• 한국가시화정보학회지
• /
• 제4권1호
• /
• pp.41-46
• /
• 2006

In this study, one-way fluid structure interaction analysis(FSI) on wind turbine blade was performed. Both a quantitative fluid analysis on 3-bladed wind turbine and a structural analysis using the surface pressure data resulting from fluid analysis were carried out. Streamlines and angle of attack was easily acquired from analysis results, we showed the inlet velocity that the stall begins to occur. In the structural analysis, structural displacement and maximum stress of the two comparative models was calculated. The location that has maximum stress was found. The pressure difference between back and front part of the blade increases as the inlet velocity increase. The torque and maximum with regard to inlet velocity was also presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2829-2832
• /
• 2007

In this study, one-way fluid structure interaction analysis(FSI) on wind turbine blade was performed. Both a quantitative fluid analysis on 3-bladed wind turbine and a structural analysis using the surface pressure data resulting from fluid analysis were carried out. Streamlines and angle of attack was easily acquired from analysis results, we showed the inlet velocity that the stall begins to occur. In the structural analysis, structural displacement and maximum stress of the two comparative models was calculated. The location that has maximum stress was found. The pressure difference between back and front part of the blade increases as the inlet velocity increase. The torque and maximum with regard to inlet velocity was also presented.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.141-144
• /
• 2006

In this study, one-way fluid structure interaction analysis(FSI) on wind turbine blade was performed. Both a quantitative fluid analysis on 3-bladed wind turbine and a structural analysis using the surface pressure data resulting from fluid analysis were carried out. Streamlines and angle of attack was easily acquired from analysis results, we showed the inlet velocity that the stall begins to occur. In the structural analysis, structural displacement and maximum stress of the two comparative models was calculated. The location that has maximum stress was found. The pressure difference between back and front part of the blade increases as the inlet velocity increase. The torque and maximum with regard to inlet velocity was also presented.

• 농업과학연구
• /
• 제25권2호
• /
• pp.260-270
• /
• 1998

본 연구는 합리적인 침하계측관리의 수립을 위하여 현재 시공중인 사업부지를 선정하여 연약지반에 성토시 안정성에 미치는 영향을 현장계측결과를 기초로 기존의 안정평가 방법등과 비교분석하여 성토에 따른 지반의 복합적인 거동을 구명하고 연약지반의 안정평가 기법을 제시하고자 한 것으로 연구결과를 요약하면 다음과 같다. 1. 물리적 성질이 심도별로 최대치를 나타내며 변곡점이 형성되는 부분에서 수평변위가 급증하여 위험가능성이 있으므로 안정관리분석시 기초자료로 이용할 수 있고, 수평변위량의 차가 가장 큰 부분에서 전단변형이 발생되었다. 2. 단계성토에 따른 계측자료를 이용하여 성토체의 안정성을 비교분석 한 결과, 파괴기준선을 초과하여 위험치에 접근하는 부분도 있었으나 성토체는 안정한 것으로 확인되어 안정관리상 파괴기준선으로 안정성을 판단하는 것보다는 곡선의 기울기로 판단하는 것이 합리적이라고 판단된다. 3. 처리지반에서의 수평변위와 상대침하량은 거의 같은 비율을 유지하면서 증가하며, 무처리 지반에서 Terzaghi 수정지지력을 사용할 경우의 전단변형은 성토하중과 비배수 전단강도와의 관계를 고려하고 안전율은 1.2보다 큰 값을 사용하여야 할 것으로 판단된다. 4. 과잉간극수압은 성토시공높이에 따라 상승되고 방치기간에 따라서 감소되며, 성토높이가 관리기준치를 초과하면 과잉간극수압은 급격하게 증가되어 불안정한 상태가 되고 과잉간극수압과 수평변위량의 움직임은 거의 일치하고 있으므로 성토의 시공속도를 조절하는데 판단기준으로 이용할 수 있다.

• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.485-498
• /
• 2022

In near-fault earthquake prone areas, the velocity pulse-like seismic waves often results in excessive horizontal displacement for structures, which may result in severe structural failure during large or near-fault earthquakes. The recently developed isolator-gap damper (IGD) systems provide a solution for the large horizontal displacement of long period base-isolated structures. However, the hysteresis characteristics of the IGD system are significantly different from the traditional hysteretic behavior. At present, the hysteretic behavior is difficult to be reflected in the structural analysis and performance evaluation especially under random earthquake excitations for lacking of effective analysis models which prevent the application of this kind of IGD system. In this paper, we propose a mathematical hysteretic model for the IGD system that presents its nonlinear hysteretic characteristics. The equivalent linearization is conducted on this nonlinear model, which requires the variances of the IGD responses. The covariance matrix for the responses of the structure and the IGD system is obtained for random earthquake excitations represented by the Kanai-Tajimi spectrum by solving the Lyapunov equation. The responses obtained by the equivalent linearization are verified in comparison with the nonlinear responses by the Monte Carlo simulation (MCS) analysis for random earthquake excitations.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.81-98
• /
• 2003

The purpose of this study is to closely examine kinematic characteristics by jump phase of Li Xiaopeng motion in horse vaulting and provide the training data. In doing so, as a result of analyzing kinematic variables through 3-dimensional cinematographic using the high-speed video camera to Li Xiaopeng motion first performed at the men's vault competition at the 14th Busan Asian Games, the following conclusion was obtained. 1. It was indicated that at the post-flight, the increase of flight time and height and twisting rotational velocity has a decisive effect on the increase of twist displacement. And Li Xiaopeng motion showed longer flight time and higher flight height than Ropez motion with the same twist displacement of entire movement. Also the rotational displacement of the trunk at peak of COG was much short of $360^{\circ}$(one rotation) but twist displacement showed $606^{\circ}$. Likewise, Li Xiaopeng motion was indicated to concentrate on twist movement in the early flight. 2. It was indicated that at the landing, Li Xiaopeng motion gets the hip to move back, the trunk to stand up and the horizontal velocity of COG to slow down. This is thought to be the performance of sufficient landing, resulting from large security of rotational displacement of airborne and twist displacement. 3. It was indicated that at the board contact, Li Xiaopeng motion made a rapid rotation uprighting the trunk to recover slowing velocity caused by jumping with the horse in the back, and has already twisted the trunk nearly close to $40^{\circ}$ at board contact. Under the premise that elasticity is generated without the change of the feet contacting the board, it will give an aid to the rotation and twist of pre-flight. Thus, in the round-oH phase, the tap of waist according to the fraction and extension of hip joint and arm push is thought to be very important. 4. It was indicated that at the pre-flight, Li Xiaopeng motion showed bigger movement than the techniques of precedented studies rushing to the horse, and overcomes the concern of relatively low power of jump through the rapid rotation of the trunk. Li Xiaopeng motion secured much twist distance, increased rotational distance with the trunk bent forward, resulting in the effect of rushing to the horse. 5. At horse contact, Li Xiaopeng motion makes a short-time contact, and maintains horse take-off angle close to vertical, contributing to the increase of post-flight time and height. This is thought to be resulted from rapid move toward movement direction along with the rotational velocity of trunk rapidly earned prior to horse contact, and little shave of rotation axis according to twist motion because of effective twist in the same direction.

