• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.230-234
• /
• 1993

In order to obtain the fundamental factors influencing on gelation of Alaska pollack meat paste during processing, the states of water in gel from meat paste were studied using differential scanning calorimetry(DSC) and thermogravimetry(TG). In the differential scanning calorimetry, the calorimetric curves of gels were characterized by single peak through the evaporation of water. Each curve was divided into two divisions below and above $105^{\circ}C(Q_1\;and\;Q_2)$, and a quotient, $R_{105}[={Q_2/(Q_1+Q_2)}+100]$ was adopted to represent the amount of immobilized water in the total water of gels. There was a good correlationships between gel strength values and those quotients($R_{105}$), the correlation coefficient was 0.93. Three types of water(A, B, C) differentiated by evaporating velocity were regarded as free water and it was abundant among the three types of water. The type C water was regarded as the water in so-called mono-molecular layer region. The ratio of the content C versus total water content showed good correlationships with the gel strength and its correlation coefficient was 0.99.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.38-45
• /
• 2013

The porous ceramic beads using mine tailing were prepared and applied to catalytic converter for NOx/SOx removal. Catalytic support was used synthesized mesoporous silica (SBA-15) which coated on surface. Internal structure for porous ceramic beads was composed of three-dimensional network structure and porosity was about 80%. In addition, the specific surface area for mesoporous silica(SBA-15) coated on converter was significantly increased 55 $m^2/g$ compared with 0.8 $m^2/g$ before coating. NOx/SOx removal experiment was performed using $V_2O_5$ and $V_2O_5$/CuO converter. NOx conversion ratio for $V_2O_5$/CuO converter was approximately increased 10% compared to $V_2O_5$ converter. In addition, catalytic converter of $V_2O_5$/CuO was shown to remove 95% of NOx and 90% of SOx at reaction temperature of $350^{\circ}C$, space velocity of 10000 $h^{-1}$ and $O_2$ concentrations of 5%, respectively.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.78-91
• /
• 2011

The Usuki Stone Buddha Statues in Japan are carved on mainly dark gray welded lapilli tuff accompanied by lenticular fiamme. This rock is composed of matrix which contains feldspar and opaque minerals with some phenocrysts of quartz and feldspar. The matrix is slight to highly welded. The statues have been weathered and weakened by salt and freezing of water. To enhance the mechanical properties of the rock, consolidants and water repellents were applied. The absorption ratio of the rock was highly decreased after the treatment of the water repellents, the consolidant OH 100, as well. Ultrasonic velocity revealed similarly higher values in the treated rock by KSE 300 and OH 100, compared to non-treated rock. KSE 300, especially, highly increased the Equotip surface hardness. All studied consolidants and water repellents were found to change the original color of the stone. SNL, specifically, resulted the significant change in color. In addition, KSE 300 were observed to improve resistance to weathering such as microcrack and fracture through freezing-thawing test after treatment.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.40-61
• /
• 2017

This study investigated material characteristics of composition and variable strength measurement using physicochemical and petrographic analysis for lime-soil mixture barrier tombs of Guri Galmae site in Joseon Dynasty. The tomb barriers are composed mainly of microcrystalline calcite, quartz, feldspar and mica with lime matrix. The lime matrix shows compact sheet texture, and some samples show hydration aggregates with needle-shaped textures. Gypsum occurred as a secondary process where carbonization reactions were poor. Concentrations of CaO in the tomb barrier very widely ranged from 4.43 to 36.19 wt.%, specific gravity and absorption ratio of the materials show of 1.35 to 1.62 and 20.1 to 32.6%, respectively. As the rebound hardness, the materials ranged from 10.0 to 28.4 (mean 15.7). The values are higher in the $-90^{\circ}$ direction rather than in the $0^{\circ}$ direction with the consequence that the values indicate more strength toward the vertical direction. Difference in strength by directions was caused by the directions of the tomb barriers, which is related to the processes in each stage. In the tomb barriers, ultrasonic velocity and unconfined compressive strength ranged from 1,049.2 to 1,728.9m/s and under 5.00MPa, respectively. Variation patterns between the two are very similar in values. As the result of composition and strength, the materials of higher contents on CaO are higher in strength values. Generally, techniques and skills to make the lime-soil mixture barriers are interpreted as low qualities in relatively.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.151-157
• /
• 2021

