• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.322-329
• /
• 2003

We have studied how surface pretilt angle affects generation of disclination line in liquid-crystal-on silicon cells for 45$^{\circ}$-twisted nematic (TN) and vertical alignment (VA) modes with pixel size of 15$\mu\textrm{m}$. Our studies show that when the pretilt angle is increased from 0$^{\circ}$to 3$^{\circ}$ in the 45$^{\circ}$-TN cell, the disclination line at left side of on-pixel becomes weak and is well suppressed with $\theta$$\_$p/=3$^{\circ}$ although the pixel size Is decreased. In the VA cell, when the pretilt angle is decreased from 89$^{\circ}$ to 86$^{\circ}$, the disclination line at right side of the on-pixel is suppressed well and even for a smaller pixel size, it does not exist when $\theta$$\_$p/=86$^{\circ}$. The results inform that the pretilt angle strongly affects the image quality of microdisplays.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.36-37
• /
• 2006

Both negative and positive substrate bias effects on the structural properties and field-emission characteristics are investigated. carbon nanotubes (CNTs) are grown on Ni catalysts employing an inductively-coupled plasma chemical vapor deposition (ICP-CVD) method. Characterization using various techniques, such as field-emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Auger spectroscopy (AES), and Raman spectroscopy, shows that the physical dimension as well as the crystal quality of CNTs grown can be changed and controlled by the application of substrate bias during CNT growth. It is for the first time observed that the prevailing growth mechanism of CNTs, which is either due to tip-driven growth or based-on-catalyst growth, may be influenced by substrate biasing. It is also seen that negative biasing would be more effectively role in the vertical-alignment of CNTs compared to positive biasing. However, the CNTs grown under the positively bias condition display much better electron emission capabilities than those grown under negative bias or without bias. The reasons for all the measured data regarding the structural properties of CNTs are discussed to confirm the correlation with the observed field-emissive properties.

• 한국컴퓨터정보학회논문지
• /
• 제23권4호
• /
• pp.57-64
• /
• 2018

In this paper, we propose the automatic detection method for individual region separation using panorama image. Finding areas that contain individual teeth is one of the most important tasks in automating 3D models through individual tooth separation. In the conventional method, the maxillary and mandibular teeth regions are separated using a straight line or a specific CT slide, and the tooth regions are separated using a straight line in the vertical direction. In the conventional method, since the teeth are arranged in a curved shape, there is a problem that each tooth region is incorrectly detected in order to generate an accurate tooth region. This is a major obstacle to automating the creation of individual tooth models. In this study, we propose a method to find the correct tooth curve by using the jawbone curve which is very similar to the tooth curve in order to overcome the problem of finding the area containing the existing tooth. We have proposed a new method to accurately set individual tooth regions using the feature that individual teeth are arranged in a direction similar to the normal direction of the tooth alignment curve. In the proposed method, the maxillary and mandibular teeth can be more precisely separated than the conventional method, and the area including the individual teeth can be accurately set. Experiments using real dental CT images demonstrate the superiority of the proposed method.

• Journal of Information Display
• /
• 제6권4호
• /
• pp.45-48
• /
• 2005

By applying a critical field treatment instead of the conventional surface treatments such as soft rubber roller, ion beam irradiation, adhesive taping, and laser irradiation, electron emission properties of screen-printed carbon nanotubes (CNTs) were enhanced and investigated based on the emission current-voltage characteristics through scanning electron microscopy. After nanotube emitters were activated at the applied electric-field of 2.5 V/um, the electron emission current density with good uniform emission sites reached the value of 2.13 mA/$cm^2$ , which is 400 times higher than that of the untreated sample, and the turn-on voltage decreased markedly from 700 to 460 V. In addition, enhancement of the alignment of CNTs to the vertical direction was observed.

• 한국전기전자재료학회논문지
• /
• 제19권6호
• /
• pp.501-506
• /
• 2006

Carbon nanotubes (CNTs) were grown with a microwave plasma enhanced chemical vapor deposition (MPECVD) method, which has been regarded as one of the most promising candidates for the synthesis of CNTs due to the vertical alignment, the low temperature and the large area growth. MPECVD used methane ($CH_4$) and hydrogen ($H_2$) gas for the growth of CNTs. 10 nm thick Ni catalytic layer were deposited on the Ti coated Si substrate by RF magnetron sputtering method. In this work, the pretreatment was that the Ni catalytic layer in different microwave power (600, 700, and 800 W). After that, CNTs deposited on different pressures (8, 12, 16, and 24 Torr) and grown same microwave power (800 W). SEM (Scanning electron microscopy) images showed Ni catalytic layer diameter and density variations were dependent with their pretreatment conditions. Raman spectroscopy of CNTs shows that $I_D/I_G$ ratios and G-peak positions vary with pretreatment conditions.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.622-632
• /
• 2004

