• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.821-825
• /
• 2005

Tilt rotor aircraft was developed for satisfying VSTOL (vertical short take off and landing) capability and cruise performance. However the noise generated by tilt rotor system causes one of the most serious problems. In this paper, noise characteristics of tilt rotor system in hovering flight are predicted by using free wake method and Lowson's formula. The flow field of the tilt rotor is simulated by using time marching free wake method, and the free field acoustic pressure is calculated through Lowson's formula. The predicted results are compared with experimental data at various observing positions. In the near field, they show good agreement with experimental data regardless of rotating speed and collective pitch angles of 6, 8 and 10 degree, although there are some discrepancies between prediction and experiment in the far field and at the rotating axis in the near field. It seems that the reason of these discrepancies is difference of unsteady force fluctuation between experiment and calculation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.326-329
• /
• 2002

Adequate alveolar bone height and width are required for the successful placement of dental implants. Conventional therapeutic regimens for alveolar atrophy are bone grafts or augmentation using allografts and membrane (GBR). Conventional graft techniques have some limitations and complications such as infection, soft tissue problem and high resorption rate. Recently, distraction osteogenesis of alveolar bone is considered as a new alternative for ridge augmentation. Distraction osteogenesis was originally defined and popularized by Ilizarov for lengthening of long bone. Some clinicians have tried to apply distraction osteogenesis in treatment of maxillofacial discrepancies. It was also used to augment alveolar bone. Cologne study group successfully applied the technique for augmentation of alveolar bone and designed several miniplate-distractor systems fabricated by Martin Medizintechnik GmbH in Germany. Vertical distraction of alveolar bone was successfully completed in 104 patients with miniplate-distractor systems. The mean distance of distraction was 10.2mm (range: 6-15 mm) and the mean length of segment was 45 mm (range: 6-127 mm). 162 dental implants in 54 patients were placed immediately or 4 weeks later after removal of the distractor. The results of our study show that vertical distraction of alveolar bone is an effective and reliable technique to restore alveolar atrophy and alveolar vertical defect caused by trauma or tumor.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.418-435
• /
• 2001

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal However as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nickel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature or root canal and reducing the deformation of root canal. However it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150~350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g. 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1. Analysis of the experiment results revealed that the time spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range ($\beta$-weight test). 2. Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease. In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of greater vertical forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3. Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.148-155
• /
• 2009

Statement of problem: The interest in all-ceramic restorations has increased as more techniques have become available. With the introduction of machinable dental ceramics and CAD/CAM systems there is a need to evaluate the quality levels of these new fabrication techniques. Purpose: This study is to evaluate the crown fidelity(absolute marginal discrepancy and internal gap) of various zirconia-based all-ceramic crowns fabricated with different CAD/CAM(computer-assisted design/computer-assisted manufacturing) systems and conventional cast metal-ceramic crowns. Material and methods: A resin tooth of lower right second premolar was prepared. After an impression was taken, one metal master die was made. Then 40 impressions of metal master dies were taken for working dies. 10 crowns per each system were fabricated using 40 working dies. Metal-ceramic crowns were cast by using the conventional method, and Procera, Lava, and Cerec inLab crowns were fabricated with their own CAD/CAM manufactruing procedures. The vertical marginal discrepancies and internal gaps of each crown groups were measured on a metal master die without a luting agent. The results were statistically analyzed using the one-way ANOVA and Tukey's HSD test. Results: 1. Vertical marginal discrepancies were $50.6{\pm}13.9{\mu}m$ for metal-ceramic crowns, $62.3{\pm}15.7{\mu}m$ for Procera crowns, $45.3{\pm}7.9{\mu}m$ for Lava crowns, and $71.2{\pm}2.0{\mu}m$ for Cerec inLab crowns. 2. The Internal gaps were $52.6{\pm}10.1{\mu}m$ for metal-ceramic crowns, $161.7{\pm}18.5{\mu}m$ for Procera crowns, $63.0{\pm}10.2{\mu}m$ for Lava crowns, and $73.7{\pm}10.7{\mu}m$ for Cerec inLab crowns. Conclusion: 1. The vertical marginal discrepancies of, 4 crown groups were all within the clinically acceptable range($120{\mu}m$). 2. The internal gaps of LAVA, Cerec inlab, and metal-ceramic crowns were within clinically acceptable range except Procera crown($140{\mu}m$).

• Nuclear Engineering and Technology
• /
• v.29 no.4
• /
• pp.291-298
• /
• 1997

In advanced nuclear reactors, the passive containment cooling has been suggested to enhance the safety. The passive cooling has two mechanisms, air natural convection and oater cooling with evaporation. To confirm the coolability of PCCS, many works have been performed experimentally and numerically. In this study, the water cooling test was performed to obtain the evaporative heat transfer coefficients in a scaled don segment type PCCS facility which have same configuration with AP600 prototype containment. Air-steam mixture temperature and velocity, relative humidity and well heat flux are measured. The local steam mass flow rates through the vertical plate part of the facility are calculated from the measured data to obtain evaporative heat transfer coefficients. The measured evaporative heat transfer coefficients are compared with an analytical model which use a mass transfer coefficients. From the comparison, the predicted coefficients show good agreement with experimental data however, some discrepancies exist when the effect of wave motion is not considered. Finally, a new correlation on evaporative heat transfer coefficients are developed using the experimental values.

