• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.347-350
• /
• 2012

최근 자동차 산업의 활성화로 인해 교통사고 급증이 사회 문제화 되면서 사고를 미연에 방지할 수 있는 운전자 보조 시스템에 관한 연구가 활발하게 이루어지고 있다. 일반적으로 자동차 사고 원인의 70% 이상이 운전자 과실에 의해서 발생되고 전체 추돌사고의 75%가 시속 29km 이하의 속도에서 발생한다는 점을 고려할 때, 이를 예방하기 위해서는 운전자의 인지 판단을 보조하는 시스템의 개발이 필수적이다. 본 논문에서는 가장 많은 추돌사고가 일어나는 저속 주행 및 후진 시에 차량 또는 장애물과의 거리를 실시간으로 감시하는 차량 전 후방 감시 시스템을 구현하였다. 구현된 시스템은 10[m]의 감지거리 및 $10^{\circ}$의 지향각을 갖는 고지향각 초음파 센서, 3[m]의 감지 거리 및 $180^{\circ}$의 지향각을 갖는 광지향각 초음파 센서, ATmel 사의 ATmega128로 구성된다.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1125-1134
• /
• 2004

This paper presents a mathematical model which is about the dynamics of not only a two wheel steering vehicle but a four wheel steering vehicle. A sliding mode ABS control strategy and PID rear wheel control logic are developed to improve the brake and cornering performances, and enhance the stability during emergency maneuvers. The performances of the controllers are evaluated under the various driving road conditions and driving situations. The numerical study shows that the proposed full car model is sufficient to accurately predict the vehicle response. The proposed ABS controller reduces the stopping distance and increases the vehicle stability. The results also prove that the ABS controller can be employed to a four wheel steering vehicle and improves its performance. The four wheel steering vehicle with PID rear wheel controller shows increase of stability when a vehicle speed is high and sharp cornering maneuver when a vehicle speed is low compared to that of a two wheel steer vehicle.

• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.9-15
• /
• 2012

The purpose of this study was to investigate the effects of the secondary tasks such as sending text message (STM) and searching navigation (SN) on skin conductance level (SCL) and driving performance of relatively aged and high-experienced drivers. The subjects included 26 taxi drivers; 12 males aged $56.3{\pm}4.4$ with $28.4{\pm}6.4$ years of driving experiences and 14 females aged $55.5{\pm}3.5$ with $19.4{\pm}5.0$ years of driving experiences. All subjects were instructed to keep a constant following distance (30m) from the car ahead and a given vehicle speed (80km/h or 100km/h) in a driving simulator. The relative change of SCL, vehicle velocity deviations, and average following distances were measured during driving only and driving with secondary tasks. The relative change of SCL, average following distance, and vehicle velocity deviation were more increased during the driving with secondary tasks than driving only. The relative change of SCL, vehicle velocity deviation, and average following distance were more affected by driving with 100km/hr than 80km/hr of a given vehicle speed. Secondary tasks increased a work load of drivers in term of SCL change, and decreased driving performance in terms of the vehicle velocity deviation and average following distance.

• 동력기계공학회지
• /
• 제13권2호
• /
• pp.56-62
• /
• 2009

The fatalities of pedestrian account for about 40.0% of all fatalities in Korea 2005. Vehicle-Pedestrian accident generates trajectory of pedestrian. In pedestrian involved accident, the most important data to inspect accident is throw distance of pedestrian. The throw distance of pedestrian can be influenced by many variables. But existing studies have been done for simple factors. The variables that influence trajectory of pedestrian can be classified into vehicular factors, pedestrian factors, and road factors. The trajectory of pedestrian, dynamic characteristics of multi-body were analyzed by PC-CRASH, a kinetic analysis program for a traffic accident. PC-CRASH enables an analyst to investigate the effect of many variables. The influence of the offset of impact point was analyzed by Working Model. Based on the results, the variables that influence trajectory of pedestrian were vehicular frontal shape, vehicular impact speed, the offset of impact point, the height of pedestrian, friction coefficients of pedestrian. However the weight of pedestrian did not affect trajectory of pedestrian considerably.

