• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.202-209
• /
• 1996

In this paper, two dimensional vertical and comer infinite elements which can include multiple wave components to model underlying half space are developed. These elements are natural and economical to model underlying stiff half space or rock. To verify the behavior of these infinite elements, vertical, horizontal, and rocking compliances of a rigid strip foundation on a viscoelastic soil profile are analyzed and compared with those of Tzong and Penzien who used the boundary solution method. Good agreements are noticed between the two methods. The influence of material properties like Poisson's ratio, material damping, and stiffness ratio of layers as well as the influence of geometrical properties such as layer thicknesses and depth of foundation embedment are studied. Example analysis is carried out for the shaking table which is located in KIMM(Korea Institute of Machinery and Materials), and the vertical and horizontal displacements of the analysis are compared with the measured, and show good results and demonstrate the efficiency of the proposed method.

• 대한수학회보
• /
• 제60권5호
• /
• pp.1155-1179
• /
• 2023

Main objective of the present paper is to establish Chen inequalities for slant Riemannian submersions in contact geometry. In this manner, we give some examples for slant Riemannian submersions and also investigate some curvature relations between the total space, the base space and fibers. Moreover, we establish Chen-Ricci inequalities on the vertical and the horizontal distributions for slant Riemannian submersions from Sasakian space forms.

• 소음진동
• /
• 제8권6호
• /
• pp.1015-1022
• /
• 1998

This paper addresses the results of an experimental and analytical research of a helical coil spring subjected to dynamic behavior using space curve vector after considering elongation rate. Vibrations in helical coil spring can be divided into 3 modes such as vibrations of coil spring center axis' vertical direction. axis' horizontal direction, direction about center axis. However. these 3 modes are dependent one another and are characterized as coupled. The dependency was proved through both theoretically and experimentally analyzing the results of dynamic characteristics of coil spring center axis' vertical direction vibration by transfer matrix method using the governing equation of static equilibrium. Also this paper shows that pitch angle and active coils in coil spring affect the dynamic spring characteristics of the above 3 modes and are especially sensitive to the mode for vibration of axis' horizontal direction which most affects especially on dynamo stability of helical coil spring.

• 한국디지털건축인테리어학회논문집
• /
• 제9권3호
• /
• pp.77-83
• /
• 2009

Van Doesburg founded the magazine De Stijl with Mondrian in 1917. De Stijl movement was influenced by Cubist painting as well as by the mysticism and the ideas about ideal geometric forms in the neoplatonic philosophy. De Stijl proposed ultimate simplicity and abstraction by using only straight horizontal and vertical lines and rectangular forms. Furthermore, their formal vocabulary was limited to the primary colours, red, yellow, and blue, and the three primary values, black, white, and grey. The works avoided symmetry and attained aesthetic balance by the use of opposition. Vertical and horizontal lines are positioned in layers or planes that do not intersect, thereby allowing each element to exist independently and unobstructed by other elements In 1924 their different concepts about space and time were split between Van Doesburg and Mondrian. Van Doesburg launched a new concept for his art, Elementarism, which was characterized by the diagonal lines and rivaled with Mondrian's Neo-Plasticism. The works of De Stijl would influence the Bauhaus style and the international style of architecture.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2000년도 춘계학술대회
• /
• pp.21-21
• /
• 2000

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.337-341
• /
• 2010

In this paper, an extremely low voltage operated micro corner cube retroreflector (CCR) was fabricated for free-space optical communication applications by using bulk silicon micromachining technologies. The CCR was comprised of an orthogonal vertical mirror and a horizontal actuated mirror. For low voltage operation, the horizontal actuated mirror was designed with two PZT cantilever actuators, torsional bars, hinges, and a mirror plate with a size of $400{\mu}m{\times}400{\mu}m$. In particular, the torsional bars and hinges were carefully simulated and designed to secure the flatness of the mirror plate by using a finite element method (FEM) simulator. The measured tilting angle was approximately $2^{\circ}$ at the applied voltage of 5 V. An orthogonal vertical mirror with an extremely smooth surface texture was fabricated using KOH wet etching and a double-SOI (silicon-on-insulator) wafer with a (110) silicon wafer. The fabricated orthogonal vertical mirror was comprised of four pairs of two mutually orthogonal flat mirrors with $400{\mu}m4 (length) $\times400{\mu}m$ (height) $\times30{\mu}m$ (thickness). The cross angles and surface roughness of the orthogonal vertical mirror were orthogonal, almost $90^{\circ}$ and 3.523 nm rms, respectively. The proposed CCR was completed by combining the orthogonal vertical and horizontal actuated mirrors. Data transmission and modulation at a frequency of 10 Hz was successfully demonstrated using the fabricated CCR at a distance of approximately 50 cm.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.112-120
• /
• 2021

