• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.7
• /
• pp.742-752
• /
• 1992

In this paper, a space vector concept is generalized for PWM(pulse-width modulated) inverters and PWM rectifiers with current link and voltage link respectively. Through representing three-phase variables as a space vector, we propose space vector modulations for PWM voltage and current source inverters, and PWM rectifiers with current link and voltage link. For these types, switching states of the switches are systematically analyzed from tables. It is shown in three-phase PWM rectifiers that power factor of the line current and output dc voltage can be controlled arbitrarily. The PWM rectifier with current link is also given as an example system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.500-503
• /
• 1997

In this paper, we investigate the control methodology of inverter Airconditioner, using the three dimensional vector scheme. The method of three dimensional vector aims at the determination of optimal switching patterns for PWM to reduce switching loss and to improve the performance supplied voltage. The induction motors are widely used for home Airconditioners. These motors can be classified into two types: on or off control of Airconditioner and the speed control of motor. For speed control of motors, generally PWM methods are used. The PWM method based upon the modulation of triangular wave can not afford to supply line voltage to the motor sufficiently because of the capacity of processing speed of micro processors. Therefore airconditioner can not be operated efficiently. This problem can be solved with the method of three dimensional vector since it can increase the supplied voltage and maximum operating frequency of motor to 173V and 96Hz, respectively. As the result, this method shows 10 - 15% increase of voltage and 10% increase of operating frequency over the modulation of triangular wave. According to a theoretical study, the number of switching in the method of three dimensional vector is smaller than that of the modulation of triangular wave. The power consumption can be reduced and the supplied voltage can be increased. In other words, the efficiency of Airconditioner can be improved. We show that the method of three dimensional vector can supply higher voltage than the modulation of triangular method through the experiments and verify the degree of improvement of efficiency theoretically.

• Biomedical Science Letters
• /
• v.9 no.2
• /
• pp.67-74
• /
• 2003

Viral and non-viral vectors have been used in the delivery of genetic materials into animal cells and tissues, with each approach having pros and cons. Non-viral vectors have many useful merits such as easy preparation, low immunity and size tolerance of a transgene when compared to those of viral vectors. Delivery specificity may be achieved by complex formation between receptor ligands and a non-viral vector. In the present study, non-viral vector systems are investigated in an effort to find a practical delivery means for gene therapy, Receptor-ligand interaction between transferrin-receptor and transferrin was utilized for efficient gene transfer into cancer cells. A plasmid vector, pcDNA3 (LacZ) was ligated with a small duplexed oligo fragment in which a Biotin- VN$^{TM}$ phosphoramidite was placed in the middle of the oligo. The plasmid vector labeled by biotin was then conjugated with biotin-labeled transferrin via streptavidin. This trimeric conjugates were delivered to a hepatoma cell line, HepG2. The delivery efficiency of the trimeric conjugate was 2-fold higher than that of cationic liposomes used for transfection of a plasmid vector. These results demonstrate that a plasmid vector can be efficiently transferred into cells by forming a trimeric complex of plasmid vector-linker-ligand.

• The Bulletin of The Korean Astronomical Society
• /
• v.22
• /
• pp.12.1-12.1
• /
• 1997

• Journal of Microbiology
• /
• v.37 no.2
• /
• pp.86-89
• /
• 1999

An OTHBVS cell line from HepG2 was established. This cell line stably expresses the human hepatitis B virus (HBV) middle S protein that includes the preS2 region which is important for HBV particle entry into the hepatocyte. To establish this cell line, the middle S open reading frame (ORF), with a promoter located in the 5' region and enhancer located in the 3' region, was cloned downstream from the metallothionine (MT) promoter of the OT1529 vector. In this vector, expression of the middle S protein was constructed to be regulated by its own promoter and enhancer. Expression of the large S protein which contains the preS1 region in addition to the middle S protein was designed to be regulated by the MT promoter. When extracts of OTHBVS cells were examined with an S protein detection kit (RPHA, Korea Green Cross Co.), an S protein was detected. Total mRNA of OTHBVS cell examined by northern blot analysis with an S ORF probe revealed small/middle S transcripts (2.1 kb). When the MT promoter was induced by Zn, large S transcripts (2.4 kb) were detected. The GP36 and GP33 middle S proteins were presumably detected, but large S proteins were not detected by immunostain analysis using anti-preS2 antibody.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.285-292
• /
• 2010

