• Journal of Korean Clinical Health Science
• /
• v.1 no.1
• /
• pp.91-98
• /
• 2013

Purpose: The purpose is to study the effects of the vision training, as a non-surgically treated vision therapy, on the objective and the subjective symptoms of the patients with intermittent exotropia combined with vertical deviation. Method: For the boys at the age of eight with intermittent exotropia, who report a long-distance blurred vision, dazzling, and intermittent diplopia more than ten times a day, the vision training had been practiced for seven weeks. The objective and subjective symptoms have been examined after six months from the end of the training. Results: The objective and the subjective symptoms have been improved after the seven weeks training and the improvements lasted after six months from the end of the treatment. Conclusion: Non-surgical treatment for the patients with intermittent exotropia, including intermittent exotropia combined with vertical deviation like this case, should be considered as an auxiliary treatment and on the preferential basis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.2 no.2
• /
• pp.47-51
• /
• 1978

In order to improve the hitting rate in the shot of rifles, it is required that the analysis of exterior ballistics and the line of sight. One of the important factors influenced a marksman using a rifle obtained the zero-setting of a rifle at the horizontal range, is the deviation of the impact point from the aiming point when the shooting is performed in an inclined ranges. The deviation usually cccurs from the reaction force along the bore line, the characteristics of exterior ballistics, and the error of a shooting range judgement by the inclined range. This study is concerned with the problem of the vertical difference between the impact and aiming point in the inclined shooting ranges. The computing method to find the vertical difference is represented. This method is applied for and experimental rifle in three cases, (1) hofizontal shooting ranges, (2) upper inclined shooting ranges, and (3) lower inclined shooting ranges.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.594-606
• /
• 1996

This study was intended to perform the relationships between mandibualr lateral deviation in facial asymmetry patients and morphology of the cranial vault. In 30 patients(males 14, female 16) using submento-vertical cephalograms that were taken in the pre-operaticve state and posteroanterioir cephalograms that were taken in centric occlusion before, immediate and long term after surgery. 1. Mean mandibular deviation was about $-3.12^{\circ}$and mean of absolute measurement was about $2.50^{\circ}$on the submento-vertical cephalograms. 2. On the submento-vertical cephalograms, there was no significant difference between non-deviation and deviation side but it had tendency that deviation side was larger than non-deviation side on the frontal portion of cranium(Y10 to Y6) and deviation side was smaller than non-deviation on the temporal portion of cranium(Y5, Y-1 to Y-5). 3. Mean mandibular deviation was about $1.40^{\circ}$and mean of absolute measurement was about $3.95^{\circ}$on the posteroanterioir cephalograms. 4. There was statistical significance on the influence of surgical change(PT2A-PT1A) to the relapse(PTLA-PT2A)(p<0.05). The more increasing of the change, the more relapse on the posteroanterioir cephalograms. 5. There was no statistical significance on the influence of degree of mandibular deviation to morphology of the cranium on the submento-vertical cephalograms. But it had tendency that the more mandibular deviation, the larger the non-deviation side on the anterior cranium and deviation side on the posterior cranium(p>0.05). 6. There was statistical significance on the influence of the degree of mandibular deviation on the posteroanterioir cephalograms to the difference between non-deviation and deviation side. The more increasing of mandibular deviation, the larger the non-deviation side on the Y4 to Y-6(p<0.05). 7. There was no statistical significance on the influence of difference between non-deviation and deviation side to the relapse on the posteroanterioir cephalograms. But it had tendency that the more increasing of the differece between non-deviation and deviation side, the more increasing the relapse on temporal of cranium.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.129-134
• /
• 2007

The purpose of this study was to determine the variability of components of the vertical ground reaction force signal to seek the suitable number of attempt datum to be analyzed during running at 2m/s and 4m/s. For this study, six subjects (height mean:$174.5{\pm}4.4cm$, weight $671.5{\pm}116.4N.$, age:$25.0{\pm}yrs.$) were selected and asked to run at least 3 times each run condition randomly. FFT(fast Fourier transform) was used to analyze the frequency domain analysis of the vertical ground reaction forces signal and an accumulated PSD (power spectrum density) was calculated to reconstruct the certain signal. To examine the deviation of the vertical ground reaction between signals collected from an different number of attempt, variability of frequency, magnitude of passive peak, time up to the passive peak and maximum load rate were determined in a coefficient of variance. The variability analysis revealed that when analyze the vertical reaction force components at 2m/s speed running, which belongs to slow pace relatively, it would be good to calculate these components from signal of one attempt, but 4m/s speed running needs data collected from two attempts to decrease the deviation of signal between attempts. In summary, when analyzing the frequency and passive peak of the vertical reaction force signal during the fast run, it should be considered the number of attempt.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.535-542
• /
• 2000