• 대한임베디드공학회논문지
• /
• 제6권3호
• /
• pp.157-167
• /
• 2011

Although vehicles become more intelligent for convenience and safety of drivers, traffic accidents are increased more and more. Especially, car-to-car single rear impacts in the urban area are increased rapidly because of driver inattention. To prevent rear impacts in the urban area, commercial automobile vendor applies the low-speed short-distance collision warning system. This paper presents low-speed short-distance collision warning algorithm for the city driving by using sensor fusion of laser sensor and ultrasonic sensor. An experiment using embedded microprocessor in the driving track was used to demonstrate the feasibility of the collision warning algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1838-1844
• /
• 2011

In this paper, the propulsion control of a high-speed maglev train is studied. Electromagnetic suspension is used to levitate the vehicle, and linear synchronous motors (LSM) are used for propulsion. In general, a low-speed maglev train uses a linear induction motor (LIM) for propulsion that is operated under 300[km/h] due to the power-collecting and end-effect problem of LIM. In case of the high-speed maglev train over 500[km/h], a linear synchronous motor (LSM) is more suitable than LIM because of a high-efficiency and high-output properties. An optical barcode positioning system is used to obtain the absolute position of the vehicle due to its wide working distance and ease of installation. However, because the vehicle is working completely contactless, the position measured on the vehicle has to be transmitted to the ground for propulsion control via wireless communication. For this purpose, Bluetooth is used and communication hardware is designed. A propulsion controller using a digital signal processor (DSP) in the ground receives the delayed position information, calculates the required currents, and controls the stator currents through inverters. The performance of the implemented propulsion control is analyzed with a small maglev train which was manufactured for experiments, and the applicability of the high-speed maglev train will be explored.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.660-663
• /
• 2004

The vehicle routing problem with time-varying speed(VRPTVS) is difficult to handle with regular problem solving approaches. An approach by partitioning the service zone into three sub-zones to reduce computing time and vehicle traveling distance is suggested in this paper. To develop a partitioning algorithm for VRPTVS, all customer locations are divided into two sections such as morning zone and evening zone, excluding daytime zone. And then each service zone is calculated to find a possible number of delivery points and chosen by time window having more number of possible delivery points by considering customer location and varying speeds. A temporary complete route that can serve all target points is developed by this procedure and a pairwise exchange method is applied to reduce the traveling time.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.105-112
• /
• 1994

A computer program was developed for the simulation of mobility and tractive performance of tracked off-road vehicles. Input parameters for the simulation involve those characterizing track and power drive line of a vehicle and soil conditions upon which the vehicle operates. The simulation predicts tractive performance in terms of soil thrust and motion resistance of track device and mobility performance in terms of the maximum speed, time-distance and time-speed relation that a vehicle can obtain under the given soil conditions. It also determines whether or not the vehicle can move in those conditions. An example of performing simulation was presented and its results showed that the performance prediction was reasonably in a good agreement with the published data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.164-164
• /
• 2000

This paper proposes a moving window technique that extracts lanes and vehicles using the images captured by a CCD camera equipped inside an automobile in real time. For the purpose, first of all the optimal size of moving window is determined based upon speed of the vehicle, road curvature, and camera parameters. Within the moving windows that are dynamically changing, lanes and vehicles are extracted, and the vehicles within the driving lanes are classified as obstacles. Assuming highway driving, there are two sorts of image-objects within the driving lanes: one is ground mark to show the limit speed or some information for driving, and the other is the vehicle as an obstacle. Using characteristics of three-dimension objects, a neural network can be trained to distinguish the vehicle from ground mark. When it is recognized as an obstacle, the distance from the camera to the front vehicle can be calculated with the aids of database that keeps the models of automobiles on the highway. The correctness of this measurement is verified through the experiments comparing with the radar and laser sensor data.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.143-149
• /
• 2006

This paper is primarily focused on the safe navigation between overtaking and overtaken vesselsin restricted waterways under the external forces, such as wind and current. The maneuvering simulation between two ships was conducted to find an appropriate safe speed and distance, which is required to avoid collision. From the viewpoint of marine safety, a greater transversedistance between two ships is more needed for the smaller vessel. Regardless of external forces, the smaller vessel will get a greater effect of hydrodynamic forces than the higher one. In the case of close navigation between ships under the forces of wind and current, the vessel moving at a lower speed is potentially hazardous because the rudder force of the lower speed vessel is not sufficient for steady-state course-keeping, compared to that of the higher speed vessel.