This paper presents a current mode integrated control technique (CM-ICT) using a modified voltage space vector modulation (MSVM) for Z-source inverter (ZSI) fed induction motor drives. MSVM provides a better DC voltage boost in the dc-link, a wide range of AC output voltage controllability and a better line harmonic profile. In a voltage mode ICT (VM-ICT), the outer voltage feedback loop alone is designed and it enforces the desired line voltage to the motor drive. An integrated control technique (ICT), with an inner current feedback loop is proposed in this paper for the purpose of line current limiting and soft operation of the drive. The current command generated by the PI controller and limiter in the outer voltage feedback loop, is compared with the actual line current, and the error is processed through the PI controller and a limiter. This limiter ensures that, the voltage control signal to the Z-source inverter is constrained to a safe level. The rise and fall of the control signal voltage are made to be gradual, so as to protect the induction motor drive and the Z-source inverter from transients. The single stage controller arrangement of the proposed CM-ICT offers easier compensation. Analysis, Matlab/Simulink simulations, and experimental results have been presented to validate the proposed technique.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.194-200
• /
• 2020

Human detection is an important aspect in many video-based sensing and monitoring systems. Studies have been actively conducted for the automatic detection of humans in camera images, and various methods have been proposed. However, there are still problems in terms of performance and computational cost. In this paper, we describe a method for efficient human detection in the field of view of a camera, which may be static or moving, through multiple processing steps. A detection line is designated at the position where a human appears first in a sensing area, and only the one-dimensional gray pixel values of the line are monitored. If any noticeable change occurs in the detection line, corner detection and optical flow computation are performed in the vicinity of the detection line to confirm the change. When significant changes are observed in the corner numbers and optical flow vectors, the final determination of human presence in the monitoring area is performed using the Histograms of Oriented Gradients method and a Support Vector Machine. The proposed method requires processing only specific small areas of two consecutive gray images. Furthermore, this method enables operation not only in a static condition with a fixed camera, but also in a dynamic condition such as an operation using a camera attached to a moving vehicle.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.399-405
• /
• 2009

This paper proposes a design of attenuator based on meta-material structure and its application. The unit-cell attenuator based on the lossy transmission line consists of the CRLH(Composite Right/Left Handed) transmission line and PIN diodes to be controlled internal loss according to diode bias voltage to change resistance of diode. Also, to reduce the initial losses, there is used parallel connection of PIN diodes. To increase attenuations, it is connected a cascade unit-cell of attenuator with periodic structure. The attenuation quantities of unit-cell are about 10dB and phase variations are 15o maximum at 1.5 GHz ~ 2.5 GHz. Also, its application is represented a vector modulator.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.665-670
• /
• 2014

A SVM is a kind of binary classifier in order to find optimal hyperplane which separates training data into two groups. Due to its remarkable performance, the SVM is applied in various fields such as inductive inference, binary classification or making predictions. Also it is a representative black box model; there are plenty of actively discussed researches about analyzing trained SVM classifier. This paper conducts a study on a method that is automatically detecting the line-shaped echoes, sun strobe echo and radial interference echo, using the SVM algorithm because the line-shaped echoes appear relatively often and disturb weather forecasting process. Using a spatial clustering method and corrected reflectivity data in the weather radar, the training data is made up with mean reflectivity, size, appearance, centroid altitude and so forth. With actual occurrence cases of the line-shaped echoes, the trained SVM classifier is verified, and analyzed its characteristics using the decision tree method.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.36-43
• /
• 1997

In order to express the FLP recombinase in B. mori cultured cell line, BmN-4, transient expression system using a heat shock protein gene (hsp70) promoter of Dorosophilla melnogaster was constructed. This vector was designated as pHsSV. Activity strength of the hsp70 promoter was compared with that of immediate early gene (IE-1) and polyhedrin gene of BmNPV employing the E. coli $\beta$-galactosidase gene as a reporter gene. The result showed that the pHs $\beta$-gal plasmid vector expressed the $\beta$-galactosidase at 2nd and 3rd day after the transfer of plasmid DNA into BmN-4 cells, which was similar to that of pIE1 $\beta$-gal vector, but different from that of a recombinant virus, vBm $\beta$-gal. For the construction of FLP recombinase transient expression vector, the FLP recombinase gene was cloned by polymerase chain reaction technique. To express the FLP recombinase, this gene was inserted into pHsSV plasmid vector, under the control of the hsp70 promotor, and tranfected in BmN-4 cells. The expressed FLP recombinase was estimated at 44kDa on a 12.5% SDS-PAGE.