We have studied how liquid crystal's rubbing direction and voltage driving method affect generation of disclination line. At first, generation of disclination line in vertical alignment(VA) cell and VA-twisted nematic(TN) cell has been examined. When liquid crystal's rubbing direction of bottom substrate was 0$^{\circ}$, the degree of generated disclination line was the smallest value. Further, the generation of disclination line above the electrode is less in the frame inversion than in the line inversion. Secondly, we have examined a generation of disclination line in reflective fringe-field switching cell. When the distance between common electrodes is over 3 ${\mu}{\textrm}{m}$ with on-state of one pixel and off-state of neighboring pixels, the reflectance appears only on-state pixel without generating reflectance in adjacent pixels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.71-75
• /
• 2003

Carbon nanotubes(CNTs) are grown by using Co catalyst metal. CNTs fabricated by PECVD(plasma enhanced chemical vapor deposition) method are studied in terms of surface reaction and surface structure by TEM and Raman analysing method and are analysed in its electrical field emission characteristics with variation of space between anode and cathode. Acetylene($C_2H_2$) gas is used as the carbon source, while ammonia and hydrogen gas are used as catalyst and dilution gas. The CNTs grown by hydrogen($H_2$) gas plasma indicates better vertical alignment, lower temperature process and longer tip, compared to that grown by ammonia($NH_3$) gas plasma. The CNTs fabricated with Co(cobalt) catalyst metal and PECVD method show the multiwall structure in mid-circle type in tip-end and the inner vacancy of 10nm. Emission properties of CNTs indicate the turn-on field to be $2.6\;V/{\mu}m$. We suggest that CNTs can be possibly applied to the emitter tip of FEDs and high brightness flat lamp because of low temperature CNTs growth, low turn-on field.

• 한국항행학회논문지
• /
• 제8권2호
• /
• pp.91-97
• /
• 2004

본 논문은 수직 구조와 고성능 특성을 가진 InGaAsP 다중양자우물(MQW; Multiple Quantum Well) 비대칭 페브리페롯 변조기(AFPM; Asymmetric Fabry-Perot Modulators)에 관한 연구결과로써 광대역 동작특성과 저가격이 요구되는 피코셀과 같은 차세대 광대역 무선통신 시스템에 응용 가능성을 제안하고자 한다. 이 AFPM은 <-2V 동작전압과 광섬유와 간단히 결합되어 결합손실이 3dB 내외인 장점과 -3dB 주파수응답 특성이 10GHz인 특성을 보이므로 광대역 및 다중 무선서비스가 요구되는 시스템에 적용 가능할 것으로 기대된다. 이를 위한 간단한 링크실험 결과 92dB/Hz의 SFDR(Spurious Free Dynamic Range)과 약 40dB의 IMD(Inter-Modulation Distortion)의 결과를 보였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권12호
• /
• pp.529-540
• /
• 2021

This study proposes a model and attempts to illustrate the relationship between the frequency of dynamic capability utilization and marketing capabilities, and how market, technology, and competitor turbulence may affect these relationships. The findings suggest that in a highly turbulent environment, frequent use of sensing and integration capabilities may cause certain changes in the impact of marketing capabilities, and in a highly competitive environment, marketing capabilities are positively correlated with company performance. The sample consists of 212 enterprises of China with a three-year vertical data span. The partial least square program Smart-PLS was used for data analysis. The careful management of dynamic capabilities (i.e., relational, sensory, and inclusive) is required to address environmental conditions to achieve capacity alignment and ultimately enhance performance. Our findings demonstrate that relationship capabilities are valuable to the organization and might even help improve its sensing and integrating capabilities. In a highly competitive environment, marketing capabilities contribute the most to company performance. The more frequent the environmental turbulence, the higher the impact of integration capabilities on marketing capabilities. This situation necessitates the organization's usage of dynamic capabilities to modify its marketing approach effectively between stable and turbulent environments.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.81-86
• /
• 2019

Purpose: The purpose of the present study was to compare the internal fit of two different temporary restorations fabricated by dental CAD/CAM system and to evaluate clinical effectiveness. Methods: Composite resin tooth of the maxillary first molar was prepared as occlusal reduction(2.0mm), axial reduction(1mm offset), vertical angle(6 degree) and chamfer margin for a temporary crown and duplicated epoxy die was fabricated. The epoxy dies were used to fabricate provisional restorations by CAD/CAM milling technique or 3D-printing technique. The inner data from all crowns were superimposed on the master die file in the 'best-fit alignment' method using 3D analysis software. Statistical analysis was performed using a Wilcoxon's rank sum test for differences between groups. Results: It showed that the internal RMS(Root Mean Square) values of the additive group were significantly larger than those of other group. No significant differences in internal discrepancies were observed in the temporary crowns among the 2 groups with different manufacturing method. Conclusion: All the groups had the internal fit within the clinical acceptable range (< $50{\mu}m$). The continuous research in the future to be applied clinically for the adaptation of additive manufacturing technique are needed.