• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.150-155
• /
• 2013

This work present a new method of sealing inspection system for vehicle in which foam rubber materials are used for sealing the vehicle parts. This system is composed from a devices comprising non-contact and real-time scanning on visual inspection in machine parts. We have been investigated qualitative factors that influenced on sealing system of vehicle structure which flexibly attenuated vibration and plenty of foam rubber materials having elastic property. However, there are different factors which still depended on outdated technique (personnel subjective judgment) in the performance inspection of rubber parts, specially for cross section inspection. Through a newly developed inspection system which recently applied for the production line, we successfully achieved more effective results of matching rate by about 80 % in the sealing performance inspection with 0.7% to 1.4% in the repeated errors. These are resulted from non-contacted response by CCD camera and vision program using geometry matching method. We expect that this system may be widely applied in the strict inspection parts of more diverse cross-section in future.

• 자동차안전학회지
• /
• 제15권2호
• /
• pp.49-55
• /
• 2023

In this study, it was analyzed that it is necessary to clarify the quality certification parts system, to make certification codes mandatory for self-certification products that are normally distributed, and to conduct follow-up management so that prompt action and thorough management of test reports are necessary in case of defects. Big data-based data, the detailed number of parts replacement cases, parts cost by part group, share, average labor cost, calculated to analyze the detailed automobile parts industry, and automobile parts certification system and automobile parts market in major countries including Korea and Through the distribution structure analysis, improvement plans for the automobile quality certification parts system were derived.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.49-57
• /
• 2007

This paper proposes a traction control system (TCS) that uses a sliding mode wheel slip controller and a PID throttle valve controller. In addition, a yaw motion controller (YMC) is also developed to improve lateral stability using a PID rear wheel steering angle controller. The dynamics of a vehicle and characteristics of the controllers are validated using a proposed full-car model. A driver model is also designed to steer the vehicle during maneuvers on a split ${\mu}$ road and double lane change maneuver. The simulation results show that the proposed full-car model is sufficient to predict vehicle responses accurately. The developed TCS provides improved acceleration performances on uniform slippery roads and split ${\mu}$ roads. When the vehicle is cornering and accelerating with the brake or engine TCS, understeer occurs. An integrated TCS eliminates these problems. The YMC with the integrated TCS improved the lateral stability and controllability of the vehicle.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.757-764
• /
• 2022

Recently the car tuning has become a trailblazing and creative culture that expresses the personality of the owner. In this paper, the "Car-Vatar", which is the compound word formed from the words "Car" and "Avatar", has been developed to investigate car tuning on the metaverse engineering platform. The Car-Vatar has been developed as a web-based vehicle dynamic simulation service for providing information about car tuning. That has been focused on investigating diverse vehicular performances, such as acceleration, braking, handling and fuel efficiency, according to the tuning vehicles and tuning parts on the virtual engineering platform. The Car-Vatar platform has provided two major services; one is real-time 3D tuning information system for the dress-up and performance-up tuning parts, the other is diverse vehicle dynamics system for the performance-up tuning parts. To check the validation of the Car-Vatar platform, the comparison between virtual simulation results and driving test results has been discussed on various driving environments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1765_1766
• /
• 2009

In this paper, we propose the mathematical model for the vehicle system and the observer for adhesion force. To model the dynamic properties of vehicle system, we have considered two fundamental parts. The first part is the motion equations for vehicle based on Newton's second law. The second part is the torque dynamics of the traction motor. These parts are affected by outer conditions such as adhesive coefficient, running resistance and gradient resistance. The each parts are presented by the numerical formula. From two equations, we get the observer on adhesion force. Simulation results show that the proposed observer have the good performance compared with the normal observer.

• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.373-381
• /
• 2017

The electric vehicle market has increased rapidly in recent years. Established global automakers have announced that electric cars will be developed and distributed. Furthermore, current electric cars are not merely breezes, instead, they are the mainstream of automobiles. However, high prices, short mileage, and long charge times are the main obstacles to the spread of electric vehicles. To solve these problems, the competition for technology development for the expansion of electric vehicles worldwide intensifies because of the improvements in mileage, price reduction, and expansion of charging infrastructure. In this paper, the trends in the development of key technologies for electric vehicles in overseas markets and the present strategic goals for the development of key technologies for electric vehicles in Korea will be identified.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.947-956
• /
• 2018

This research has been conducted to design upright parts of hand-made vehicles with the purpose of reducing material and machining cost while ensuring structural safety. Aluminum knuckles were modelled with three parts in order to enhance design flexibility as well as to reduce CNC machining cost. A vehicle model was constructed in CAD program and simulated in ADAMS View in order to estimate joint forces developing during 20 degree step steering condition at 60km/h. The joint forces obtained in the vehicle dynamics simulation were used for the structural analysis in ANSYS and dimensions of knuckle parts were adjusted until the lowest safety factor reached 2.0. The weight of knuckle decreased by 50% compared to the previous version that was designed without the structural analysis. The overall manufacturing cost decreased by 33% due to the reduction in the material as well as the CNC machining effort.