The purpose of this study was to find the characteristics of the frontal natural head position(NHP) of patients with facial asymmetry, and to contribute to the diagnosis of facial asymmetry in the clinical examination of orthodontic patients. Twenty adult patients who had apparent facial asymmetry and no severe sagittal skeletal discrepancy were selected as the asymmetry group, and 21 young adults who had symmetric faces were selected as the symmetry group. Frontal cephalograms were obtained in the state of NHP using a pivot-mounted fluid level device. The degree of the menton deviation was defined as the angle between the line drawn through crista galli and anterior nasal spine and the line drawn through crista galli and menton. The following angles were measured and each of them was compared with the degree of the menton deviation one is the angle between the true vertical line and the supra-orbital line which is a tangent line to the extreme cranial point on the supra-orbital margin, and the other is the angle between the true vertical line and the cervical line drawn through the midpoint of atlas and the 4th cervical vertebra. Through the statistical analysis, following results were obtained. 1. The angle between the supra-orbital line and the true vertical line was much mote deviated from the right angle in the asymmetry group than in the symmetry group. 2. The angle between the cervical line and the true vertical line in the asymmetry group showed greater tendency than in the symmetry group, but the difference was not statistically significant. 3. In the asymmetry group, the degree of the menton deviation was positively correlated with the angle between the supraorbital line and the true vertical line. The above results suggest that racial asymmetry patients show the tendency to have the tilted NHP to compensate the deviation of menton position.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.1
• /
• pp.23-31
• /
• 1986

Meteorological Measurement was performed for evaluation of the horizontal vertical standard deviation $(\sigma_y, \sigma_z)$, surface roughness length and stmospheric stability during the period of March to October 1985 The major results are as follows; 1) The average value of surface roughness length was 144cm at NEPI. 2) In frequency distribution of atmospheric stability, neutral state (D class) was dominent in Seoul (29%) and Pusan (30%). Unstable states (A. B. C. class) were 26% in Seoul and 24% in Pusan. Also, stable states (D. E. F class) were 74% in Seoul and 76% in Pusan. 3) Standard deviations of horizontal ad vertical direction were evaluated as a function of downwind distance and atmospheric stability at NEPI, Jamsil and Pujeondong (Pusan). Standard deviation of horizontal direction was largest at NEPI among 3 areas because of mechanical turbulence resulting from difference of surface roughness length.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.144-158
• /
• 1998

In order to study basic information on the developed electro-magnetic compass, experiments were carried out on board M. S. KAYA at the pier of Dong Kuk Steel Mill in Pusan and the Korean southern sea using a three-axis magnetic sensor from Jan. 21, 1995 to Feb. 14, 1996. The obtained results were as follows : 1. The amount of old metal on the pier was about 27,290tons~57,440tons with an average of 40,560tons, the artificial local disturbance at the pier was min. 27.1$\mu$T, max. 66.5$\mu$T, ave. 433$\mu$T for the horizontal component and min. -27.0$\mu$T, max. 45.1$\mu$T, ave. 3.7$\mu$T for the vertical component. Its direction of horizontal component was 305$^{\circ}$ with the ship's head up bearing at 225$^{\circ}$. 2. The ship's magnetic distribution on the starboard side on berthing at the pier was 17.4$\mu$T for the horizontal component and -6.2$\mu$T for the vertical component. On the ship's port side, it was 19.8$\mu$T for the horizontal component and 4.1$\mu$T for the vertical component. On the ship's starboard side at sea, the ship's magnetic distribution was 19.2$\mu$T for the horizontal component and 3.2$\mu$T for the vertical component. On the ship's port side, the readings were 22.0$\mu$T for the horizontal component and -1.8$\mu$T for the vertical component. The directions of these readings were nearly starboard side. 3. On the pier, the secular change of the artificial local disturbance decreased 8.3$\mu$T from 61.0$\mu$T to 52.7$\mu$T for the horizontal component and decreased 7.1$\mu$T from 8.9$\mu$T M 1.8$\mu$T for the vertical component. On the starboard side from its berth, the ship, s magnetic distribution increased 2.6$\mu$T from 14.8$\mu$T to 17.4$\mu$T for the horizontal component and increased -0.1$\mu$T from -6.1$\mu$T to -6.2$\mu$T for the vertical component. On the ship's port side from its berth, it increased 7.1$\mu$T from 12.7$\mu$T to 19.8$\mu$T for the horizontal component and increased 10.2$\mu$T from -6.1$\mu$T to 4.1$\mu$T for the vertical component. 4. While at sea, on the ship's starboard side, the Secular change of the ship's magnetic distribution increased 3.9$\mu$T from 15.3$\mu$T to 19.2$\mu$T for the horizontal component and increased 2.0$\mu$T from -5.2$\mu$T to -3.2$\mu$T for the vertical component. On the port side, the changes increased 11.4$\mu$T from 10.6$\mu$T to 22.0$\mu$T for the horizontal component and increased 4.9$\mu$T from -6.7$\mu$T to -1.8$\mu$T for the vertical component. Upon berthing at the pier, the deviation of the secular change increased westerly 1 degree W~ 2.5$^{\circ}$ W from 3.5$^{\circ}$ W~ 5$^{\circ}$ W M 6W with the ship's head up bearing at 225$^{\circ}$. While at sea, these increased westerly 2$^{\circ}$ ~ 3$^{\circ}$ from the Northeast to the South and increased easterly 1$^{\circ}$ ~ 8$^{\circ}$ from the Southwest to the North. 5. While at port, within 1 mile between the ship and berth of the pier, as we approached the pier, the westerly deviation increased and when we departed the pier easterly deviation increased. When approaching the pier, the deviation was smaller than the deviation when the ship was departing from the pier. When approaching the bearing at 225$^{\circ}$ with the ship's head up bearing, the varies of deviation was smaller than the varies when the ship's head up bearing was departing from it.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.504-511
• /
• 2015