Charcot-Marie-Tooth disease (CMT) is a slowly progressive hereditary degenerative disease and chronic inflammatory demyelinating polyradiculoneuropathy (CIDP) is an acquired immune-mediated disorder characterized by weakness and sensory deficits. The purpose of this study was to analyze and compare the electrophysiological characteristics observed in sensory nerve conduction studies (SNCS) of both diseases. A retrospective study of 65 patients with a diagnosis of CIDP (N=35) and CMT type I (N=30) was performed. This study analyzed No potentials ratio, distal compound nerve action potential (dCNAP) of various nerve types, and a correlation coefficient analysis of the sensory nerve conduction velocity (SNCV). As a result, I found that CMT 1 was more severe systemic demyelinating and axonal polyneuropathy better than CIDP (P<0.05). In a quantitative analysis of dCNAP and SNCV, especially sural nerve was the most severe nerve injury observed in both diseases. In correlation and scatter plot analysis, CMT 1 showed relatively high correlations compared to CIDP based on the correlation coefficient analysis (Fisher's Z test) of SNCV. The results of this study suggested that CMT 1 showed the slowness in SNCV, one of the characteristics of demyelinating polyneuropathy, and this slowing had a uniform pattern. In conclusion, electrophysiological characteristic of SNCS may be useful in the diagnosis and research between patients with CMT 1 and CIDP.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.381-393
• /
• 2021

Physical, mechanical, hydraulic, and geophysical tests were applied to validate methods of inspecting the effectiveness of grouting on an agricultural reservoir dam. Data obtained from series of in situ and laboratory tests considered four stages: before grouting; during grouting; immediately after grouting; and after aging the grouting for 28 days. The results of SPT and triaxial tests, including the unit weight, compressive strength, friction angle, cohesion, and N-value, indicated the extent of ground improvement with respect to grout injection. However, they sometimes contained errors caused by ground heterogeneity. Hydraulic conductivity obtained from in situ variable head permeability testing is most suitable for identifying the effectiveness of grouting because the impermeability of the ground increased immediately after grouting. Electric resistivity surveying is useful for finding a saturated zone and a seepage pathway, and multichannel analysis of surface waves (MASW) is suitable for analyzing the effectiveness of grouting, as elastic velocity increases distinctly after grouting injection. MASW also allows calculation from the P- and S- wave velocities of dynamic properties (e.g., dynamic elastic modulus and dynamic Poisson's ratio), which can be used in the seismic design of dam structures.

• Korean Journal of Environment and Ecology
• /
• v.34 no.6
• /
• pp.551-557
• /
• 2020

This study surveyed the ecological characteristics of Ladislabia taczanowskii at Songcheon Stream from March to November 2019. The species inhabited upstream, where the riverbed structure was mostly covered with boulders and cobbles. The water depth was 31-148 cm, and the stream velocity was fast at 0.94±0.23 (0.51-1.39) m/sec. The gender ratio of females to males was 1 : 0.89. The age according to the total length frequency distribution indicated that the group with 38-70 mm below in total length was one year old, the group with 70-100 mm was two years old, the group with 100-120 mm was three years old, and the group over 120-128 mm was over four years old. The total length of sexually mature fishes was 70 mm for females and 75 mm or more for males. The spawning season was from May to August, and the water temperature was 15.5-20.1℃ during the period. The prosperous spawning season was from June to July, and the water temperature was 15.8-17.2℃ during the period. The spawning ground was where the riffle began in the pool, and its bottom was formed of sand and gravel. The width was about 150 cm, and the water depth was 20 to 50 cm. The average number of eggs in the ovaries was 821 (401-1,314) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 1.62±0.02 (1.43-2.01) mm. The live foods of L. taczanowskii Cyanophyta, Chlorophyta, Bacillariophyta, Ephemeroptera, and Diptera. The feeding habit of L. taczanowskii is omnivorous, but more than 90% of the stomach content was attached algae.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.460-468
• /
• 2021

