• 한국컴퓨터정보학회논문지
• /
• 제21권3호
• /
• pp.9-15
• /
• 2016

In this paper, DC-PLC typed one-wire controller was designed and manufactured especially for In-vehicle safe devices. One-wire by DC-PLC scheme is to be used as a power supply and ground to process the sensor data and to operate the vehicle actuators. To avoid complicate wires, we use the conventional wires without installing extra communication lines. The data collected from the sensors are transmitted to the main controller, processed by programming, and run the actuators corresponding to the commands sending to vehicle control board. The proposed method shows that only One-wire without requiring several wires make In-vehicle control devices simple and reduce the damage due to the loss of the wiring.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.155-160
• /
• 2001

The road simulator system can simulate the longitudinal, lateral, and vertical movement changed by road conditions and vehicle dynamic characteristics while driving. This system provides the durability evaluation of vehicle suspensions. The system consists of hydraulic actuators, link mechanism, and servo controller. The hydraulic actuators are specially manufactured using low friction seals to endure high speed movement. The link mechanism is designed in order to minimize the dynamic effect during motion and remove the interference between 3axes actuators. The servo controller is composed of sensors, sensor amplifiers - displacement transducers and load cells, and an industrial PC with DSP board which calculates the control algorithm to control hydraulic actuators. The test results are included to evaluate the performance of this simulator comparing vehicle driving test.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.89-94
• /
• 2018

The electric power system design of the electric vehicle are required to improve the performance. The electric power system on the electric vehicle are consist of a battery, a pedal sensor, an electric motor and a controller. In this paper, Automotive manufacture's various electric vehicle models are investigated and analyzed. The mathematical models for the electric power system are studied, and then important variables are considered. Simulation and experimental test results show the model of the electric power system on the electric vehicle and design parameter decision are effective to the electric vehicle design.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.282-290
• /
• 2014

본 논문은 1인승 전기차량의 임베디드 전동 제어장치 설계를 제안하였다. 제안된 임베디드 장치는 PIC18F8720 프로세서, 16Mb flash ROM, 32Mb SDRAM과 신호처리회로로 설계되었다. 제안된 1인승 전기차량은 4KW 인휠 BLDCM, $180^{\circ}$ 도통 공간 벡터제어 3상 전압형 인버터, PID 속도제어기와 전동제어 장치와 임베디드 제어장치로 구성된다. 이 1인승 전기차량은 역 3륜 형태의 기계적인 구조를 가지고 있으며, 인휠 BLDCM과 틸팅 기능을 가지는 조향 메카니즘이 적용되었다. 또한 제안된 임베디드 전동제어장치의 성능은 PEV에 대한 Lab 실험과 도로 주행시험을 통하여 검증하였다.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.1-10
• /
• 2015

Automotive Theft has been an obstinate problem around the world. Design and manufacture of anti-theft systems have become more and more complex due to the rise in complexity of theft in the system. Most of the anti-theft systems available in the market, are the alarm types which audibly deter some thieves away but do not prevent one's car from being stolen and even are not good enough to meet the growing complexity of theft in the country. This paper presents a simple and an efficient anti-theft system which provides improved security by the use of efficient access mechanisms and immobilization systems. This security system can immobilise an automobile and its key auto systems through remote control when it is stolen. It hence deters thieves from committing the theft. It also effectively prevents stealing of key auto systems for reselling by introducing four layers of security features written in the form of firmware and embedded on the Electronic Control Units (ECUs). The particulars of system design and operation are defined in the paper. The experimental outcomes show that this system is practicable and the owner can steadily control his vehicle within a few seconds.

• 한국전기전자재료학회논문지
• /
• 제34권6호
• /
• pp.475-479
• /
• 2021

There are many difficulties in the applications of smart manufacturing technology in the era of the 4th industrial revolution. In this paper, a test bed was built to aim for acquiring smart manufacturing technology, and the test bed was designed to acquire basic technologies necessary for PLC (Programmable Logic Controller), HMI, Internet of Things (IoT), artificial intelligence (AI) and big data. By building a vehicle maintenance lift that can be easily accessed by the general public, PLC control technology and HMI drawing technology can be acquired, and by using cloud services, workers can respond to emergencies and alarms regardless of time and space. In addition, by managing and monitoring data for smart manufacturing, it is possible to acquire basic technologies necessary for embedded systems, the Internet of Things, artificial intelligence, and big data. It is expected that the improvement of smart manufacturing technology capability according to the results of this study will contribute to the effect of creating added value according to the applications of smart manufacturing technology in the future.

• 한국정보전자통신기술학회논문지
• /
• 제13권6호
• /
• pp.556-561
• /
• 2020

현대 사회의 농업 인구의 고령화 및 감소로 농업 환경 개선이 필요한 실정이고 대표적인 문제 중 하나이다. 그리고 대부분의 작업체계에서 항상 운반 작업이 필요하기 때문에 운반 작업에 사용되는 시간과 노동력의 비율이 매우 높다. 이에 따라 많은 종류의 운반차들이 개발되고 판매되고 있으며, 초기에는 대부분 화석연료를 사용하는 동력운반차가 주종을 이루고 있다. 그러나 최근에는 지구온난화와 기후변화협약 등 국제 환경규제의 강화 및 화석연료의 고갈로 인한 수소, 연료전지, 태양광, 바이오 등 차세대 친환경에너지를 주목하고 있다. 그래서 본 연구에서는 화석연료를 대체하는 친환경적이며 누구나 쉽게 조작이 가능하고 안전한 농업용 전기운반차를 개발하는 것을 최종목표로 한다. 농업용 전기운반차의 광범위한 차속 조절 및 안정성 확보에 초점을 두고 설계하였으며, 성능 및 디자인을 고려하여 프레임, 주행부, 조향부, 컨트롤러 시스템 등으로 구성되어 각 부분별 검토하였다. 본 연구의 농업용 전기운반차가 젊은 인력이 부족한 농경사회에서 고령노동자나 여성들이 쉽고 편하게 작업을 할 수 있고 높은 효율성을 통해서 농경사회에 도움이 될 수 있을 것이다.