• 한국식품저장유통학회지
• /
• 제17권1호
• /
• pp.16-22
• /
• 2010

농산물 저온저장고 내부의 온도분포 균일화를 수치해석적으로 분석하기 위해 3차원 CFD 시뮬레이션을 수행하였다. CFD 시뮬레이션 모델은 속도벡터 및 온도분포 측정치와 비교를 통해 검증하였으며, 온도분포 균일화 향상을 위한 적정 팬용량 및 적재방법을 설정하기 위해 몇 가지 팬풍속 및 저장물과 벽체간의 거리 등에 대해 기류패턴과 온도 분포를 분석하였다. CFD 시뮬레이션의 검증에서 속도벡터 분포는 PIV시스템에 의한 측정치와 비교했을 때 표준 k-$\varepsilon$모델 예측치와 측정치의 상대적 오차는 24.5%로 나타났고, RSM 모델 예측치와 측정치의 상대적 오차는 16.7%로 나타나 RSM 난류모델의 예측 정밀도가 더 높은 것으로 나타났다. 온도분포 검증 결과 실측치와 측정치의 R. M. S. 값은 농산물 무적재 상태에서 $0.33^{\circ}C$, 농산물 적재 상태에서는 $0.28^{\circ}C$로 나타났으며 예측값과 측정값의 온도분포 경향은 잘 일치하는 것으로 나타났다. 검증된 시뮬레이션 모델을 이용하여 $6{\times}10$열 2단 팔레트에 농산물이 적재되고 냉각용 송풍팬이 2개인 저온저장고에 대해 송풍팬의 풍량 및 저장물과 벽체와의 간격 변화의 영향을 분석한 결과, 저장물과 벽체와의 거리는 300 mm 이상, 송풍량은 300 CMM 이상에서 저장고 내의 공기 온도차는 $1^{\circ}C$이내로 유지되며 팔레트 사이에 간격을 둔 경우 온도분포의 균일성이 향상되는 것으로 나타났다.

• 전자공학회논문지
• /
• 제51권5호
• /
• pp.88-96
• /
• 2014

현대 전자전 지원 시스템에서는 TDOA (time difference of arrival)나 FDOA (frequency difference of arrival)와 같은 비도래각 정보를 이용하여 미상 신호원의 위치를 추정하는 정밀 위치추정 기법의 필요성이 높아지고 있다. 기존의 단일 TDOA 기반 기법에 관한 연구는 위치추정 알고리즘뿐만 아니라 측정 정확도 향상에 대해 다양한 진척이 이루어졌으며, 최근에는 TDOA와 FDOA 정보를 동시에 사용하여 적은 수신단 수로 보다 많은 정보를 획득할 수 있고 신호원의 속도 추정이 가능한 복합 위치추정 시스템에 관한 연구가 수행되고 있다. 이러한 과정에서 TDOA/FDOA 복합 위치추정 시스템이 기존 단일 TDOA 시스템을 대체할 수 있는 추정 성능을 갖기 위해 요구되는 FDOA 측정 정확도와 성능분석 과정이 필요하다. 본 논문에서는 CRLB (Cramer-Lao lower bound)의 분석을 통해 TDOA/FDOA 위치추정 시스템이 단일 TDOA 위치추정 시스템에 비해 향상된 추정 정확도를 갖기 위해 요구되는 FDOA 측정 정확도의 기준과 이에 따른 기여도를 분석하고, Gauss-Newton 알고리즘을 이용하여 분석 결과를 검증한다.

