• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.89-96
• /
• 2017

PURPOSES: This study aims to develop a rational procedure for estimating the pavement roughness index considering vehicle wandering. METHODS : The location analysis of the passing vehicle in the lane was performed by approximately 1.2 million vehicles for verification of the wandering distribution. According to verification result, the distribution follows the normal distribution pattern. The probability density function was estimated using each lane's wandering distribution model. Then the procedure for applying a weighted value into the lane profile was conducted using this function. RESULTS : The modified index, MRIw, with consideration towards applying the wandering weighted value application was computed then compared with MRI. It was found that the Coefficient of Variation for distribution of lateral roughness index in the lane was high in the case of a large difference between each index (i.e., MRIw and MRI) observed. CONCLUSIONS : This result confirms that the new procedure with consideration of the weight factor can successfully improve the lane representative characteristics of the roughness index.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.689-694
• /
• 2018

최근 친환경 자동차 개발과 함께 대기 오염 문제 대응을 위해서 자동차 연비 개선은 차량 개발에 있어서 매우 중요하다. 개발 차량의 연비 향상을 위한 요소 중 차량 외관을 타고 흐르는 공기 흐름과 차량 후부에서의 공기 유동 현상은 중요한 요소이다. 특별히 SUV(Sports Utility Vehicle) 차량의 차량 후부 공기 유동은 리어 스포일러 설계 시 고려해야 하는 중요한 설계 항목 중 하나이다. 본 연구에서는 차량의 공기 유동에 영향을 주는 리어 스포일러의 제어 인자를 정하고 각 제어 인자의 공기 유동 특성에 대한 민감도를 시험을 통하여 비교 분석하고, 유동 저항력을 감소시킬 수 있는 스포일러의 최적 제어 인자를 결정하였다. 결정된 최적 제어 인자를 이용한 시험 모델을 만들어 시험평가하고 그 결과 값에 대한 S/N비와 평균값을 분석하여 제어 인자 값을 변경하였다. 변경된 최적 제어 인자 값을 이용한 개선 모델을 다시 제작하고 유동 시험을 실시하여 공기 저항력 감소 효과와 원가절감 효과를 확인하였다.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.241-246
• /
• 2015

The interest of New Renewable Energy is increasing globally because of the increment of the uncertainty for the energy's supply and demand, and the increment of the frequency in weather anomaly and its damages. One of the New Renewable Energies, Hydrogen receives attention as the future energy that can deal with global environment regulation. Fuel Cell Electric Vehicle (FCEV) is an environment-friendly vehicle that uses Hydrogen as fuel. The electric power for FCEV is generated by chemical reaction with Oxygen from the air and Hydrogen. Hyundai Motor Company (HMC) has developed a proprietary fuel cell system since 2005. In 2012, HMC is the first car maker that mass-produces the ix35 FCEV to the worldwide such as North America, Europe, etc. In order to develop and improve the FCEV technology, data acquisition and analysis of the driving vehicle information is essential. Therefore, the monitoring system is developed, which is consist of datalogger, Automatic Vehicle Location (AVL) server and main server. Especially, WCDMA technology is integrated into the system which enables the data analysis without any restriction of time and region. The main function of the system is the analysis of the driving pattern and the component durability, and the safety monitoring. As a result, ix35 FCEV has successfully developed by using the developed monitoring system. The system is going to take an advantage of development in the future FCEV technology.

• Journal of information and communication convergence engineering
• /
• 제17권1호
• /
• pp.84-90
• /
• 2019

Applications of unmanned aerial vehicles (UAVs) in the military environment have become popular because they require minimum human contribution and can avoid accidents during missions. UAVs are employed in various missions such as reconnaissance, observation, aggression, and protection. Consequently, counter-measures, known as anti-drone technologies, have been developed as well. In order to protect against threats from anti-drone technologies and enhance the survivability of UAVs, this study proposes an evasive measure. The proposed bio-inspired evasive maneuver of a UAV mimics a dragonfly's irregular flight. The unpredictable UAV movement is able to confuse enemies and avoid threats, thereby enhancing the UAV's survivability. The proposed system has been implemented on a commercial UAV platform (AR Drone 2.0) and tested in a real environment. The experiment results demonstrate that the proposed flight pattern has larger displacement values compared to a regular flight maneuver, thus making the UAV's position is difficult to predict.

