• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.595-602
• /
• 2011

The long jump motion of 8 finalist of men's long jump of IAAF World Championships Daegu 2011 were analysed and the kinematic characteristics of the technique were investigated. The kinematic characteristics of long jump motion of 8 finalist were as follows. In the run-up phase, the average length of 3, 2, and 1 stride were $2.21{\pm}0.08$ m, $2.46{\pm}0.18$ m, and $2.19{\pm}0.16$ m, respectively. The change in the height of the center of gravity was $0.09{\pm}0.02$ m. The average velocity of 3, 2, and 1 stride was $10.37{\pm}0.32$ m/s, $9.63{\pm}0.32$ m/s, and $10.69{\pm}10.69$ m/s, respectively. In the take-off phase, the horizontal velocity, the vertical velocity, the reduction of horizontal velocity was $9.00{\pm}0.37$ m/s, $3.04{\pm}0.27$ m/s, and $1.69{\pm}0.34$ m/s, respectively. The minimum knee angle and the take off angle was $157{\pm}6.57^{\circ}$ and $18.5{\pm}2.24^{\circ}$, respectively. In the flight phase, the flight time and the maximum height of the center of gravity was $0.82{\pm}0.05$ s, and $1.70{\pm}0.10$ m, respectively. In the landing phase, the landing length was $0.51{\pm}0.06$ m. The body angle, the knee angle, and the hip angle was $71{\pm}20.93^{\circ}$, $136{\pm}19.19^{\circ}$, and $85{\pm}9.58^{\circ}$, respectively. The kinematic characteristics of long jump motion with good record were shown as follows. The reduction of the horizontal velocity in the take-off phase was minimized while the velocity of the run-up were maximally maintained. The vertical velocity in the take-off phase was increased with rapidly extended knee and the high center of gravity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1124-1129
• /
• 2021

The application area based on UAV (Unmanned Aerial Vehicle) is continuously increasing as time passing by. In particular the UAVs which consist of more than four horizontal propellers and the functionality of VTOL (Vertical Take-Off and Landing) are utilized in diverse platforms and the application products due to their safety and aerodynamically simpler design and architectures. The most UAV missions are controlled by GCSs (Ground Control System). The GCSs are generally connected to the internet and get electrical map and environmental information such as temperature, humidity, wind speed, wind direction and so on. In this paper, we design a system for UAV system to have capability of approaching to a certain ship and monitoring her efficiently by using AIS (Auto Identification System) information. Furthermore we verify that adapting AIS on GCS side is more efficient through experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.137-148
• /
• 2014

A multi-rotor is an autonomous flying robot with multiple rotors. Depending on the number of the rotors, multi-rotors are categorized as tri-, quad-, hexa-, and octo-rotor. Given their rapid maneuverability and vertical take-off and landing capabilities, multi-rotors can be used in various applications such as surveillance and reconnaissance in hostile urban areas surrounded by high-rise buildings. In this paper, the unified dynamic model of each tri-, quad-, hexa-, and octo-rotor are presented. Then, based on derived mathematical equations, the operation and control techniques of each multi-rotor are derived and analyzed. For verifying and validating the proposed models, operation and control technique simulations are carried out.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.788-797
• /
• 2023

In this paper, we introduced a test environment to test a vision-aided navigation system, as an alternative navigation system when global positioning system (GPS) is unavailable, for vertical take-off and landing (VTOL) unmanned aerial system. It is efficient to use a virtual environment to test and evaluate the vision-aided navigation system under development, but currently no suitable equipment has been developed in Korea. Thus, the proposed test environment is developed to evaluate the performance of the navigation system by generating input signal modeling and simulating operation environment of the system, and by monitoring output signal. This paper comprehensively describes research procedure from derivation of requirements specifications to hardware/software design according to the requirements, and production of the test environment. This test environment was used for evaluating the vision-aided navigation algorithm which we are developing, and conducting simulation based pre-flight tests.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.1019-1025
• /
• 2014

Recently, the studies of the Unmanned Aerial Vehicle(UAV) has been studied a variety from military aircraft to civilian aircraft and for general hobby activity aircraft. In particular, for small unmanned aircraft research for the ease of turning and hovering and Vertical-Off Take Landing(VTOL), have been studied mainly quadrotor unmanned aircraft is a type suitable for this study of small unmanned aircraft. The studies of these unmanned aircraft is the kinetic analysis requires complex processes, because these support by the aerodynamic forces on the unmanned aircraft study, and the controller design based on these dynamical analysis and experimental model analysis. In this paper, after the implementation of the basic attitude control based on a general PID controller, we propose concept design of the attitude control method on quadrotor attitude control by using the reinforcement learning algorithm of neural networks for non-linear elements not considered in the controller design.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.52-65
• /
• 2021

A large amount of time and cost is consumed due to congestions caused by an increasing number of cars which results in a lot of emissions. To overcome these problems, a new electric vertical takeoff and landing (eVTOL) aircraft is being considered. Since vertical take off and landing without a separate runway is realized and electricity is used as a power source, it could solve the saturated ground traffic congestions without emissions. In this paper, the initial sizing was performed based on the Nexus 6HX of Belltextron which is a tilt-ducted fan type. In this study, the electric propulsion system that only uses battery was implemented instead of current Nexus 6HX hybrid electric propulsion. Aerodynamic analyses were performed using OpenVSP and XFLR5. Power-to-weight ratio, wing loading, estimated weight were calculated with these analyses.