• 한국터널지하공간학회 논문집
• /
• 제9권2호
• /
• pp.171-182
• /
• 2007

도심지 개착구간의 교통 및 환경적인 영향을 최소화하기 위하여 단면적 $200\;m^2$ 이상의 정거장터널이 퇴적암반 중에 계획되었으나 토피고가 13 m 이하인 설계조건에 직면하게 되었다. 본 연구에서는 패턴설계가 아닌 시공사례와 아칭효과 발현을 기초로 세 가지 요소 - 단면형상의 영향, 작용하중의 적용방법, 지보방안과 터널안정성분석 - 를 중심으로 설계방향이 논의되었다. 단면형상의 역학적인 영향에 기초하여 기본설계안과 연구단면안이 유도되었고, 지보방안은 터널천반부의 침하방지 및 역학적인 평형상태를 유지하기위한 파이프루프 보조공법과 NATM의 지보원리를 활용하였다. 두 설계안의 비교분석으로부터, 터널라이닝을 개착구조물의 연장선상에서 제약한 설계조건과 터널안정성 및 철근배근의 시공성에 대해 기본설계안이 적합한 방안임을 확인할 수 있었다. 그리고 동일한 건축한계로 아치부의 응력집중이 발생되지 않는 안정적인 응력분포를 나타내는 연구단면안의 분석결과에서 보듯이 향후 대단면터널 설계기술의 향상을 위해 단면형상의 영향과 이완하중의 적용방안이 심도 있게 검토되어야 함을 알 수 있다.

• 한국농공학회논문집
• /
• 제63권6호
• /
• pp.77-88
• /
• 2021

Duck industry had a rapid growth in recent years. Nevertheless, researches to improve duck house environment are still not sufficient enough. Moisture generation of duck house litter is an important factor because it may cause severe illness and low productivity. However, the measuring process is difficult because it could be disturbed with animal excrements and other factors. Therefore, it has to be calculated according to the environmental data around the duck house litter. To cut through all these procedures, we built several machine learning regression model forecasting moisture generation of litter by measured environment data (air temperature, relative humidity, wind velocity and water contents). 5 models (Multi Linear Regression, k-Nearest Neighbors, Support Vector Regression, Random Forest and Deep Neural Network). have been selected for regression. By using R-Square, RMSE and MAE as evaluation metrics, the best accurate model was estimated according to the variables for each machine learning model. In addition, to address the small amount of data acquired through lab experiments, bootstrapping method, a technique utilized in statistics, was used. As a result, the most accurate model selected was Random Forest, with parameters of n-estimator 200 by bootstrapping the original data nine times.

• 한국항공우주학회지
• /
• 제50권8호
• /
• pp.531-540
• /
• 2022

본 논문에서는 IMM 필터 기반으로 장사정포의 탄종을 식별하고 탄착점을 신속하게 예측하는 알고리즘을 제시한다. 탄도궤적 방정식을 시스템 모델로 사용하고, 각각 다른 탄도계수 값을 갖는 3가지 모델을 IMM 필터에 적용한다. 가속도를 중력, 공기저항, 양력에 의한 3가지 성분으로 나누고 양력가속도를 새로운 상태변수로 추가하여 추정한다. 속도벡터와 양력가속도가 수직이라는 운동학 조건을 유사 측정값으로 추가한 측정방정식을 다룬다. IMM 필터를 통해 추정된 상태변수와 모드 확률이 가장 높은 모델의 탄도계수를 기반으로 탄착점을 예측한다. 탄착점 예측을 위해 일반적으로 사용되는 룽게-쿠타 수치적분 대신, 준해석적인 방법을 사용하여 적은 계산량으로 탄착점을 예측할 수 있음을 설명한다. 마지막으로 최소제곱법을 이용한 상태변수 초기화 방법에 대해 제안하고 성능을 확인하였다. 탄종식별, 탄착점 예측 및 초기화를 포함한 통합 알고리즘을 제시하고 시뮬레이션을 통해 제안한 방법의 타당성을 검증하였다.

• 보존과학회지
• /
• 제37권3호
• /
• pp.209-219
• /
• 2021

본 연구에서는 도심지에 위치한 숭례문을 중심으로 유입류 풍향 조건에 따라 변화되는 풍환경을 수치해석하였다. 이를 위해 지리정보시스템 자료와 전산유체역학 모델을 이용하여 대상영역의 상세 바람장을 수치모의하였으며, 벡터장, 3차원 바람속도성분, 풍속장 등에 대한 흐름특성을 분석하였다. 대상영역에서는 건물협곡을 따라 흐르는 바람길의 형성과 건물에 의한 바람의 회전 및 와류 등 급격한 풍향의 변화가 모의되었으며, 그 영향으로 숭례문 주변에서는 유입류의 풍향에 의존하지 않는 복잡한 흐름의 양상이 나타났다. 숭례문 지점에서의 풍속은 지표풍(지상 2 m)과 비교하여 상층마루 높이(지상 14 m)에서 평균 3배 이상 강하게 형성되었고, 유입류가 동풍인 경우에 전반적으로 높게 나타났으며, 숭례문의 남동 측면이 상대적으로 바람에 의한 영향이 클 것으로 예측되었다. 본 연구를 통하여, 고층건물 및 고밀도 건물군 등 인공구 조물에 의한 바람길 및 빌딩풍 등의 형성이 도심지에 위치한 건축문화재에 미치는 영향을 파악하고 대책을 마련하기 위한 상세 풍환경 평가의 필요성이 제시되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권5호
• /
• pp.375-395
• /
• 2006

