• Archives of Craniofacial Surgery
• /
• v.22 no.2
• /
• pp.115-118
• /
• 2021

Intramuscular hemangioma is a rare vascular benign proliferation that can occur within any muscle, particularly in the trunk and extremities. In the head and neck region, the masseter muscle is most commonly involved, followed by the periorbital and sternocleidomastoid muscles. Diagnosing intramuscular hemangioma is challenging because there are no characteristic symptoms; instead, magnetic resonance imaging is the best imaging modality to diagnose these lesions. Complete surgical resection is the treatment of choice, although the local recurrence rate is high. Herein, we report a rare case of intramuscular hemangioma located in the zygomaticus minor muscle, which is related to smiling and usually runs along the orbicularis oculi muscle. Distinguishing or separating these two muscles is challenging. However, based on the muscle vector of the midface and radiological findings, the two muscles were successfully separated. The zygomaticus minor was cut very slightly to approach to the lesion and the muscle fibers were split to excise it. A follow-up examination revealed no nerve damage or muscle dysfunction at 4 weeks postoperatively. This rare case may serve as a reference for managing intramuscular hemangioma in the head and neck region.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1563-1571
• /
• 2009

In this paper, we propose a new boundary matching method for the temporal error concealment and a post processing algorithm for perceptual quality improvement of the concealed frame. Temporal error concealment is a method that substitutes error blocks with similar blocks from the reference frame. In conventional H.264/AVC standard, it compares outside pixels of erroneous block with inside pixels of reference block to find the most similar block. However, it is very possible that the conventional method substitutes erroneous block with the wrong one because it compares only narrow spatial range of pixels. In this paper, for substituting erroneous blocks with more correct blocks, we propose enhanced boundary matching method by comparing inside and outside pixels of reference block with outside pixels of erroneous block and setting up additional candidate motion vector in the fixed search range based on maximum and minimum value of candidate motion vectors. Furthermore, we propose a post processing method to smooth edges between concealed and decoded blocks without error by using the modified deblocking filter. We identified that the proposed method shows quality improvement of about 0.9dB over the conventional boundary matching methods.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.41-47
• /
• 2016

High efficiency video coding (HEVC) employs a coding tree unit (CTU) to improve the coding efficiency. A CTU consists of coding units (CU), prediction units (PU), and transform units (TU). All possible block partitions should be performed on each depth level to obtain the best combination of CUs, PUs, and TUs. To reduce the complexity of block partitioning process, this paper proposes the PU mode skip algorithm with region of interest (RoI) selection using motion vector. In addition, this paper presents the CU depth level skip algorithm using the co-located block information in the previously encoded frames. First, the RoI selection algorithm distinguishes between dynamic CTUs and static CTUs and then, asymmetric motion partitioning (AMP) blocks are skipped in the static CTUs. Second, the depth level skip algorithm predicts the most probable target depth level from average depth in one CTU. The experimental results show that the proposed fast CU decision algorithm can reduce the total encoding time up to 44.8% compared to the HEVC test model (HM) 14.0 reference software encoder. Moreover, the proposed algorithm shows only 2.5% Bjontegaard delta bit rate (BDBR) loss.

• Journal of KIISE:Software and Applications
• /
• v.31 no.1
• /
• pp.71-81
• /
• 2004

Minutiae-based fingerprint identification systems use minutiae points, which cannot completely characterize local ridge structures. Further, this method requires many methods for matching two fingerprint images containing different number of minutiae points. Therefore, to represent the fired length information for one fingerprint image, the filterbank-based method was proposed as an alternative to minutiae-based fingerprint representation. However, it has two shortcomings. One shortcoming is that similar feature vectors are extracted from the different fingerprints which have the same fingerprint type. Another shortcoming is that this method has overload to reduce the rotation error in the fingerprint image acquisition. In this paper, we propose the minutia-weighted feature vector extraction method that gives more weight in extracting feature value, if the region has minutiae points. Also, we Propose new fingerprint alignment method that uses the average local orientations around the reference point. These methods improve the fingerprint system's Performance and speed, respectively. Experimental results indicate that the proposed methods can reduce the FRR of the filterbank-based fingerprint matcher by approximately 0.524% at a FAR of 0.967%, and improve the matching performance by 5% in ERR. The system speed is over 1.28 times faster.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2019

