• 제목/요약/키워드: Velocity response

검색결과 1,258건 처리시간 0.027초

Thermophysiological Responses to the Alternation of Exercise and Rest at $20^{\circ}C$ when Wearing Underwear made of Cotton or Wool

  • Park Shin-Jung;Chang Jee-Hye;Tokura Hiromi
    • International Journal of Human Ecology
    • /
    • 제6권2호
    • /
    • pp.1-9
    • /
    • 2005
  • The purpose of this study was to investigate the effects of two kinds of underwear material on subjects exercising and resting in an ambient temperature of $20^{\circ}C$, a relative humidity of 60% and an air velocity of 0.13m $see^{-1}$. Two kinds of underwear ensemble were tested, differing in their hygroscopic properties: 100% wool (W) with higher moisture regain and 100% cotton (C) with lower moisture regain. Five young females served as subjects. The experiments comprised two repeated periods of 15 min exercise on a treadmill with a speed of 6km $h^{-1}$ followed by 10 min rest. The main results were as follows: 1) Mean skin temperature was significantly higher in W than in C throughout the whole experimental period (p<0.05). 2) The temperature and humidity of the microclimate between the skin and underwear provided by the first layer of clothing was higher in W than in C (p<0.1 and p<0.05, for temperature and humidity, respectively). 3) Heart rate was significantly higher in W than in C (p<0.05). 4) Subjects felt warmer during the second exercise session when wearing wool rather than cotton (p<0.05), and they also reported more increased wetness during the second exercise and rest periods in W than in C (p<0.05). These results suggest that underwear made of wool with higher moisture regain might not act as effectively as cotton to transfer exercise-induced heat from the body to the surrounding air when light exercise is taken in a thermally-neutral environment.

저속으로 전복되는 선박사고의 선체 특성에 대한 해석적 연구 (An analytic study on the hull characteristics of ship accidents at low capsizing speeds)

  • 최순만
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권3호
    • /
    • pp.235-239
    • /
    • 2016
  • 복원력을 잃고 선박이 전복될 때의 횡경사 속도는 선체가 사고 상황에 대해 외부로 표현하는 고유 응답의 하나가 된다. 자유 횡요 시 횡운동은 횡관성모멘트와 GM 및 횡감쇠계수와 같은 선체계수에 의해 나타낼 수 있으나 선체가 저속으로 진행되는 전복의 경우에는 각가속 성분이 특히 작아지므로 특성 해석은 보다 용이해진다. 따라서 빠르게 진행되는 전복사고에 비해 저속 전복 사고는 선체 거동의 예측이 적절히 가능할 뿐 아니라 선박구조에 필요한 시간의 확보가 수월해지므로 선박의 구조전략 측면에서 저속 전복사고는 별도로 분류하여 대응할 필요가 있다. 이를 위해 본 연구에서는 선체의 자유 횡운동에 대한 선형미분방정식을 토대로 저속 전복 시 선체계수들이 전복속도에 미치는 영향을 관련된 함수들로 나타내었으며 횡운동 진폭감쇠비를 기준으로 횡감쇠계수 크기와 선체 특성을 분석하였다. 또한, 여기에서의 수식적 관계를 실제 선박의 제원에 적용함으로써 얻어지는 결과들을 통해 제시된 저속 전복 선박의 일반적 특성이 도시적으로 설명될 수 있음을 확인하였다.

Bridge Weigh-in-Motion 기법을 이용한 주행차량 중량추정에 관한 연구 (A Study on Weight Estimation of Moving Vehicles using Bridge Weigh-in-Motion Technique)