Recently, the number of consumers using digital online distribution platforms is increasing. This caused the rapid growth of the e-commerce market and increased delivery volume in urban areas. The logistics system, designed ar006Fund the city center to handle the delivery volume, operates a delivery system from the outskirts of the city to the urban area using cargo trucks. This maintains an ecosystem of high-cost and inefficient structures that increase social costs such as road traffic congestion and environmental problems. To solve this problem, research is being conducted worldwide to establish a high-efficiency urban joint logistics system using urban railway facilities and underground space infrastructure existing in existing cities. The joint logistics system begins with linking unmanned delivery automation services that link terminal delivery such as cargo classification and stacking, infrastructure construction that performs cargo transfer function by separating from passengers such as using cargo platform. To this end, it is necessary to apply the device to the vertical and horizontal transportation machine supporting the vertical transfer in the flat space of the joint logistics terminal, which is the base technology for transporting cargo using the transfer robot to the destination designated as a freight-only urban railway vehicle. Therefore, this paper aims to derive holistic viewpoints needs for design requirements for vertical and vertical transportation machines and freight transportation standard containers, which are underground railway logistics transport devices to be constructed by urban logistics ecosystem changes.

• 한국전산구조공학회논문집
• /
• 제20권1호
• /
• pp.39-50
• /
• 2007

본 논문은 다중 적층지반상의 지반-구조물 상호작용 해석을 위한 3차원 무한요소를 소개한다. 본 무한요소는 Cartesian 좌표계에서 정식화되었으며, 수평, 수평모서리, 수직, 수직 모서리 그리고 수평 수직 모서리 무한요소로서 총 5개의 무한요소로서 구성된다 적용한 형상함수 내부의 파동함수들은 적층지반의 파동문제를 효과적으로 모사하며 다중파동성분을 포함하고 있다. 본 요소의 성능을 검증하기 위하여 주파수영역에서 여러 가지 예제해석을 수행하였다. 균질 및 적층지반상 강체기초와 묻힌 케이슨 기초의 무차원 동적 거동(compliance & impedance)을 구하였으며, 기연구자들의 값과 비교 검토하였다.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.602-614
• /
• 1994

The purpose of this study was to suggest the proper ease of total crotch length concerning both appearance and comfort. The research processes as follows. 1) For the purpose of obtaining the necessary ease of slacks in body movement, experimental slacks of no ease of total crotch length were made. Three college girls putting on these experimental slacks were examined on their back middle waist lines using cross-cut method. 2) Experimental slacks for suggesting the proper ease consist of 7 types; slacks CO, Wl, W3, W5, W7, C3, C5. The sensory evaluation for appearance and comfort was applied to evaluate the 7 slacks. The results can be summarized as follows. 1. As the leg-movement angle increased, the vertical space increased and the horizontal space decreased. There was negative relationship between vertical and horizontal space. And as the leg.movement angle increased, the area of space increased. The shapes of space showed the amounts of space and the direction of force by the movements. 2. The appearances of slacks C3, W3, C5 were better than the other slacks. The eases of the crotch were better than those of the waist line in appearance. And slakcs W7 was better than any other , ;lacks in comfort. When the amount of each part of eases was same, the comfort in eases of crotch was not as good as that of waist line. 3. In slacks, the proper ease of total crotch length was 3% and 5% of total crotch length.

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.177-189
• /
• 2004

되메움되는 공간의 형상은 현장의 여건에 따라 수직 및 대칭 경사 또는 비대칭 경사를 포함하는 다양한 형태를 취할 수 있다. Kellogg(1993)는 대칭적으로 경사진 되메움 공간에서의 응력은 수직한 조건에서의 응력과는 다른 경계 조건이므로 이를 고려한 되메움 토압 이론식과 수평응력비를 제안하였다. Kellogg(1993)는 경사진 벽면에서 발생되는 응력을 되메움 흙의 단순한 내부마찰각으로 가정하였다. 이에 문(1997)은 경사진 벽면에서의 응력의 상태는 벽면마찰과 주응력의 회전방향에 따라 달라질 것을 예상하여 되메움 공간이 비대칭으로 형성되는 경우, 기존의 Kellogg(1993) 이론식에 대한 수정 Kellogg 이론식을 제안한 바 있다. 본 연구에서는 비대칭한 되메움 공간의 수평응력을 문(1997)의 수정 Kellogg 이론식에 기존 Kellogg(1993)의 수평응력비를 적용한 경우와 비대칭인 좌, 우측의 되메움 경사를 고려한 평균 수평응력비를 적용한 경우에 대하여 실내모형 토조실험과 수치해석으로 비구 검토하였다. 결과에 의하면 수정된 Kellogg 이론식에 Kellogg(1993)의 대칭한 조건에서의 수평응력비를 비대칭한 조건에 적용시킬 경우 경사진 벽면에서의 수평응력은 실험, 수치해석 결과에 매우 유사한 양상을 보이고 있으나 보다 수직한 벽면에서의 수평응력은 그 크기가 실험, 수치해석의 결과와는 상이한 결과를 보였다. 한편 비대칭 경사면 좌, 우측의 평균수평응력비를 수정 Kellogg 이론식에 적용하였을 경우에는 보다 수직한 면에서의 수평응력은 실험 및 수치해석 결과와 매우 유사한 결과를 나타냈다. 이러한 결과는 되메움 공간이 비대칭 조건을 형성하는 경우에는 좌, 우측 벽면 경사에 대한 평균 수평응력비의 적용이 고려되어져야 할 것으로 판단된다.