With the development of remote sensing sensor technology, it has become possible to acquire satellite images with various spectral information. In particular, since the hyperspectral image is composed of continuous and narrow spectral wavelength, it can be effectively used in various fields such as land cover classification, target detection, and environment monitoring. Change detection techniques using remote sensing data are generally performed through differences of data with same dimensions. Therefore, it has a disadvantage that it is difficult to apply to heterogeneous sensors having different dimensions. In this study, we have developed a change detection method applicable to hyperspectral image and high spat ial resolution satellite image with different dimensions, and confirmed the applicability of the change detection method between heterogeneous images. For the application of the change detection method, the dimension of hyperspectral image was reduced by using correlation analysis and principal component analysis, and the change detection algorithm used CVA. The ROC curve and the AUC were calculated using the reference data for the evaluation of change detection performance. Experimental results show that the change detection performance is higher when using the image generated by adequate dimensionality reduction than the case using the original hyperspectral image.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.112-121
• /
• 1997

In this paper, we study a model parameter compensation method for noise-robust speech recognition. We study model parameter compensation on a sentence by sentence and no other informations are used. Parallel model combination(PMC), well known as a model parameter compensation algorithm, is implemented and used for a reference of performance comparision. We also propose a modified PMC method which tunes model parameter with an association factor that controls average variability of gaussian mixtures and variability of single gaussian mixture per state for more robust modeling. We obtain a re-estimation solution of environmental variables based on the expectation-maximization(EM) algorithm in the cepstral domain. To evaluate the performance of the model compensation methods, we perform experiments on speaker-independent isolated word recognition. Noise sources used are white gaussian and driving car noise. To get corrupted speech we added noise to clean speech at various signal-to-noise ratio(SNR). We use noise mean and variance modeled by 3 frame noise data. Experimental result of the VTS approach is superior to other methods. The scheme of the zero order VTS approach is similar to the modified PMC method in adapting mean vector only. But, the recognition rate of the Zero order VTS approach is higher than PMC and modified PMC method based on log-normal approximation.

• KDI Journal of Economic Policy
• /
• v.26 no.2
• /
• pp.281-314
• /
• 2004

This paper theoretically formulated and empirically explored the relationship between exchange rate pass-through (ERPT) for (average) market price and an individual country's price, using steel products data in the US market, with special reference to two major steel exporting countries, Korea and Japan. It was found that the direction of market ERPT can be different from that of individual ERPT that each exporter experiences, due to strategic interactions among producers and different parameters. Vector error correction (VEC) models and impulse response analysis were used with the statistical inference based on the bootstrap-after- bootstrap of Kilian (1998) for short-run, and the fully modified estimation of Phillips and Hansen (1990) was used for long-run. Empirical results indicate that market ERPT in the US market due to changes in Korea-US exchange rates is different from those due to changes in Japan-US exchange rates. The framework developed in this study indicates that this phenomenon is attributed to either (i) the two countries have individual ERPTs of different magnitudes and directions for the products in the US market, or (ii) the pricing strategies of the other exporters' (to the US steel market) respond differently depending on whether the price of the product from Korea changes or that from Japan does. As each exporter's ERPT can be significantly different, and market response to each country's ERPT can be also different, this study concludes that it is crucial for an exporter to understand how competitors in the market respond to changes in its price, as well as to understand how its price changes when the relevant exchange rate fluctuates.