Purpose: Lingual nerve (LN) damage may be caused by either tumor resection or injury such as wisdom tooth extraction, Although autologous nerve graft is sometimes used to repair the damaged nerve, it has the disadvantage of necessity of another operation for nerve harvesting. Moreover, the results of nerve grafting is not satisfactory. The nerve growth factor (NGF) is well-known to play a critical role in peripheral nerve regeneration and its local delivery to the injured nerve has been continuously tried to enhance nerve regeneration. However, its application has limitations like repeated administration due to short half life of 30 minutes and an in vivo delivery model must allow for direct and local delivery. The aim of this study was to construct a well-functioning $rhNGF-{\beta}$ adenovirus for the ultimate development of improved method to promote peripheral nerve regeneration with enhanced and extended secretion of hNGF from the injured nerve by injecting $rhNGF-{\beta}$ gene directly into crush-injured LN in rat model. Materials and Methods: $hNGF-{\beta}$ gene was prepared from fetal brain cDNA library and cloned into E1/E3 deleted adenoviral vector which contains green fluorescence protein (GFP) gene as a reporter. After large scale production and purification of $rhNGF-{\beta}$ adenovirus, transfection efficiency and its expression at various cells (primary cultured Schwann cells, HEK293 cells, Schwann cell lines, NIH3T3 and CRH cells) were evaluated by fluorescent microscopy, RT-PCR, ELISA, immunocytochemistry. Furthermore, the function of rhNGF-beta, which was secreted from various cells infected with $rhNGF-{\beta}$ adenovirus, was evaluated using neuritogenesis of PC-12 cells. For in vivo evaluation of efficacy of $rhNGF-{\beta}$ adenovirus, the LNs of 8-week old rats were exposed and crush-injured with a small hemostat for 10 seconds. After the injury, $rhNGF-{\beta}$ adenovirus($2{\mu}l,\;1.5{\times}10^{11}pfu$) or saline was administered into the crushed site in the experimental (n=24) and the control group (n=24), respectively. Sham operation of another group of rats (n=9) was performed without administration of either saline or adenovirus. The taste recovery and the change of fungiform papilla were studied at 1, 2, 3 and 4 weeks. Each of the 6 animals was tested with different solutions (0.1M NaCl, 0.1M sucrose, 0.01M QHCl, or 0.01M HCl) by two-bottle test paradigm and the number of papilla was counted using SEM picture of tongue dorsum. LN was explored at the same interval as taste study and evaluated electro-physiologically (peak voltage and nerve conduction velocity) and histomorphometrically (axon count, myelin thickness). Results: The recombinant adenovirus vector carrying $rhNGF-{\beta}$ was constructed and confirmed by restriction endonuclease analysis and DNA sequence analysis. GFP expression was observed in 90% of $rhNGF-{\beta}$ adenovirus infected cells compared with uninfected cells. Total mRNA isolated from $rhNGF-{\beta}$ adenovirus infected cells showed strong RT-PCR band, however uninfected or LacZ recombinant adenovirus infected cells did not. NGF quantification by ELISA showed a maximal release of $18865.4{\pm}310.9pg/ml$ NGF at the 4th day and stably continued till 14 days by $rhNGF-{\beta}$ adenovirus infected Schwann cells. PC-12 cells exposed to media with $rhNGF-{\beta}$ adenovirus infected Schwann cell revealed at the same level of neurite-extension as the commercial NGF did. $rhNGF-{\beta}$ adenovirus injected experimental groups in comparison to the control group exhibited different taste preference ratio. Salty, sweet and sour taste preference ratio were significantly different after 2 weeks from the beginning of the experiment, which were similar to the sham group, but not to the control group.

