• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.155-159
• /
• 2016

Eddy current testing (ECT) is an important nondestructive testing technology for the inspection of flaws in conductive materials. However, this widely used technology is not suitable for inspecting lamination when a conventional pancake coil is used because the eddy current (EC) generated by the pancake coil is parallel to the lamination and will not be perturbed. A new method using a rectangular coil placed vertical to the work piece is proposed for lamination detection. The vertical sections of the rectangular coil induce ECs that are vertical to the lamination and can be perturbed by the lamination. A parametric study of a rectangular coil by finite element analysis was performed in order to examine the capability of generating vertical EC.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.147-154
• /
• 2001

Dynamic behavior of high speed train is very important because the high speed train should be safe and satisfied with the ride comfort. An eddy current brake system is mounted on trailer bogie and wheelset. The eddy current braking force longitudinally exerts on the articulated trailer bogie and the attraction force vertically exerts on the wheelset. Because a frame of eddy current brake system is flexible, these forces generate the vertical vibration at middle point of the frame. Also, the vibration change the vertical clearance between an electromagnet and top of rail which affect the magnitude of braking and attracting forces. Therefore, the dynamic behavior of the eddy current braking system must be predicted for design the dynamic characteristic of its mounting system when normally operate on rail which have irregularity. Vampire program is used for Prediction of the dynamic behavior of an eddy current braking system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.345-350
• /
• 2001

Dynamic behavior of high speed train is very important because the high speed train should be safe and satisfied with the ride comfort. An eddy current brake system is mounted on trailer bogie and wheelset. The eddy current braking force longitudinally exerts on the articulated trailer bogie and the attraction force vertically exerts on the wheelset. Because a frame of eddy current brake system is flexible, these forces generate the vertical vibration at middle point of the frame. Also, the vibration change the vertical clearance between an electromagnet and top of rail which affect the magnitude of braking and attracting forces. Therefore, the dynamic behavior of the eddy current braking system must be predicted for design the dynamic characteristic of its mounting system when normally operate on rail which have irregularity. Vampire program is used for prediction of the dynamic behavior of an eddy current braking system. Five design variables and five performance index are considered for optimization through D-optimal experimental design in this paper. Also model center is used to search the optimal point for sum of performance index with variational matric method.

• 한국해양학회지
• /
• 제29권2호
• /
• pp.119-131
• /
• 1994

모드분리기법의 gird-box형 3차원 수치모형을 이용하여 등밀도 등수심 유한영역에 서의 연직과점성 개수에 따른 취송유와 조류의 수평 유속 연직구조를 분석하였다. 연) 직과점성 계수가 수심에 일정할 경우 선영적으로 감소또는 증가하는 경우 이차함수 및 지수함수적으로 변하는 경우에 대한 해석해와의 비교를 통하여 모형 검증 및 연직유속 구조 분석이 실시되었다. 아울러 취송유에 경우 유속의 연직구조에 대한 해수표면 근 처에 "wall layer" 영향을 수치적으로 검토하였다. 모든 수직계산에서 연직층수는 열 세개로 가변 객자가 사용되었다. 수치모형은 유속의 연직구조를 만족스럽게 재연하게 으나 연직과점성 개수가 수심에 대하여 2차함수 및 지수적으로 감소하는 경우 해저면 부근에서 유속의 연직변화가 크게 나타나면서 해석해와 수치모형 결과간에 약간에 차 이가 나타났다. 수평 유속의 연직구조는 연직과점성 계수의 절대값 및 함수형태에 따 라 달라지며 해저면과 해수표면 부근의 유속은 wall layer 내의 연직과점성 계수에 민 감하게 반응하였다. 취송유에 경우에 해수표면에서의 연직 과점성 계수가 작을수록 강 한 shear가 표층에 형성되었으며 조류에 경우 연직 과점성 계수의 분포와 상관없이 해 저 한계층 상부의 유속은 거의 일정하게 나타나고 해조표내의 유속은 연직과점성 계수 가 줄어들수록 강한 shear 보였다.shear 보였다.

• 대한전기학회논문지
• /
• 제41권1호
• /
• pp.18-23
• /
• 1992

Magnet core and rail of a magnetically levitated vehicle are usually made of highly conductive materials. Accordingly, eddy currents are induced in those members. Eddy currents often lead to a decrement of levitation and guidance force. This paper has calculated the decrement of both forces due to eddy current generated by magnet's vertical and lateral motion. U-shaped electromagnet and rail were chosen as amodel of 2D finite element analysis. Calculated results proved that both forces dropped significantly at high speed. Consequently, effects of eddy current should be considered in designing the magnet and control system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1045-1047
• /
• 2003

The development of linear Eddy-Current brake systems has gradually gone beyond the adhesion limit in high-speed vehicles. In particular, the practicality of using permanent magnet in Eddy-Current brake systems is obviously recent, due to the manifold improvement in magnet materials and technology. On the basis of analytical two-dimensional field solution, this paper deals with flux density and force calculation about the linear Eddy-Current brake systems: DC excited electromagnet, Halbach magnetized and vertical magnetized permanent magnet.

