• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.68-73
• /
• 2008

In this paper, we propose watermark algorithm called TDWA(Time-Division Watermarking Algorithm) and we applied the proposed algorithm to H.264 video coding standard. We establish that a proposed algorithm is applied to H.264 baseline profile CODEC. The proposed algorithm inserts a watermark into the spatial domain of several frames. We can easily insert strong and invisible watermarks into original pictures using this method. For verification of the proposed algorithm we design hardware core using Verilog-HDL and Excalibur for JM 8.7 code with hardware & software co-simulation. As a result of verification, the PSNR between watermarked pictures and original pictures are more than 60dB and we found the watermark is kept more than 80% after encoding of H.264/AVC with quantization parameter of 28 in baseline profile.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1469-1472
• /
• 2019

CAN bus in automotive applications does not assign node addresses. When a node is hacked and it transmits malicious data frame, it is difficult to resolve which node is hacked. However, this CAN bus internal attack seriously threatens the safety of a car, so a prompt counterattack is necessary in the CAN bus physical layer. This paper proposes a counterattack method against malicious CAN bus internal attack. When a malicious data frame is detected, an intrusion detection system in the CAN bus increases the error counter of the malicious node. Then, the malicious node is off from the bus when its error counter exceeds its limit. A CAN controller with the proposed method is implemented in Verilog HDL, and the proposed method is proved to counterattack against malicious CAN bus internal attack.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.90-97
• /
• 2006

In this paper, we present a cost-effective architecture of high-speed soft-decision Viterbi decoder for Multi-band OFDM(MB-OFDM) systems. In the design of modem for MB-OFDM systems, a parallel processing architecture is general]y used for the reliable hardware implementation, because the systems should support a very high-speed data rate of at most 480Mbps. A Viterbi decoder also should be designed by using a parallel processing structure and support a very high-speed data rate. Therefore, we present a optimized hardware architecture for 4-way parallel processing Viterbi decoder in this paper. In order to optimize the hardware of Viterbi decoder, we compare and analyze various ACS architectures and find the optimal one among them with respect to hardware complexity and operating frequency The Viterbi decoder with a optimal hardware architecture is designed and verified by using Verilog HDL, and synthesized into gate-level circuits with TSMC 0.13um library. In the synthesis results, we find that the Viterbi decoder contains about 280K gates and works properly at the speed required in MB-OFDM systems.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.17-22
• /
• 2009

FlexRay is a new standard of network communication system which provides solutions to the degradation problems generated by many ECU (Electronic Control Unit) connections in automobiles and automation systems. The upper bound of the data rate is 10Mbps and it provides two channels for redundancy In this paper, FlexRay system is first designed using SDL. For hardware implementation, FlexRay system is designed using Verilog HDL based on the SDL design result. The designed system is synthesized using Synopsys Design Compiler with the Magna/Hynix 0.18 um cell library. In this paper, to construct a FlexRay network, active star is used since active star systems can provide high speed data transmission up to 10Mbps. The performance of the star network is tested using one transmitter node and two receiver nodes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.20-25
• /
• 2009

We propose hardware architecture of floating-point square root and inverse square root arithmetic units using lookup tables. They are used for lighting engines and shader processor for 3D graphic processing. The architecture is based on Taylor series expansion and consists of lookup tables and correction units so that the size of look-up tables are reduced. It can be applied to 32 bit floating point formats of IEEE-754 and reduced 24 bit floating point formats. The square root and inverse square root arithmetic units for 32 bit and 24 bit floating format number are designed as the proposed architecture. They can operation in a single cycle, and satisfy the precision of $10^{-5}$ required by OpenGL 1.x ES. They are designed using Verilog-HDL and the RTL codes are verified using an FPGA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.36-42
• /
• 2009

This paper proposes the high-performance pipeline architecture for modified Booth multipliers. The proposed multiplier circuits are based on modified Booth algorithm and pipeline architecture which are the most widely used techniques to accelerate the multiplication speed. In order to implement the optimally pipelined multipliers, many kinds of experiments have been conducted. The experimental results show that the speed improvement gain exceeds the area penalty and this trend is manifested as the number of pipeline stages increases. It is also important to insert the pipeline registers at the proper positions. We described the proposed modified Booth multiplier circuits in Verilog HDL and synthesized the gate-level circuits using 0.13um standard cell library. The resultant multiplier circuits show better performance than others. Since they operate at GHz ranges, they can be used in the application systems requiring extremely high performance such as optical communication systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.49-56
• /
• 2006

This paper describes the design and the verification of IEEE 802.15.4 LR-WPAN 2.4GHz Physical layer for Ubiquitous Sensor Network(USN). We designed the Carrier Frequency Offset(CFO) compensation satisfied the frequency tolerance of IEEE 802.15.4 LR-WPAN and the adaptive matched filter that re-setting of the threshold for the symbol synchronization of the various USN environment. The multiplications is reduced 1/16 by this method each other at i, q phases and has 0.5dB performance improvement in detection probability. Proposed baseband system is designed with verilog HDL and implemented using FPGA prototype board.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.67-75
• /
• 1999

In this paper, we present an ASIC(Application Specific Integrated Circuit) design of wavelet transform filter Wavelet transform is used in lots of application fields which include image compression, because it has an excellent energy compaction. The operation characteristic and performance of wavelet transform filter are analyzed by using verilog-HDL(Hardware Description Language). In this paper, the designed wavelet transform filter uses line memory to improve data processing rate. Generally, when it reads and writes data of DRAM by using Fast Page Mode, input and output processing is very fast in horizontal direction but substantially slow in vertical direction. The use of line memory solves this low speed processing problem. As a result, though the size of the chip is getting larger, processing time for an image frame becomes 4.66ms. Generally, since the limit of 1 frame processing time on the data of TV video is 33ms, so it is appropriate for TV video.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.45-53
• /
• 2015

Adaptive support-weight based algorithm can produce better disparity map compared to generic area-based algorithms and also can be implemented as a realtime system. In this paper, we propose a realtime system based on geodesic support-weight which performs better segmentation of objects in the window. The data scheduling is analyzed for efficient hardware design and better performance and the parallel architecture for weight update which takes the longest delay is proposed. The exponential function is efficiently designed using a simple step function by careful error analysis. The proposed architecture is designed with verilogHDL and synthesized using Donbu Hitek 0.18um standard cell library. The proposed system shows 2.22% of error rate and can run up to 260Mhz (25fps) operation frequency with 182K gates.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.369-372
• /
• 2003

This paper describes a design of OFDM (Orthogoanl Frequency Division Multiplexing) based wireless LAN system receiver, defined in IEEE 802.11a standards. Because OFDM system uses several orthogonal sequence sets, it ran avoid selective fading of fast data transfer problem when it is used with error correction code. But if the receiver is not synchronized, the orthogonal of between sub-ralliers will be destroyed and the data interruption will be generated. So it makes error property get worse very murk. For improving the noise error, we use the relationship of phasor between sub-carriers and make system synchronization using one tab equalizer. The designed OFDM block is described by Verilog HDL for the efficient and small size hardware. And we preform the functional verification and evaluation using the vector of standards.