• Journal of Environmental Science International
• /
• v.8 no.6
• /
• pp.645-652
• /
• 1999

In order to simulate and investigate the major characteristics of El Nino/Southern Oscillation(ENSO) and Madden Jullian Oscillation(MJO), an intermediate type atmosphere-ocean coupled model is developed and their results are examined. The atmosphere model is a time-dependent non-linear perturbation moist model which can determine the internal heating for itself. The counterpart of the atmosphere model is GCM-type tropical ocean model which has fine horizontal and vertical grid resolutions. In the coupled experiment, warm SST anomaly and increased precipitation and eastward wind and current anomalies associated with ENSO and MJO are properly simulated in Pacific and Indian Oceans. In spite of some discrepancies in simulation MJO, the observed atmospheric and oceanic low-frequency characteristics in the tropics are successfully identified. Among them, positive SST anomalies centered at the 100m-depth of tropical eastern-central Pacific due to the eastward advection of warm water and reduced equatorial upwelling, and negative anomalies in the Indian and western Pacific seem to be the fundamental features of tropical low-frequency oscillations.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.124-130
• /
• 2020

PURPOSE. The aim of this in vitro study was to evaluate the effect of sintering procedures on marginal discrepancies of fixed partial metal frameworks fabricated using different sintering-based computer-aided design and computer/aided manufacturing (CAD/CAM) techniques. MATERIALS AND METHODS. Forty resin die models of prepared premolar and molar abutment teeth were fabricated using a three-dimensional (3D) printer and divided into four groups (n = 10) according to the fabrication method of metal frameworks used: HM (via hard milling), SM (via soft metal milling), L25 (via direct metal laser melting [DMLM] with a 25 ㎛ layer thickness), and L50 (via direct DMLM with a 50 ㎛ layer thickness). After the metal frameworks were fabricated and cemented, five vertical marginal discrepancy measurements were recorded in each site (i.e., buccal, facing the pontic, lingual, and facing away from the pontic) of both abutment teeth under a stereomicroscope (×40). Data were statistically analyzed at a significance level of 0.05. RESULTS. No statistically significant differences (P>.05) were found among the four axial sites of metal frameworks fabricated by sintering-based CAD/CAM techniques. The HM and L25 groups showed significantly (P<.001) lower marginal discrepancy values than the SM and L50 groups. CONCLUSION. Marginal discrepancy in the sites facing the pontic was not influenced by the type of sintering procedure. All fabrication methods exhibited clinically acceptable results in terms of marginal discrepancies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.151-159
• /
• 1993

In conjunction with a vertical network. horizontal geodetic control points provide the basic framework for topographic mapping and legal survey. The design of such networks as well as the technical means for obtaining their coordinates have been changed in time, and therefore Korea National Geographic Institute has planned and observed the precise geodetic network since 1975. The aim of this study is to investigate the systematic distortions of the precise geodetic network in Korea implementing by the simultaneous adjustment. The results show that there are large discrepancies between adjusted and public coordinates in Chun-nam and Kyung-buk areas. The coordinate discrepancies are mainly due to the non-rigorous adjustment method and the disregard of the orientation unknown of the first direction for some blocks.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.179-190
• /
• 2008

The purpose of this study was to identify whether or not in one-leg vertical jump of each limb asymmetry between both sides is present and to identify how the discrepancies between both limbs affect two-leg jumping performance, that is bilateral deficit. We had 13 healthy subjects perform one-leg jump for both sides and two-leg countermovement jump. The result of biomechanical analysis showed significantly difference of 4-7% in net impulses and work output between dominant and non-dominant one-leg jump and bilateral deficit of 24% when sum of those of each one-leg jump was compared with two-leg jump. But asymmetry in lower extremity was not significantly correlated with bilateral deficit. Two-leg jump could be characterized by relatively short propulsion time, long propulsion distance and high joint angular velocity compared with one-leg jump. These factors seemed to contribute to decreased performance in two-leg jump. Furthermore bilateral deficit was attributed to lower activities of extensor muscles found in two-leg jump.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.280-290
• /
• 2012

This study was performed to establish the lateral cephalometric standards of Korean children for diagnosis of antero-posterior and vertical discrepancies of maxillofacial region. The lateral cephalometric radiographs were taken from 100 Korean children with normal occlusion, and then 15 measurements were statistically analysed. The results of this study were as follows : 1. Maxillary length of males was significantly greater than that of females (p < 0.05). There was strong correlation between maxillary and mandibular length (r = 0.625(M), 0.574(F)). 2. Lower facial height of males was significantly greater than that of females (p < 0.05). Furthermore, there was strong correlation between total facial height and upper facial height (r = 0.405(M), 0.417(F)) and very strong correlation between total facial height and lower facial height (r = 0.763(M), 0.787(F)). 3. All measurements for dento-alveolar relation showed no statistically significant sex difference. Maxillary length showed strong correlation with mandibular plane - lower incisor (r = 0.474(M), 0.426(F)) and mandibular plane - lower molar (r = 0.488(M), 0.499(F)).