• 한국수산과학회지
• /
• 제49권1호
• /
• pp.61-73
• /
• 2016

Water mass distribution and currents were investigated off the east coast of Korea near the Hupo Bank using the CTD and ADCP data from June to August 2010. The typical water masses were: (1) Tsushima Surface Water (TSW) from the East Korean Warm Current (EKWC) in the surface layer, (2) a shallow thermocline at 20-30 m depth, (3) Tsushima Middle Water (TMW) of high salinity (>34.2) below the pycnocline, (4) North Korean Cold Water (NKCW) of low salinity (<34.05) and low temperature (<4°C) in the lower layer. In June, a double eddy was observed in which a cold filament intruded cyclonically from the south around a pre-existing cold-core eddy. A burst of strong southward current was recorded in mid-August due to a warm filament from the meandering EKWC. Current in the N-S direction was predominant due to topographic effects, and the direction of the northward EKWC was frequently reversed in its direction due to the eddy-filament activity, whereas the influence of the wind was not noticeable. The vertical structure of the current was of a two-layer system, with the northward EKWC in the upper layer and weak southward flows corresponding to the North Korean Cold Current (NKCC) in the deeper layer.

• Ocean and Polar Research
• /
• 제31권4호
• /
• pp.283-296
• /
• 2009

Oceanographic survey data were analyzed to understand the characteristics of a warm eddy observed in the Ulleung Basin in July 2005. The temperature distribution at 200 db and vertical sections provided evidence of the warm eddy in the Ulleung Basin (UWE05). Based on the 5$^{\circ}C$ isothermal line on 200 db temperature, the major axis was 160 km from southwest to northeast, and the minor axis was 80 km from southeast to northwest. The homogeneous layer in the thermocline of UWE05 had mean values of 10.40$^{\circ}C$ potential temperature, 34.35 psu salinity, and 26.37 kg/m$^3$ potential density (${\sigma}_{\theta}$) and provided evidence that UWE05 also existed during the winter of 2004-2005. A warm streamer initially flowed along the circumference of UWE05 and mixed with the upper central water. Two northward current cores were found on the western side of the measured current section at the central latitude of UWE05. One was the East Korean Warm Current (EKWC) and the other was the main stream of the western part of UWE05. Geostrophic transport of the upper layer (from the surface to the isopycnal surface of 26.9 ${\sigma}_{\theta}$) was approximately 2.5 Sv in the eastern side of UWE05. However, the measured transport was twice as large as the geostrophic transport. Mass conservation of geostrophic transport was well satisfied in the upper layer. The direct current measurements and geostrophic transport analysis showed that the EKWC meandered around UWE05.

• 한국해안해양공학회지
• /
• 제8권1호
• /
• pp.28-36
• /
• 1996

조류와 취송류의 비선형 상호작용에 대한 연직확산계수의 영향을 점모형을 이용하여 살펴보았다. q$^2$-q$^2$1 난류모형을 난류운동에너지의 생성과 감쇄가 균형을 이룬다는 가정 하에 단순화한 0-방정식 난류모형을 도입하고 마찰수심의 영향을 적절히 반영하도록 수정하여 연직확산계수를 산정하였다. 0-방정식 난류모형의 유도과정과 전향력 항이 포함됨으로써 공진이 발생될 수 있음을 제시하였다. 왕복성 수면경사력과 바람응력이 복합된 경우, 고려된 바람응력에 의한 조류 진폭의 변화는 무시할만한 크기였으나, 왕복성 수면경사력만에 의해서는 발생되지 않았던 2배조의 조류 성분이 파생되었다. 취송류의 연직구조는 조류에 의한 배경난류가 지배적인지의 여부에 따라 상당한 차이를 보였다. 따라서 황해와 같이 강한 조류가 존재하는 해역의 취송순환을 파악함에 있어 조류에 의한 배경난류를 무시할 경우는 실제와는 상당히 다른 결과가 나타날 수 있다.

• 한국해안해양공학회지
• /
• 제6권3호
• /
• pp.205-215
• /
• 1994

난류모형을 도입하여 풍성류에 대한 3차원 수치모형을 수립하고, 풍성류 계산에 있어서 연직 와점성계수 산정방법들에 대한 비교평가를 수행하였다. 검토된 방법은 함수형(0-방정식), 1-방정식, 2개의 2-방정식 난류모형($ extsc{k}$-$\varepsilon$과 $textsc{k}$-ι)이며, 난류모형은 난류확산 특성길이의 연직분포에 대한 비교를 통하여 각 방법의 특징이 검토되었다. 양단이 막힌 수로와 순환수로에서 유속의 연직분포 계산결과를 수리실험자료와 비교검증하였다. 분석결과에 의하면 1-방정식 난류모형에 적합한 난류확산 특성길이 산정식은 포물선형이었으며, 2-방정식 난류모형($textsc{k}$-ι 모형과 $textsc{k}$-$\varepsilon$모형)은 대체로 실험치와 일치하는 경향을 보였다. 바람에 의한 영향이 전수심에 미치지 않는 경우에 가정된 연직 와점성계수의 분포는 바람이 영향을 미치는 수심까지만 적용되며, 영향이 없는 수심에서는 연직확산이 거의 일어나지 않아 적정성계수의 크기가 0에 가까웠다.