This study investigated the enhanced combustion efficiency of an "air-cooled combustion system" with single F.D. fan, and performed a numerical analysis for the operation and design conditions to increase the combustion efficiency. The combustion efficiency in an actual combustor was compared before and after the structure modification. Numerical analysis for application of a single fan revealed the difficulty of forming a turbulence for circular combustion conditions. This is because the supply ratio of combustion air supplied into 2 flow paths becomes irregular in the combustion furnace due to a change in friction force and pressure in each flow path. Subsequently, two methods of supplying air into the combustion furnace were analyzed numerically to obtain the optimal combustion conditions of an air-cooled combustion system. The first method involved injecting the preheated combustion air after a 180~360 degree rotation from the outer wall, whereas in the second method, the combustion air was injected into the combustion furnace in a tangential direction after primary heat exchange outside the combustion furnace, by applying a rotatable vane structure in the combustion furnace. Results reveal that application of a single F.D. fan to the air injection into a rotatable combustion furnace is desirable for optimization of the combustion conditions for applying a duct structure having a dual cooling wall for the cooling of the outer wall of the combustion furnace, and for maintaining perfect mixing in the combustion furnace. We therefore confirmed enhanced combustion efficiency by comparing the actual combustion efficiency before and after structure modification.

• Korean Journal of Environment and Ecology
• /
• v.35 no.3
• /
• pp.277-284
• /
• 2021

This study surveyed the ecological characteristics of Squalidus gracilis majimae at Nakdong River tributary Sinan Stream from January to December 2020. The species inhabited the riverbed that was mostly covered with gravel and sand. The water depth was 27-158 cm, and the average was rather deep at 54 cm. The stream velocity was slow at 0.41±0.19 (0.24-0.86) m/sec. The gender ratio of females to males was 1:0.73. According to the total length-frequency distribution, the age indicated that the group with less than 50 mm in total length was one year old, the group with 70-69 mm was two years old, and the group over 70 mm was three years old. The total length of sexually mature fishes was 50 mm for females and 60 mm for males. The spawning season was from June to July, and the water temperature was 20.9-23.4℃ during the period. The prosperous spawning season was July. The average number of eggs in the ovaries was 1,009 (595-1,630) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 0.78±0.08 (0.57-0.83) mm. The live foods were S. gracilis majimae Protozoa, attached algae, zooplankton, and aquatic insects. The feeding habits of S. gracilis majimae are omnivorous, but more than 80% of the stomach content was aquatic insects, Chironomidae spp. The larger the size of this species, the greater the amount and frequency of eating aquatic insects, which are animal feeds. The population that ate aquatic insects did not eat vegetable food.

• Korean Journal of Environment and Ecology
• /
• v.35 no.6
• /
• pp.601-608
• /
• 2021

This study surveyed the ecological characteristics of Squalidus multimacultus at Taehwa River tributary Cheokgwa Stream from January to December 2020. The species inhabited the riverbed that was mostly covered with sand. The water depth was 25-164 cm, and the average was rather deep at 68 cm. The stream velocity was slow at 0.21±0.26 (0.16-0.43) m/sec. The gender ratio of females to males was 1:0.99. The age according to the total length-frequency distribution indicated that the group with less than 50 mm (29.4 - 49 mm) in total length was one year old, the group with 50 - 69 mm was two years old, the group with 70 - 89 mm was three years old, and the group over 90 mm was four years old. The total length of sexually mature fishes was 40 mm for both males and females. The spawning season was from July to August, and the water temperatures was 23.8 - 25.4℃ during the period. The prosperous spawning season was August. The average number of eggs in the ovaries was 1,395 (648 - 2,201) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 0.67±0.24 (0.62 - 0.83) mm. The live foods were of S. multimacultus attached algae, zooplankton, aquatic insects, and Mollusca. The feeding habits of S. multimacultus were omnivorous, but more than 95% of the stomach content was plant-attached algae. The larger the size of this species, the greater the amount and frequency of eating aquatic insects, which were animal feeds. The population that ate aquatic insects did not eat vegetable food.