• 자동차안전학회지
• /
• 제8권4호
• /
• pp.24-30
• /
• 2016

In Korea, the Vehicle Dismantler and Recycler industry is supervised by the Ministry of Land, Infrastructure and Transport under the Automobile Management Act. Also, Korean Automotive recycling businesses are supervised by the Minister of Environment under the Resource Recirculation Act. The main concern of the Minister of Environment is how the wastes from Dismantled vehicles will be environmentally removed, stored, treated, recycled or disposed. In 2000, the European Union (EU) adopted the End-of-Life Vehicles Directive (2000/53/EC) which required Members to ensure the collection, treatment and recovery of end-of-life vehicles (ELVs). The Directive, the most tightly regulated and precautionary legal systems, required that the last owner of a vehicle could drop off the ELV at an authorized treatment facility and that the producers of the ELV should pay the cost of the program. The adoption of the ELVs directive has led the development of Automotive Dismantler and Recycler networks to reuse, refurbish, remanufacture, recycle and recover parts and materials embedded in ELVs. Also, the ELVs directive which has had an insignificant impact on Korean manufacturers has strong presence in the European market and has been successfully externalized on them. The Korean manufacturers not only achieve the 85% recycling target set by the ELVs directive but also meet the Extended Producer Responsibility (EPR) which requires manufacturers to contribute dismantling process. In order to improve the Korean vehicle dismantling and recycling system, the Automobile Management Act and the Resource Recirculation Act should be harmonized. Particularly the roles of the Ministry of Land, Infrastructure and Transport and the Minister of Environment should be sharply divided. Like Japan, the ELV management needs to be highly centralized, regulated, and controlled by the ministry specialized in Vehicle, namely the Ministry of Land, Infrastructure and Transport and the sub organizations. Like EU Members, recovery, reuse, and recycling must be distinguished. Recovery is defined as the final productive use of the parts and materials embedded in ELVs, which includes reuse and remanufacture of parts and recycling of the other materials. Dismantling process and reuse and remanufacture of parts must be governed by the Ministry of Land, Infrastructure and Transport. For environmental recycling or disposal of waste materials, such as CFCs, glass and plastic material, and toxic substances, governmental financial support system should be in place.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.169-173
• /
• 2008

This study is concerned with adopting the hydroforming method in the front axle of the commercial vehicle. Generally the front axle of the commercial vehicle is made bγ the several operations of press forging. This product supports the big weight of the vehicle and load. The weight of the press forging parts is also so more than it of the press parts of the passenger car. So, we have studied the hydroforming method to lessen the weight of the front axle of the commercial vehicle. To apply the hydroforming method in the commercial vehicle, we had to use the operation of reducing the diameter of the used tube prior to the hydorforming operation.

• 한국통신학회논문지
• /
• 제40권2호
• /
• pp.349-354
• /
• 2015

본 논문은 차량감지를 위해 자기센서를 이용하여 자기신호를 측정하고 형상을 분석한 결과에 관한 것이다. 자기센서는 하니웰사의 MR센서를 이용하였고, 센서의 성능을 알아보기 위해 3축의 길이가 1.2 m인 자기장 발생장치를 제작하여 자기장 감지능력을 측정하였다. 차량감지는 주행차로와 비 주행차로에 센서를 설치한 후 감지여부와 차체의 크기가 다른 7개 차량에 대해서 자기장을 측정하였다. 또한 SUV와 소형 차량의 주차구역과 비 주차구역에 센서를 설치하고 자기장 형상을 분석하였다. 마지막으로 차량의 각 부분별 자기장 형상을 측정하였다. 측정 결과 주행차로에 자기장 형상은 비 주행차로의 경우보다 자기장 첨두치가 크며 복잡한 형상을 보여 센서의 설치 위치로 주행차로와 주행차의 방향을 구분할 수 있었으며, 차체가 클수록 자기장의 변화가 커서 차량 종류를 식별할 수 있었다. 또한 차량의 각 부분별 자기장의 변화를 측정하여 형상을 분석하였다.