• Steel and Composite Structures
• /
• v.47 no.1
• /
• pp.91-102
• /
• 2023

To study the evaluation standard and control limit of mortar filling layer void length, in this paper, the train sub-model was developed by MATLAB and the track-bridge sub-model considering the mortar filling layer void was established by ANSYS. The two sub-models were assembled into a train-track-bridge coupling dynamic model through the wheel-rail contact relationship, and the validity was corroborated by the coupling dynamic model with the literature model. Considering the randomness of fastening stiffness, mortar elastic modulus, length of mortar filling layer void, and pier settlement, the test points were designed by the Box-Behnken method based on Design-Expert software. The coupled dynamic model was calculated, and the support vector regression (SVR) nonlinear mapping model of the wheel-rail system was established. The learning, prediction, and verification were carried out. Finally, the reliable probability of the amplification coefficient distribution of the response index of the train and structure in different ranges was obtained based on the SVR nonlinear mapping model and Latin hypercube sampling method. The limit of the length of the mortar filling layer void was, thus, obtained. The results show that the SVR nonlinear mapping model developed in this paper has a high fitting accuracy of 0.993, and the computational efficiency is significantly improved by 99.86%. It can be used to calculate the dynamic response of the wheel-rail system. The length of the mortar filling layer void significantly affects the wheel-rail vertical force, wheel weight load reduction ratio, rail vertical displacement, and track plate vertical displacement. The dynamic response of the track structure has a more significant effect on the limit value of the length of the mortar filling layer void than the dynamic response of the vehicle, and the rail vertical displacement is the most obvious. At 250 km/h - 350 km/h train running speed, the limit values of grade I, II, and III of the lengths of the mortar filling layer void are 3.932 m, 4.337 m, and 4.766 m, respectively. The results can provide some reference for the long-term service performance reliability of the ballastless track-bridge system of HRS.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.1
• /
• pp.13-20
• /
• 2004

In this paper, we have analyzed the current MPEG-4 video encoding tools and proposed efcient coding techniques that reduce the complexity of the encoder. Until recently, encoder optimization without shape coding has been a major concern in video for wire/wireless low bit rate coding services. Recently, we found out that the computational complexity of MPEG-4 shape coding plays a very important role in the object-based coding through experiments. We have made an experiment whether we could get optimized object-based coding method through successfully combining latest optimized texture coding techniques with our proposed optimized shape coding techniques. In texture coding, we applied the MVFAST method for motion estimation. We chose not to use IVOPF(Intelligent VOP Formation) but to use TRB(Tightest Rectangular Boundary) for positioning VOP and, finally, to eliminate the spiral search of shape motion estimation to reduce the complexity in shape coding. As a result of experiment, our proposed scheme achieved improved time complexity over the existing reference software by $57.3\%$ and over the optimized method on which only shape coding was applied by $48.7\%$, respectively.

• The Journal of the Korean Society for Microbiology
• /
• v.35 no.3
• /
• pp.263-271
• /
• 2000

A clinical isolate of Klebsiella pneumoniae K7746 produced the extended-spectrum ${\beta}$-lactamase (ESBL) SHV-12. A 6.6 kb BamHI fragment containing the $bla_{SHV-12}$ gene of K7746 strain was cloned into pCRScriptCAM vector resulting in the recombinant plasmid p7746-Cl. The restriction map of 3.6 kb inserted DNA and sequences immediately surrounding $bla_{SHV-12}$ of p7746-C1 were homologous to plasmid pMPA2a carrying $bla_{SHV-2a}$. In addition, both $bla_{SHV-12}$ and $bla_{SHV-2a}$ were expressed from a common hybrid promoter made of the -35 region derived from the left inverted repeat of IS26 and the -10 region from the $bla_{SHV}$ promoter itself. The results indicate that $bla_{SHV-12}$ and $bla_{SHV-2a}$ may have evolved from a common ancestor in the sequential order of $bla_{SHV-2a}$ first, followed by $bla_{SHV-12}$. Furthermore, by the PCR mapping method using primers corresponding to the IS26 and $bla_{SHV}$, the association between IS26 and $bla_{SHV}$ was studied in 12 clinical isolates carrying $bla_{SHV-2a}$, 27 clinical isolates carrying $bla_{SHV-12}$, and 5 reference strains carrying $bla_{SHV-1}$ to $bla_{SHV-5}$. All 39 strains carrying $bla_{SHV-2a}$ or $bla_{SHV-12}$ were positive by the PCR, providing confirmative evidence that IS26 has been involved in the evolution and dissemination of $bla_{SHV-2a}$ and $bla_{SHV-12}$. But 5 reference strains carrying $bla_{SHV-1}$ to $bla_{SHV-5}$ were negative by the PCR. Therefore, we concluded that the molecular evolutionary pathway of $bla_{SHV-2a}$ and $bla_{SHV-12}$ may be different from that of other $bla_{SHV-ESBL}$, e.g., $bla_{SHV-2}$, $bla_{SHV-3}$, $bla_{SHV-4}$, and $bla_{SHV-5}$.