• 한국항해항만학회지
• /
• 제32권10호
• /
• pp.805-811
• /
• 2008

이 논문은 차량용 사이드 미러에 적합한 광대역 RFID 태그안테나를 설계하고, 차체에 의한 지향성의 특성을 제시한다. 제안된 태그 안테나는 인식거리와 광대역 특성을 향상시키기 위해 대칭 구조로 설계되었다 제안된 태그 안테나($30\;mm{\times}24\;mm{\times}1\;mm$)는 910 MHz에서 공진하며 대역폭은 780 MHz($540\;MHz{\sim}1320\;MHz$)를 가진다. 칩 임피던스는 16 - $j131\;{\Omega}$이고, 상용 칩의 복소 공액 임피던스가 태그 안테나의 설계에 사용되었다. 제안된 태그 안테나는 차량의 사이드 미러의 내부에 위치한다. 사이드 미러의 유전율뿐만 아니라 차체(도체)에 대한 태그 안테나의 효과를 평가하기 위해, 지향패턴 측정과 인식거리가 계산되고 측정되었다. 차량용 RFID 시스템을 위한 최적의 위치가 사이드 미러 내부에서 관측되었으며, 계산된 결과들은 측정된 결과들과 잘 일치하였다.

• 한국정보처리학회논문지
• /
• 제7권9호
• /
• pp.3037-3047
• /
• 2000

본 논문에서는 커러영상처리로 차량 후면에 위치하고 붉은색을 띄는 미등과 브레이크등을 이용하여 저속주행환경에서 근거리 전방차량을 추적하는 방법에 대해 설명한다. HSV 컬러모델로 변환된 컬러영상에서 미등과 브레이크등의 컬러특징을 이용하여 후보영역을 분할한 후, 미등과 브레이크등 패턴의 기하학적 특징과 위치적 특징을 이용하여 한 쌍의 미등 혹은 브레이크등을 탐지한다. 탐지된 등의 위치를 이용하여 전방차량의 위치를 측정하고 연속적으로 추적한다. 또한, 등 영역내의 HSV 컬러요소 변화를 측정하여 전방차량의 브레이크 사용여부를 판단한다. 도심지의 도로영상을 이용한 실험에서 성공적으로 근거리 전방차량을 추적할 수 있었으며, 주간보다 야간에서 효과적으로 적용될 수 있었다. 또한 본 알고리즘이 구현된 컬러비전시스템을 무인자동차 KAV-III(Korea Autonomous Vehicle-III)에 탑재하여 야간에 자동으로 전방차량을 15km/h의 속도로 따라갈 수 있는 결과를 얻었다. 이 방법은 도심지에서 가다서다를 반복하는 저속주행환경에서 차량 스스로 운전하여 운전자의 부담을 줄일 수 있는 LSA(Low Speed Automation)시스템 개발에 적용될 수 있을 것이다.

• 대한기계학회논문집B
• /
• 제29권6호
• /
• pp.755-762
• /
• 2005

To evaluate the aerodynamic efficiency of TR-S2 configuration designed by SUDC, wind tunnel tests of $40\%$ scaled model were done in KARI LSWT. The aerodynamic characteristics of plain and Semi-Slotted Flaperon were compared, and vortex generators were installed to improve flow pattern along the wing surface. Effects of the control surface such as elevator, rudder, aileron, and incidence angle of horizontal tail are measured for various testing conditions. Test results showed that Semi-Slotted Flaperon produced more favorable lift, lift/drag, and stall margins and application of vortex generator would be best choice to enhance wing performance. Longitudinal, lateral and directional characteristics of TR-S2 were found to be stable for the pitch and yaw motions.

• 한국ITS학회 논문지
• /
• 제17권6호
• /
• pp.153-172
• /
• 2018

화물차량의 과적은 도로 포장의 파손 및 교량 등 도로구조물의 파괴, 대형 교통사고 발생 등의 주요한 원인 중 하나로서 오랜 시간동안 도로 교통 분야에서 중요한 연구분야였다. 본 연구에서는 과적 문제 해결을 위해 급속도로 발전하는 IT 및 빅데이터 활용기술을 접목하여 화물차량의 과적운행패턴 분석 및 차체부착중량계중시스템를 활용한 과적예방 효과를 분석하였다. 이를 위해 기존 화물차량과적 관련 문헌 조사와 상용 차체부착중량계중시스템 기술 조사를 진행하였으며, 과적적발 정보 분석을 통해서 대표적인 과적차량의 유형을 선정하였다. 과적유형에 맞는 차량을 10대 선정, 차체부착중량계중시스템을 설치함으로써 화물차량의 정보를 실시간으로 모니터링하여 연구 데이터를 수집하였다. 화물차량의 축중량과 총중량 데이터는 상하차 작업횟수 대비 과적비율 등으로 분석하였으며, 차체부착중량계중시스템 유무에 따른 그 변화추이를 확인하여 차체부착중량계중시스템 적용의 과적예방효과를 확인할 수 있었다. 다만, 시험차량 표본수가 전체를 대표할 수 있을 정도로 충분하지 못하기 때문에 향후 확대 시험을 통해서 추가적인 연구가 가능할 것으로 판단된다.