In this paper, the results of evaluating the passenger comfort due to the standard deviation of acceleration in vertical and lateral direction regarding the ship response in irregular wave by ordinary strip method in regular wave and energy spectrum using linear superposition theory in order to evaluate the motion of experimental ship are as follows. According to the results of ship response, it was possible to find that, in order to reduce the motion of ship, a ship operating in bow sea was more stable than in quartering sea. In the results of analyzing the standard deviation of acceleration in vertical direction according to each component wave pattern, when there was a wave length of 56m and an average wave period of 6 sec, most of cases showed the peak value. And among them, the standard deviation was 0.35 which was the highest in head sea. And in case of lateral direction, the maximum value was shown in a wave length of 100m and an average wave period of 8 sec. And it was 0.16 in beam sea and ${\chi}=150^{\circ}$. In the evaluation of passenger comfort due to standard acceleration in vertical and lateral direction, it was 80% in head and bow sea. On the other hand, it was shown to be 15% in follow sea. Accordingly, when the expected wave height in a sea area where a training ship was intended to operate was known, it was possible to predict the routing of ship. And altering her course could reduce the passenger comfort by approximately 50%.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.260-267
• /
• 2016

Background: This study analyzes the differences in the annual averaged atmospheric dispersion factor and ground deposition factor produced using two classification methods of atmospheric stability, which are based on a vertical temperature difference and the standard deviation of horizontal wind direction fluctuation. Materials and Methods: Daedeok and Wolsong nuclear sites were chosen for an assessment, and the meteorological data at 10 m were applied to the evaluation of atmospheric stability. The XOQDOQ software program was used to calculate atmospheric dispersion factors and ground deposition factors. The calculated distances were chosen at 400 m, 800 m, 1,200 m, 1,600 m, 2,400 m, and 3,200 m away from the radioactive material release points. Results and Discussion: All of the atmospheric dispersion factors generated using the atmospheric stability based on the vertical temperature difference were shown to be higher than those from the standard deviation of horizontal wind direction fluctuation. On the other hand, the ground deposition factors were shown to be same regardless of the classification method, as they were based on the graph obtained from empirical data presented in the Nuclear Regulatory Commission's Regulatory Guide 1.111, which is unrelated to the atmospheric stability for the ground level release. Conclusion: These results are based on the meteorological data collected over the course of one year at the specified sites; however, the classification method of atmospheric stability using the vertical temperature difference is expected to be more conservative.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.4
• /
• pp.337-345
• /
• 2011

Purpose: The purpose of this study was to define the relation of the degree of menton deviation and 3-D CT (computerized tomography) measurements of the glenoid fossa and the mandible, which are considered to have an influence on menton deviation. Methods: The CT images were obtained in 60 adults and these were transmitted to a computer and reconstructed using computer software. According to the degree of the menton deviation, which was measured on the posteroanterior cephalogram, the subjects were divided into the menton deviated group (30 adults) and the symmetry group (30 adults). A total of 11 measurements that might have an effect on menton deviation were determined and these were measured in the right and left sides using the function of 3-D measurement in the computer program. The 11 measurements consist of 6 measurements in the glenoid fossa (vertical position of the glenoid fossa and articular eminence, the sagittal position of the glenoid fossa and articular eminence, the depth of the glenoid fossa, and the anterior angle of the glenoid fossa), and 5 measurements in the mandible (ramus length, frontal ramal inclination, lateral ramal inclination, body length, body height). Results: The comparison of the differences between the menton deviated and symmetry groups and correlation analysis on the degree of menton deviation were carried out. The results of comparison of the right and the left difference between the menton deviated and symmetry groups showed that the vertical position and depth of the glenoid fossa were significantly increased in the menton deviated group. Conclusion: The results of the present study show that consideration of the shape and position of the glenoid fossa is necessary for making the diagnosis and administering proper treatment in facial asymmetry patients and especially growing patients.