• Journal of Aerospace System Engineering
• /
• v.8 no.4
• /
• pp.1-6
• /
• 2014

This paper presents the trade-off study of conducting a survey of the weights for various kind of propulsion systems installed in the Smart Unmanned Aerial Vehicle TR-100, a tilt-rotor vehicle, which is developed by Korea Aerospace Research Institute, in order to predict the appropriate propulsion system for present and future Personal Air Vehicle, which has single mode and vertical take-off & landing. In order to perform the trade-off study, we set the requirements that the vehicle hovers for 1 hour with 1,000 kg maximum take off weights. In this study, the power systems are classified engine, which uses the fossil fuel - turboshaft engine, piston engine, diesel engine and rotary engine, and electric motor with fuelcell or Li-Ion battery. The results of trade-off study shows the power systems using fossil fuel are superior to using fuelcell or Li-Ion battery for weight of propulsion system. Also turboshaft engine is the best power system for the aspects of system weight, and the nexts are rotary engine, piston engine, diesel engine, electric motor with Li-Ion battery, and electric motor with fuelcell.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.131-140
• /
• 2011

The purpose of this study was to evaluate the kinematic characteristics of 5th hurdle clearance during the 100m hurdle final competition at the 2010 Colorful DaeGu pre-championship meeting. This study was also intended to provide the technical data for better performance for preparing the 2011 world championship. Lee and Jung need to change technical movement by reducing the distance of the take-off point from the hurdle and by decreasing the vertical velocity of the C.G.(center of gravity) at the takeoff. Powell's angle of the take-off leg showed bigger at the touchdown and smaller at the takeoff comparing to Lee's and Jung's. Furthermore, Powell's horizontal velocity of the C.G. was maintained at the takeoff and touchdown. So, Lee and Jung need to change angle of the take-off leg the same as Powell's. Both Lee and Jung need to increase the angle of landing leg at the touchdown. In addition to increasing the angle Jung needs to improve the knee and ankle velocity with the hurdling leg.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.603-610
• /
• 2011

The long jump motions of 8 finalists in the women's long jump at the IAAF World Championships, Daegu 2011 were analyzed, and the kinematic characteristics of their techniques were investigated. The kinematic characteristics of the long jump motion of the 8 finalists were as follows. In the run-up phase, the length of the 2 stride was $108{\pm}6.92%$ that of the 3 stride. The length of the 1 stride was $91{\pm}5.78%$ that of the 2 stride. The change in the height of the center of gravity was $0.07{\pm}0.03$ m. The maximum velocity during the run-up phase was $9.44{\pm}0.13$ m at the 1 stride. In the take-off phase, the horizontal velocity, vertical velocity, reduction in horizontal velocity were $7.80{\pm}0.15$ m/s, $2.96{\pm}0.14$ m/s, and $1.64{\pm}0.19$ m/s, respectively. The minimum knee angle and take-off angle were $151{\pm}8.89^{\circ}$ and $20.7{\pm}1.03^{\circ}$, respectively. In the flight phase, the flight time and maximum height of the center of gravity were $0.78{\pm}0.03$ s, and $1.60{\pm}0.05$ m, respectively. In the landing phase, the landing length was $0.50{\pm}0.07$ m. The trunk angle, knee angle, and hip angle were $74{\pm}18.75^{\circ}$, $131{\pm}10.45^{\circ}$, and $82{\pm}9.03^{\circ}$, respectively. The kinematic characteristics of the motion of a good long jump were as follows. The reduction in the horizontal velocity in the take-off phase was minimized, and the maximum velocity of the run-up was maintained. The vertical velocity in the take-off phase was increased using a rapidly extended knee and high center of gravity.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.51-56
• /
• 2005

This paper introduces an altitude determination algorithm using GPS/INS/Baroaltimeter and evaluates the algorithm by real field tests. The test results show that the proposed method can determine the altitude of an aircraft continuously and sensitively. Therefore, it is appropriate to be used as an altimeter for a flight control system, especially for the automatic take-off and landing. In addition, it is shown that the second and the third baro-inertial vertical channel damping methods are essentially complementary filters while the proposed scheme improves these complementary filters.