  • 오준석;박주영;김준경;박승희
    • 한국전산구조공학회논문집
    • /
    • 제28권1호
    • /
    • pp.29-37
    • /
    • 2015
  • 본 연구에서는 BWIM(Bridge Weigh-in-Motion) 시스템을 기반으로 주행차량의 총중량 및 축중량 추정을 수행하였다. BWIM 시스템의 개발을 위해 차량 주행시험은 필수적이지만 그 비용과 시간이 많이 소요되고, 다양한 차량 주행 조건의 적용이 어렵다. 따라서 차량 주행시험의 비용 및 시간적 문제점을 보완하고, 주행 조건에 따른 다양한 교량응답의 확보할 수 있는 수치 시뮬레이션이 현장실험과 병행되어야한다. 본 연구에서는 교량의 동적특성을 반영하는 수치 시뮬레이션을 수행하여 교량의 응답을 획득하고, 통행 차량의 중량을 산출하는 BWIM 시스템에 적용하여 총중량 및 축중량 추정을 수행하고 정밀해석모델기반 과적단속기술에 대하여 제안하였다.

Study on Following of Parmeter ${\alpha}$ of 2-DOF PID Controller Using Fuzzy Algorithm

  • Lee, Sang-Min;Cho, Yong-Sung;Park, Jong-Oh;Choo, Yeon-Gyu;Lim, Young-Do
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.307-311
    • /
    • 2003
  • 2-mass system is generally used as controller of the variable-speed to transfer electromotion power to mechanical load such as industrial robot, driving parts of electric vehicle, rolling machine system of steel plant and driving parts of elevator. In this case, PI controller is often used as a velocity controller because of simplicity of system. But PI control algorithm is not enough for obtaining the control characteristics required for this system. To solve this problem, 2-mass system based on the PID controller derives the optimum PID parameters by pole assignment and estimation of the ITAE performance index. In this case, the system have tenacious properties about disturbance, but it causes extreme overshoot and vibration because of rapidly output of controller in early transient response about desired value. And if speed control system is applied by 2-DOF parameter ${\alpha}$, a temporary value, we must induce most suitable parameter by complicate pole assignment and estimation of the ITAE performance index whenever ${\alpha}$ changes. In this paper, to solve this problem we suggest control algorithm to followed exactly value of ${\alpha}$ as 2-DOF parameter by using fuzzy algorithm . So, intelligence algorithm modeled by human knowledge, experience, teachability and judgment follow exact ${\alpha}$ value and it can compose the efficient 2-DOF PID controller to improve following performance, overshoot decrease.

  • PDF

바위갯지렁이 양식장 인접지역 계측 사례를 포함한 수중소음 피해인정기준에서 배경소음과의 차에 대한 문제점 (Study on the Acceptance Level for Damage due to Underwater Noise from the Case Study of Field Measurement at Marphysa sanguinea Farm)

  • 최태홍;김재웅;고진석
    • 화약ㆍ발파
    • /
    • 제35권1호
    • /
    • pp.34-42
    • /
    • 2017
  • 발파에 의한 소음 진동의 물리적 크기 이외에 영향을 미치는 대상의 응답조건, 주변 환경에 적응상태 및 주관적 감정, 정신적 상태 등에 따라 크게 좌우되는 특성을 가지고 있어 명확히 피해영향을 판단하는 것은 매우 어려운 일이다. 특히 어류의 피해영향에 대해서는 실험을 통한 연구자체도 어렵고, 적용할 수 있는 제시기준이 모호하여 정확한 평가방법은 물론 실제 소음 진동 노출정도의 예측에 많은 어려움이 있다. 국내의 경우 수중소음 피해인정 기준을 140 dB re $1{\mu}Pa$, 수중 배경음과의 차가 어류에 미치는 피해기준은 20 dB re $1{\mu}Pa$ 이상으로 규정하고 있으나, 이는 연속음에 대한 것으로서 충격음인 발파음에 대한 평가로서는 적합하지 않다. 이 연구에서는 시험발파를 통해 바위갯지렁이 양식장 주변에서 발파 시 진동속도와 수중소음의 관계를 예측해보았다. 그리고 수중소음 피해인정기준에서 배경소음과의 차에 대한 의견을 제시해 보고자 한다.