• Journal of Preventive Medicine and Public Health
• /
• 제27권3호
• /
• pp.447-463
• /
• 1994

Despite the public health importance of injury and poisoning in terms of its high mortality and incidence, epidemiologic information to be utilized are scarce in Korea. This study was carried out in 1990 on a representative sample population (about 55,000 persons) along with the 6th National Tuberculosis Prevalence Survey in order to estimate the magnitude of injury and poisoning occurrence and to identify its epidemiologic characteristics which can be aided for establishing preventive strategy. Pre-tested and structured Questionnaire was used by trained interviewer to collect data including general information of the person, various information on the injury and poisoning during the past one year such as time and place of its occurrence, its nature and external causes, type of medical institute attended, duration of treatment and outcome of the accident occured. In analysis of the data collected incidence rates per 1000 persons by sex, age group and its nature as well as external causes, and relative frequencies were calculated. The result obtained are as followings; 1. The incidence rate per 1000 was 30 for both sexes, 39 for male and 22 for female, male being 1.8 times more frequent than female. Age adjusted incidences were not much different from the crude rates. Age group specific rate curve showed bimodal shape in both sexes, small peaks in preschool children and higher peaks in older ages. The incidence rate per 1000 people by area was highest in Jeon-bug province (57/1000) and the lowest in Daegu city(11/1000). 2. The place where the injuries occured were road in 46%, within the boundary of house in 25%, and working place in 12% The injuries and poisoning had occured more frequently during the months from March to August of the year than other months. 3. The relatively frequent injuries by its nature were contusion with intact skin surface (19%), fracture of upper limb (13%), open wound of head, neck and trunk (12%) and fracture of lower limb (11%) among males; contusion with intact skin surface (28%), sprains and strains of joints and adjacent muscle (14%), fracture of upper limb (10%) and fracture of lower limb (9%) among females. Higher incidence rate among males than females were fracture of skull (4.5 times), open wound and fractures of limbs ($2{\sim}3$ times). Age specific rate of injuries and poisoning by its nature showed increasing pattern by age in fractures of upper and lower limbs and sprains & strains of joints whereas the age group of 30's showed highest incidence in open wounds of upper limb. Fractures of radius and ulna in upper limb, fractures of tibia & fibula and ankle in lower limb were most frequent among fractures of upper and lower limbs. The frequent injuries among sprains and strains of joints and adjacent muscles were that of ankle, foot and back, and among open wound were that of head and fingers. 4. Relative frequency of injuries and poisoning by external causes showed following order : other accidents (25%), accidental falls (23%), motor vehicle accident (22%) and other road vehicle accident (14%) among males and accidental falls (37%), motor vehicle accident (24%) and other accident (18%) among females. The external causes revealing higher incidences among males than females, were other road vehicle accident (4.8 times), vehicle accident not elsewhere classifiable (4.4 times), accidental poisoning (4.4 times), accidents due to natural and environmental factors (2.8 times), and sucide & self-inflicted injuries (2.8 times). Age specific incidence by external causes for frequent injuries showed that incidence of other accident steadily increased from 10's till age 50's; motor vehicle traffic accident increased from age 20's and dropped after age 60's; on the other hand accidental fall increased strikingly by age. The most frequent external causes among motor vehicle traffic accidents was motor vehicle traffic accident involving collision with pedstrain (69%), pedal cycle accident (30%) and other road vehicle accident (71%) among other road vehicle accidents; falls on same level from slipping, tripping or standing (44%) and other falls from one level to another among accidental falls; accidents caused by machinary (32%) for male and striking against or struck accidentally by objects or person for female among other accidents. 5. Seventy nine percent of the injuries and poisonings were treated in general hospital or hospital/clinic. The duration of treatment ranged from a few days to 123 weeks; the majority(52%) took under 2 weeks, 36% for $3{\sim}8$ weeks and 4% over 21 weeks. 6. The accident resulted in full recovery of normal healthy state in 62%, residual functional defects in 21% and on process of treatment in 16%.