of 7 CORSs with an application of the PCV models of the various radomes, the SCIS which was actually installed at CORS in Korea showed 3.4mm bias, the most substantial impact on the ellipsoidal height estimation whereas the SCIT model resulted in relatively small biases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.806-812
• /
• 2009

In this paper, the omnidirectional circularly polarized(CP) antenna using arc-shaped mushroom structure with curved branch is proposed. To obtain a vertical polarization and an omnidirectional radiation pattern, the CP antenna uses zeroth-order resonance(ZOR) mode of composite right and left handed(CRLH) transmission line. The horizontal polarization is achieved by the curved branches. Also, the spacing between curved branch and arc-shaped mushroom structure gives the $90^{\circ}$ phase difference between vortical and horizontal polarization. The proposed antenna, therefore, has an omnidirectional CP radiation pattern In the azimuthal plane. The electrical size of the proposed antenna is reduced by 38%, compared with that of the previously presented omnidirectional CP antenna. In addition, the CP antenna is simply designed without $90^{\circ}$ phase shifter and dual feed line. The proposed antenna uses a Bazooka balun for good impedance matching and radiation pattern. To improve 3 dB axial ratio in XY plane, the designed antenna is optimized. After optimization, the measured 3 dB axial ratio in XY plane is observed in $86{\sim}282^{\circ}$.

• Journal of Sensor Science and Technology
• /
• v.29 no.5
• /
• pp.354-359
• /
• 2020

The high vacuum hermetic sealing technique ensures excellent performance of MEMS resonators. For the high vacuum hermetic sealing, the customization of anodic bonding equipment was conducted for the glass/Si/glass triple-stack anodic bonding process. Figure 1 presents the schematic of the MEMS resonator with triple-stack high-vacuum anodic bonding. The anodic bonding process for vacuum sealing was performed with the chamber pressure lower than 5 × 10^-6 mbar, the piston pressure of 5 kN, and the applied voltage was 1 kV. The process temperature during anodic bonding was 400 ℃. To maintain the vacuum condition of the glass cavity, a getter material, such as a titanium thin film, was deposited. The getter materials was active at the 400 ℃ during the anodic bonding process. To read out the electrical signals from the Si resonator, a vertical feed-through was applied by using through glass via (TGV) which is formed by sandblasting technique of cap glass wafer. The aluminum electrodes was conformally deposited on the via-hole structure of cap glass. The TGV process provides reliable electrical interconnection between Si resonator and aluminum electrodes on the cap glass without leakage or electrical disconnection through the TGV. The fabricated MEMS resonator with proposed vacuum packaging using three-layer anodic bonding process has resonance frequency and quality factor of about 16 kHz and more than 40,000, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.33-39
• /
• 2013

In this paper, X/Ku band waveguide diplexers with H-plane T-junction for satellite communication systems is proposed and its characteristics is cinfirmed. Two frequency bands such as X(7.25 ~ 8.4 GHz) and Ku(12.25 ~ 14.5 GHz) can be separated by the proposed waveguide diplexers. A diplexers is normally including low pass filter, high pass filter and junction waveguide. To simplify the structure of the proposed diplexers, the proposed waveguide diplexers is using impedance matching technique on H-plane of the high pass filter without low pass filter. To use vertical and horizontal polarization, the proposed diplexers with orthomode transducer(OMT) characteristics is also designed. Therefore, it is confirmed that the proposed waveguide diplexers can be used as dual-band and dual-polarization diplexers for satellite communication feed systems.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.69-74
• /
• 2000

The bandwidth of microstrip slot antenna with T-shaped feed line was a wider than one of the conventional feeding structure. When the slot antenna with bi-directional radiator wants to radiate only one direction, the reflector must be set up seperately. But this antenna doesn't need set up reflector. And then we proposed to a new method of a directional slot radiator with a cross-shaped feedline including the reflector using 2-layers dielectric materials. It is calculated waves and electric field distribution in the time domain by using FDTD method. We also are calculated return loss, VSWR, input impedance, and radiation pattern in the frequency domain by Fourier transforming the time domain results, respectively. It was found that the bandwidth of this antenna changes as length($\I_s$) and width($\W_s$) of slot, length of the horizontal feedline($\I_d$), length of the vertical feedline($\I_u$) and offset sensitively. After optimizing the parameters of design, the maximum bandwidth was measured as 1,850MHz at the center frequency 2.5 GHz.

• Journal of Aquaculture
• /
• v.7 no.1
• /
• pp.9-20
• /
• 1994

To find out suitable indoor rearing tank shape and stocking density of the abalone Haliotis discus hannai, young abalones were reared in the square or ellipse shape tanks with various stocking densities and were fed dried sea mustard, Undaria Pinnatifida HARVEY for three years. There were no significant differences between the square rearing tank and the ellipse one in growth rate and survival rate. With regard to vertical design of rearing tanks with three floors, the significant differences were not found among culture floors. However, the growth and survival rates of young abalones from the running water system were significantly higher than those of the abalones from the circulating system (P< 0.05). For the stocking density experiment with 1,000, 1,500 and 2,000 individuals of 20 mm young abalone, there was no significant differences in growth and survival rates among these groups. However, in that of 200-400 individuals of 40 mm abalone and 100-300 individuals of 50 mm abalone, the lower stocking density of young abalone showed the higher growth and survival rates. The lower stocking density and the smaller size of young abalones showed the higher daily feeding rate and feed efficiency.