Nonlinear sloshing in rectangular tanks under forced excitation

  • Zhao, Dongya;Hu, Zhiqiang;Chen, Gang;Lim, Serena;Wang, Shuqi
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제10권5호
    • /
    • pp.545-565
    • /
    • 2018
  • A numerical code is developed based on potential flow theory to investigate nonlinear sloshing in rectangular Liquefied Natural Gas (LNG) tanks under forced excitation. Using this code, internal free-surface elevation and sloshing loads on liquid tanks can be obtained both in time domain and frequency domain. In the mathematical model, acceleration potential is solved in the calculation of pressure on tanks and the artificial damping model is adopted to account for energy dissipation during sloshing. The Boundary Element Method (BEM) is used to solve boundary value problems of both velocity potential and acceleration potential. Numerical calculation results are compared with published results to determine the efficiency and accuracy of the numerical code. Sloshing properties in partially filled rectangular and membrane tank under translational and rotational excitations are investigated. It is found that sloshing under horizontal and rotational excitations share similar properties. The first resonant mode and excitation frequency are the dominant response frequencies. Resonant sloshing will be excited when vertical excitation lies in the instability region. For liquid tank under rotational excitation, sloshing responses including amplitude and phase are sensitive to the location of the center of rotation. Moreover, experimental tests were conducted to analyze viscous effects on sloshing and to validate the feasibility of artificial damping models. The results show that the artificial damping model with modifying wall boundary conditions has better applicability in simulating sloshing under different fill levels and excitations.

다양한 시험법으로 규명된 암반 탄성계수 비교 (Comparison of Rock Young's Moduli Determined from Various Measurement Methods)

  • 유근환;장찬동
    • 지질공학
    • /
    • 제16권1호
    • /
    • pp.1-14
    • /
    • 2006
  • 국내의 대표적 암종이라 할 수 있는 화강암체와 편마암체에 대해 탄성계수 측정 방법으로 자주 이용되고 있는 Goodman jack시험, PS검층, 초음파 속도측정, 일축압축 변형 시험을 실시하여 각 탄성계수를 측정하고 그 특징을 알아보았다. 실내에서 측정 된 동.정탄성계수는 측정시 가해진 응력의 크기, 측정시 이용된 주파수의 범위, 가압/감압 등의 측정 조건에 따라 상당히 다른 결과를 보였다. 실내 측정조건이 현장조건에 가까워질수록 현장암반의 탄성 계수와 비슷한 값으로 측정되는데 이는 실내시험시 현장 상태를 구현하는 것이 중요하다는 점을 시사한다. 동탄성계수는 정탄성계수에 비해 대체로 높게 측정되었으며 그 원인으로는 (미세)균열의 응력에 따른 거동양상, 측정시 이용한 주파수의 범위 차이, 그리고 변형 진폭의 차이 등의 효과로 설명 할 수 있다. 다양한 방법으로 측정된 각 탄성 계수 상호간의 관계 및 특징은 현장 암반 탄성계수의 적절한 판단을 위해 도움이 될 것으로 기대된다.

SUNSHINE, EARTHSHINE AND CLIMATE CHANGE I. ORIGIN OF, AND LIMITS ON SOLAR VARIABILITY

  • GOODE PHILIP R.;DZIEMBOWSKI W. A.
    • 천문학회지
    • /
    • 제36권spc1호
    • /
    • pp.75-81
    • /
    • 2003
  • Changes in the earth's climate depend on changes in the net sunlight reaching us. The net depends on the sun's output and earth's reflectance, or albedo. Here we develop the limits on the changes in the sun's output in historical times based on the physics of the origin of solar cycle changes. Many have suggested that the sun's output could have been $0.5\%$ less during the Maunder minimum, whereas the variation over the solar cycle is only about $0.1\%$. The frequencies of solar oscillations (f- and p-modes) evolve through the solar cycle, and provide the most exact measure of the cycle-dependent changes in the sun. But precisely what are they probing? The changes in the sun's output, structure and oscillation frequencies are driven by some combination of changes in the magnetic field, thermal structure and velocity field. It has been unclear what is the precise combination of the three. One way or another, this thorny issue rests on an understanding of the response of the solar structure to increased magnetic field, but this is complicated. Thus, we do not understand the origin of the sun's irradiance increase with increasing magnetic activity. Until recently, it seemed that an unphysically large magnetic field change was required to account for the frequency evolution during the cycle. However, the problem seems to have been solved (Dziembowski, Goode & Schou 2001) using f-mode data on size variations of the sun. From this and the work of Dziembowski & Goode (2003), we suggest that in historical times the sun couldn't be much dimmer than it is at activity minimum.