• 자원환경지질
• /
• 제27권3호
• /
• pp.281-287
• /
• 1994

이 논문은 transverse 이방성(異方性) 매질내 Love 채널파동 수치해석에 관한 연구를 요약한 것이다. 먼저, 이를 위하여 상기한 매질내 SH파동방정식으로부터 2차 근사 양(陽)유한차분식을 유도하였다. 이 유한차분식은 매 격자점마다 상이한 물성을 정해줄 수 있기 때문에, 복잡한 모델구조를 추가로, 내부 경계조건 처리를 함이 없이, 매우 효율적으로 해석할 수 있을 것이다. 등방성(等方性) 석탄층에 대한 해석결과, 본 연구에서 작성한 탄성파기록이 기존의 Korn and $St{\ddot{o}}ckl$의 것과 본질적으로 동일함을 확인하였다. 다음, 이방성(異方性) 석탄층에 대한 해석에서는, Love 채널파동의 군(群)속도가 석탄층의 수평방향 속도의 증감에 따라 증감됨을 알 수 있었다. 그러나 현재의 연구단계에선, Love 채널파동을 이용하여 저(低) 속도층의 조성(組成), 층서(層序), 균열등에 관한 정보를 이끌어 낼 수는 없었다. 이러한 정보는 석유탐사 및 개발의 측면에서 중요하기 때문에, 앞으로 이와 관련된 채널파동 연구가 기대된다.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.17-25
• /
• 2020

Objective: The purpose of this study is to provide a better understanding of long turn mechanism by describing long turns after kinematic analysis and provide skiers and winter sports instructors with data through which they are able to analyze right postures for turns in skiing in a systematic, rational and scientific manner. Method: For this, a mean difference of kinematic variables (the center of gravity (CG) displacement of distance, trajectory, velocity, angle) was verified against a total of 12 skiers (skilled and unskilled, 6 persons each), regarding motions from the up-start to down-end points for long turns. Results: First, concerning the horizontal displacement of CG during a turn in skiing, skilled skiers were positioned on the right side at the upstart and edge-change points at a long turn. There was no difference in anteroposterior and vertical displacements. Second, in terms of CG-trajectory differences, skilled skiers revealed a significant difference during a long turn. Third, regarding skiing velocity, skilled skiers were fast at the edge-change and maximum inclination points in long turns. Fourth, there was no difference in a hip joint in terms of a lower limb joint angle. In a knee joint, a large angle was found at the up-start point among skilled skiers when they made a long turn. Conclusion: In overall, when skilled and unskilled skiers were compared, to make a good turn, it is required to turn according to the radius of turn by reducing weight, concerning the CG displacement. Regarding the CG-trajectory differences, the edge angle should be adjusted via proper inclination angulation. In addition, a skier should be more leaned toward the inside of a turn when they make a long turn. In terms of skiing velocity, it is needed to reduce friction on snow through the edging and pivoting of the radius or turn according to curvature and controlling ski pressure. Regarding a lower limb joint angle, it is important to make an up move by increasing ankle and knee angles instead of keeping the upper body straight during an up motion.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.41-49
• /
• 2007

This study was to investigate the kinematical analysis using ski simulator. Twelve people(six skilled, six unskilled) participated in the experiment. Each phase of motion time was slight differences between the skilled group and the unskilled group but not significant difference in statistics. In displacement of vertical on COG(Center of Gravity), left and right down motion showed significant difference between group. In velocity of horizontal on COG, both left and right down motion showed significant difference between group, and up motion of between down motion showed significant difference. In displacement of angle on ankle, knee, hip joint almost showed significant difference between group. Almost in body position was lower skilled group than unskilled group.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.23-28
• /
• 1985

In this paper, the the duration of horizontall saccadic eye movement is studied alls measurement system is designed using microprocessor to obtain the quantitized data The duration is measured using the beginning and ending points of the saccadic velocity threshold. The results obtained are as follows. 1. The average duration of the saccade for angle displacement of 0$^{\circ}$ to 20$^{\circ}$ lies between 25 and 60 msec, and represents the increasing curve except 9$^{\circ}$ and 12$^{\circ}$ 2. The average duration lfor angle displacement of 5$^{\circ}$,10$^{\circ}$,15$^{\circ}$, and 20$^{\circ}$ is 40, 48, 57.5, and 62 msec, respectively. 3. Nasal movement has a little longer duration than temporeal movement. 4. The duration is not concerned with subject's will.