• 한국환경과학회지
• /
• 제6권1호
• /
• pp.25-31
• /
• 1997

The variations of gas hold-up, overall volumetric oxygen mass transfer coefficients and liquid circulation velocity in an internal loop reactor were investigated to manifest scale-up effect. The relationship between superficial gas velocity and gas hold-up were found as Ugr = 0.045 $\varepsilon$r in the pilot-scale and Ugr = 0.056 $\varepsilon$r in the bench-scale reactor. The overall volumetric oxygen mass tractsfer coefficient, KLa was slightly increased in the pilot-scale than in the bench-scale reactor. Flow regime was changed from the bubble flow to the churn-turbulent flow when the superficial gas velocity reached to 3.5 - 4 cm/sec in the pilot-scale.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.268-273
• /
• 1991

Missile and target closing velocity is used in the proportional navigation(PN) missile guidance loop. But it is difficult to estimate the closing velocity when passive seeker is used and only the Line-of-Sight(LOS) rate is available in the guidance loop. In this study, new closing velocity estimation method is developed. This method uses LOS rate measurement only and uses some characteristics of PN guidance law. The Lyapunov method is used to analyze the stability of the developed estimation method.

• 반도체디스플레이기술학회지
• /
• 제11권3호
• /
• pp.13-18
• /
• 2012

This paper presents a velocity disturbance estimation system for the stable fine seek control using a genetic algorithm. To estimate accurately the velocity disturbance in spite of the uncertainties of fine actuator, the system utilizes an objective function to minimize the differences of the frequency characteristics between the nominal velocity control loop and the extremal velocity control loops. The objective function is considered by applying a genetic algorithm and the velocity disturbance is estimated by the measurable velocity, the adjusted velocity controller, and the fine actuator model. The proposed velocity disturbance estimation system is applied to the fine seek control system of a DVD recording device and is evaluated through the experimental results.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.871-877
• /
• 2018

In this paper, we propose a triple nested PID control scheme for stable hovering of a quadrotor and propose a complementary filter based sensor fusion technique to improve the performance of attitude, altitude and velocity measurement. The triple nested controller has a structure in which a double nested attitude controller that has the angular velocity PD controller in inner loop and the angular PI controller in outer loop, is nested in a velocity control loop to enable stable hovering even in the case of disturbance. We also propose a sensor fusion technique by applying a complementary filter in order to reduce the noise and drift error included in the acceleration and gyro sensor and to measure the velocity by fusing image, gyro, and acceleration sensor. In order to verity the performance, we applied the proposed control and measurement scheme to hovering control of quadrotor.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.59-64
• /
• 1989

In this paper, the launch trajectory of the Japan scientific satellite M-3H-3 from launch to orbit injection is investigated. For the terminal conditions at a guidance target point, a guidance and control system is used. An open-loop and a closed-loop guidance schemes are used simultaneously. For the closed-loop guidance scheme, the velocity polynomial algorithm represented by the velocity difference between the target point and present velocity is used. A PD control system is used for activating gimbal type engines. The simulation result shows that all the terminal position and velocity conditions are satisfied and the trajectory for the M-3H-3 scientific satellite is reasonable.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.134-137
• /
• 2002

This paper presents a robot manipulator kinematic motion control scheme based on velocity feedback loop. The desired joint velocity is obtained by the feature-based visual servoing and is used in the joint velocity control loop system for trajectory control of the robot manipulator. The asymptotic stability of the closed loop system is shown by the Lyapunov method. Effectiveness of the proposed method is shown by simulation and experimental results on a robot manipulator with two degree of freedom.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.31-36
• /
• 2007

Effect of coulomb friction and backlash on the single loop position control has been studied for the precision position control. We have showed the limit cycle on the single loop system which used a ball screw that had the backlash. Also, we have made an inner loop with a classical velocity and torque controller which was forcing the current of d axis to be zero by using a permanent-magnet synchronous motor and composed the outer loop with linear encoder for sensing a position of the loader. Also, we have used least squares fit(LSF) observer for reducing noise when we got velocity from position outputs. We have shown a good result by using the dual loop through simulation and experiment.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.447-454
• /
• 2011

This paper reports a filtered velocity feedback(FVF) controller, which is an alternative to direct velocity feedback(DVFB) controller. The instability problems due to high frequency response under DVFB can be alleviated by the suggested FVF controller. The FVF controller is designed to filter out the unstable high frequency response. The FVF controller and the dynamics of clamped beams under forces and moments are first formulated. The effects of the design parameters(cut-off frequency, gain, and damping ratio) on the stability and the performance are then investigated. The cut-off frequency should be selected not to affect the system stability. The magnitude of the open loop transfer function(OLTF) at the cut-off frequency should be small. As increasing the gain of the FVF controller, the magnitude of the OLTF is increased, so that the closed loop response can be reduced more. The enhancement of the OLTF at the cut-off frequency is reduced but the phase behavior around the cut-off frequency is distorted, as the damping ratio is increased. The control performance is finally estimated for the clamped beam. More than 10 dB reductions in velocity response can be achieved at the modal frequencies from the first to eighth modes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.264-270
• /
• 2011

This paper reports a filtered velocity feedback (FVF) controller, which is an alternative to direct velocity feedback (DVFB) controller. The instability problems due to high frequency response under DVFB can be alleviated by the suggested FVF controller. The FVF controller is designed to filter out the unstable high frequency response. The FVF controller and the dynamics of clamped beams under forces and moments are first formulated The effects of the design parameters (cut-off frequency, gain, and damping ratio) on the stability and the performance are then investigated. The cut-off frequency should be selected not to affect the system stability. The magnitude of the open loop transfer function (OLTF) at the cut-off frequency should be small. As increasing the gain of the FVF controller, the magnitude of the OLTF is increased, so that the closed loop response can be reduced more. The enhancement of the OLTF at the cut-off frequency is reduced but the phase behavior around the cut-off frequency is distorted, as the damping ratio is increased The control performance is finally estimated for the clamped beam. More than 10dB reductions in velocity response can be achieved at the modal frequencies from the first to eighth modes.

• Korean Chemical Engineering Research
• /
• 제61권3호
• /
• pp.446-455
• /
• 2023

공기부양반응기(airlift reactor) 내의 액체순환속도(liquid circulation velocity)를 예측하기 위한 수학적 모형이 유체순환고리(fluid circulation loop)에 대한 기계적 에너지 수지를 기초로 개발되었다. 그 모형은 90° 방향전환으로 인한 에너지 손실과 반응기의 각 부위에서의 마찰로 인한 에너지 손실 그리고 단면적의 변화로 인한 에너지 손실을 모두 고려하였다. 마찰과 방향전환 그리고 단면적 변화에 의한 손실계수를 각각 고려한 모형이 집중매개변수(lumped parameter)를 사용한 기존의 모형보다 액체순환속도를 더 잘 예측할 수 있었다. 순환액체속도는 추적자펄스방법(tracer pulse method)으로 측정하였다. 개발된 모형은 상하부에 연결관(connecting pipe)을 갖는 외부순환 공기부양반응기에서 얻은 본 연구의 실험 결과의 대부분은 물론이고 다양한 형태의 공기부양반응기에서 얻어진 다른 연구자들의 결과도 ±20%이내의 오차로 잘 예측할 수 있었다. 외부 및 내부순환 공기부양반응기에서 순환유체의 90° 방향전환과 관련된 손실계수에 대한 유용한 실험식을 구하여 액체순환속도를 예측하는 데 사용하였다.