충격하중(衝擊荷重)과 하악골(下顎骨) 골절발생(骨折發生) 기전(機轉)의 유한요소법적(有限要素法的) 연구(硏究) (DYNAMIC 3-DIMENSIONAL FINITE ELEMENT ANALYSIS OF MANDIBULAR FRACTURE MECHANISM)

  • 오승환;김여갑
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제18권3호
    • /
    • pp.470-487
    • /
    • 1996
  • The purpose of this study was to investigate the dynamic response of the mandible to impact and provide insight into the fracture mechanism of the mandible, by 3-dimensional finite element method. The finite element model of the mandible was developed and calculated using NASTRAN/XL (MSC co. U.S.A.) and the linear dynamic transient analysis was performed according to the impulsive force direction, force type and impulse time to the mandible. At first, the load was applied on the mandibular symphysis, body, angle and subcondylar area in the horizontal mandibular plane and the computed stress-time histories at 14 locations of the mandible were obtained. Secondly, the impulsive force was directed to the symphyseal area with changing the force magnitude and impulse time, and calculated the node displacement at 8 locations of mandible. The conclusions from from this study were as follows. 1. The appearance of impulsive energy transmission was different to the direction of impulse to the mandible. 2. The impulsive stress and deformation were larger in lingual or medial side than buccal or lateral in the mandible. 3. The velocity, appearance of energy transmission and the fracture pattern in mandible were affected rather impulse time than force. 4. The horizontal impact to the one side of mandible did not have effect on the stress and displacement of contralateral mandible. From the above results, fracture pattern in symphysis can be showed as simple or comminuted, multiple or associated in body and angle and solitary in subcondyle area.

  • PDF

Colonization and community changes in benthic macroinvertebrates in Cheonggye Stream, a restored downtown stream in Seoul, Korea

  • Shin, Il-Kwon;Yi, Hoon-Bok;Bae, Yeon-Jae
    • Journal of Ecology and Environment
    • /
    • 제34권2호
    • /
    • pp.175-191
    • /
    • 2011
  • Colonization patterns and community changes in benthic macroinvertebrates in the Cheonggye Stream, a functionally restored stream in downtown Seoul, Korea, were studied from November 2005 to November 2007. Benthic macroinvertebrates were quantitatively sampled 15 times from five sites in the stream section. Taxa richness (59 species in total) increased gradually over the first year, whereas the density revealed seasonal differences with significantly lower values in the winter season and after flood events. The benthic macroinvertebrate fauna may have drifted from the upstream reaches during floods and from the Han River, arrived aerially, or hitchhiked on artificially planted aquatic plants. Oligochaeta, Chironommidae, Psychodidae, and Hydropsychidae were identified as major community structure contributors in the stream. Swimmers and clingers colonized relatively earlier in the upper and middle reaches, whereas burrowers dominated particularly in the lower reaches. Collector-gatherers colonized at a relatively early period throughout the stream reaches, and collector-filterers, such as the net-spinning caddisfly (Cheumatopyche brevilineata), predominated in the upper and middle reaches after a 1-year time period. Cluster analyses and multi-response permutation procedures demonstrated that the Cheonggye Stream shares more similarities with the Jungnang Stream than with the Gapyeong Stream. Detrended correspondence analysis and nonmetric multidimensional scaling demonstrated that physical environmental factors (depth, current velocity, dissolved oxygen, and pH) as well as nutrients (total nitrogen and total phosphorous), water temperature, and conductivity could affect the distribution of benthic macroinvertebrates in the study streams.