• 한국해양학회지:바다
• /
• 제13권1호
• /
• pp.42-55
• /
• 2008

금강하구 연안역에서 HF radar로 측정한 유속의 정확도를 평가하기 위해 HF radar의 마주보는 radial 유속들을 비교하고, HF radar로 측정한 유속을 현장측정 유속과 비교하였다. 비교 자료들에 대한 회귀선과 편차는 주성분 분석(Principal Component Analysis)으로 구하였다. HF radar site를 연결하는 선의 중간지점에서 마주보는 radial vector를 비교하였을 때 RMS 편차는 동계에 4.4 cm/s, 하계에 5.4 cm/s이었다. HF radar와 유속계로 측정한 유속성분을 비교하여 분석된 RMS 편차에서 GDOP(Geometric Dilution of Precision) 효과를 제거하였을 때 HF radar의 합성 속도 측정오차는 GDOP 값이 적절한 정점들에서 5.1 cm/s 이내였다. 서로 다른 두 방법에 의해 구해진 이 결과는 연구해역에서 HF radar로 측정된 유속의 정확도 하한이 5.4 cm/s임을 제시한다. 기존의 연구에서와 같이 RMS 편차는 섬 주변에 있는 관측점에서 크게 되고, 두 radar에서 평균거리가 멀어질수록 신호 대 잡음수준과 radial vector 교차각의 감소로 인해 증가하였다. GDOP 값을 이용한 오차분리 과정에서 속도성분별 GDOP 값이 유사하고 비교 유속의 성분별 RMS 편차도 비슷한 값을 보이는 경우 HF radar 유속의 오차가 불확실한 값으로 도출될 수도 있음이 밝혀졌다. GDOP가 정상적인 radar 관측 범위 내에 있는 정점에서 측정된 유속을 조류와 해류로 분리하였을 때 HF radar 유속에서 구해진 조류타원의 특성은 유속계로 측정된 타원특성과 잘 부합하였고, 해류의 시간적 변화는 바람과 밀도장의 외력에 의한 물리적 과정을 반영하는 반응을 보였다.

• Journal of Biosystems Engineering
• /
• 제4권1호
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권6호
• /
• pp.465-473
• /
• 2004

Purpose : The essential triad for nerve regeneration is nerve conduit, supporting cell and neurotrophic factor. In order to improve the peripheral nerve regeneration, we used polyglycolic acid(PGA) tube and brain-derived neurotrophic factor(BDNF) gene transfected Schwann cells in sciatic nerve defects of SD rat. Materials and methods : Nerve conduits were made with PGA sheet and outer surface was coated with poly(lactic-co-glycolic acid) for mechanical strength and control the resorption rate. The diameter of conduit was 1.8mm and the length was 17mm Schwann cells were harvested from dorsal root ganglion(DRG) of SD rat aged 1 day. Schwann cells were cultured on the PGA sheet to test the biocompatibility adhesion of Schwann cell. Human BDNF gene was obtained from cDNA library and amplified using PCR. BDNF gene was inserted into E1 deleted region of adenovirus shuttle vector, pAACCMVpARS. BDNF-adenovirus was multiplied in 293 cells and purified. The BDNF-Adenovirus was then infected to the cultured Schwann cells. Left sciatic nerve of SD rat (250g weighing) was exposed and 14mm defects were made. After bridging the defect with PGA conduit, culture medium(MEM), Schwann cells or BDNF-Adenovirus infected Schwann cells were injected into the lumen of conduit, respectively. 12 weeks after operation, gait analysis for sciatic function index, electrophysiology and histomorphometry was performed. Results : Cultured Schwann cells were well adhered to PGA sheet. Sciatic index of BDNF transfected group was $-53.66{\pm}13.43$ which was the best among three groups. The threshold of compound action potential was between 800 to $1000{\mu}A$ in experimental groups which is about 10 times higher than normal sciatic nerve. Conduction velocity and peak voltage of action potential of BDNF group was the highest among experimental groups. The myelin thickness and axonal density of BDNF group was significantly greater than the other groups. Conclusion : BDNF gene transfected Schwann cells could regenerate the sciatic nerve gap(14mm) of rat successfully.