• 원예과학기술지
• /
• 제16권3호
• /
• pp.355-357
• /
• 1998

무궁화 (Hibiscus syriacus 'Honghwarang')의 휴면특성을 구명하고자 온도와 생장조절물질을 처리하여 맹아(萌芽) 차이를 비교하였다. 맹아는 온도가 높을수록 빨랐으며($10{\sim}30^{\circ}C$), $30^{\circ}C$ 무처리구는 삽목 후 4일만에 맹아하기 시작하여 6일경에는 100% 맹아했다. GA와 BA처리도 대조구인 무처리와 큰 차이 없이 $20^{\circ}C$ 이상의 온도에서는 6일만에 맹아하여 62.5%의 높은 맹아율을 나타내었다. ABA 침지처리는 $25^{\circ}C$이하의 온도에서는 맹아율이 저조하였으나, $25^{\circ}C$이상의 온도에서는 삽목 6일 후에 맹아하기 시작하여 12일 후에 93% 맹아되어, 고온 조건에서는 생장억제제인 ABA처리가 맹아억제에 전혀 효과가 없었다.

• 한국지반환경공학회 논문집
• /
• 제14권7호
• /
• pp.19-29
• /
• 2013

동토지역에서 지반의 역학적인 특징은 기존 토질역학이론과 다르기 때문에 동토지반 내 응력분포와 파괴조건을 묘사하기 위하여 기존 토질역학을 동토에 적용하는 것은 효과적이지 못하거나 적합하지 않다고 할 수 있다. 따라서, 동토지역에서 구조물의 설계 및 시공을 위해서는 동토역학에 관한 기술 자료의 수집 및 분석, 그리고 체계적이고 전문화된 연구가 필수적으로 요구된다. 극한지에서 나타나는 영구동토지역은 계절에 따라 활동층이 동결 융해를 반복하게 되며, 이에 따라 구조물에 영향을 끼치는 하중조건 또한 변화된다. 특히, 동토의 역학적인 성질들은 온도, 함수비, 입도분포, 상대밀도, 하중을 가하는 속도에 따라 민감하게 반응하기 때문에 동토지역 구조물 설계 및 시공에 있어 다양한 조건에 따른 동토의 역학적인 특징들을 신뢰성 있게 분석할 수 있는 방법이 필수적으로 요구된다. 본 연구에서는 동토의 전단강도 특성을 분석하기 위하여 영하 30도에서 작동 가능한 직접전단시험장비와 대형 냉동 챔버를 활용하였으며, 동결온도, 수직응력, 함수비 및 상대밀도를 달리하여 화강풍화토의 전단강도 특성을 분석하였다. 본 연구에 따르면 수직응력, 함수비 및 상대밀도는 동결온도 조건하에서 화강풍화토의 전단강도 특성에 영향을 끼치는 것으로 나타났다.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.133-138
• /
• 2009

The $Nd_{1+x}Ba_{2-x}Cu_3O_{7-{\delta}}$(Nd123) superconductor exhibits high performance in high magnetic field and high temperature. We have studied phase stability for Nd123 under reduced oxygen partial pressure and various heat-treatment conditions. The main phase is Nd123 and some samples contain small amounts of Nd422 depending on the temperature and oxygen partial pressure. The decomposition temperature decreases with decreasing oxygen partial pressure from $1052^{\circ}C(P(O_2)$=150 Torr) to about $845^{\circ}C(P(O_2)$=0.1 Torr). The liquidus line was steeper temperature with decreasing oxygen partial pressure. In same condition of oxygen partial pressure, the region of stable Nd123 phase was formed at slightly higher temperature than the region of stable YBCO phase.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권2호
• /
• pp.187-192
• /
• 2004

In this paper, we proposed the method to design fuzzy controller using the experience of the operating expert and experimental numeric data for the robust control about the noise and disturbance instead of the traditional PID controller for the main steam temperature control of the thermal power plant. The temperature of main steam temperature process has to be controlled uniformly for the stable electric power output. The process has the problem of the hunting for the cases of various disturbances. In that case, the manual action of the operator happened to be introduced in some cases. We adopted the TSK (Takagi-Sugeno-Kang) model as the fuzzy controller and designed the fuzzy rules using the informations extracted directly from the real plant and various operating condition to solve the above problems and to apply practically. We implemented the real fuzzy controller as the Function Block module in the DCS(Distributed Control System) and evaluated the feasibility through the experimental results of the simulation.

• 한국조리학회지
• /
• 제20권2호
• /
• pp.54-64
• /
• 2014

레토르트 처리한 양파의 조직감(견고성)을 향상시키기 위하여 칼슘용액에서 장시간 저온(LTLT)블랜칭을 실시하였다. 칼슘용액에서 예비 열처리한 양파는 일반적인 블랜칭과 비교시 고온 멸균한 후 양파의 조직감이 의미있게 향상되었다. LTLT 블랜칭에 의한 견고성의 향상은 양파 조직의 pectin methylesterase(PME) 작용으로 carboxyl 그룹과 2가 양이온($Ca^{2+}$)간의 강한 가교결합과 관련이 있다. 0.5% 칼슘용액에서 $70^{\circ}C$, 120분동안 예비 열처리를 행하였을 때 가장 높은 견고성을 가진 레토르트 처리된 양파를 얻을 수 있었다. 이 같은 결과는 양파에서 PME의 활성도와 결합된 칼슘의 함량이 $70^{\circ}C$에서 가장 높았다는 것을 의미한다. 또한, $Mg^{2+}$와 같은 여러 2가 양이온을 함유하고 있는 알칼리 계통 칼슘이 펙틴 분자를 상온에서 가수분해하는 기작이 효소 작용에 더해져 여러 칼슘용액 중에서 레토르트 처리된 양파의 조직감을 가장 견고하게 하였다. 향후 여러 가지 레토르트 처리된 야채들의 조직 연화 방지를 위한 최적조건 실험이 야채별로 더 많이 수행되어야 할 것이다.

• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.839-850
• /
• 2002

A performance simulation program for the turboprop engine (PT6A-62), which is the power plant of the first Korean indigenous basic trainer KT-1, was developed for performance prediction, development of an EHMS (Engine Health Monitoring System) and the flight simulator. Characteristics of components including compressors, turbines, power turbines and the constant speed propeller were required for the steady state and transient performance analysis with on and off design point analysis. In most cases, these were substituted for what scaled from similar engine components'characteristics with the scaling law. The developed program was evaluated with the performance data provided by the engine manufacturer and with analysis results of GASTURB program, which is well known for the performance simulation of gas turbines. Performance parameters such as mass flow rate, compressor pressure ratio, fuel flow rate, specific fuel consumption and turbine inlet temperature were discussed to evaluate validity of the developed program at various cases. The first case was the sea level static standard condition and other cases were considered with various altitudes, flight velocities and part loads with the range between idle and 105% rotational speed of the gas generator. In the transient analysis, the Continuity of Mass Flow Method was utilized under the condition that mass stored between components is ignored and the flow compatibility is satisfied, and the Modified Euler Method was used for integration of the surplus torque. The transient performance analysis for various fuel schedules was performed. When the fuel step increase was considered, the overshoot of the turbine inlet temperature occurred. However, in case of ramp increase of the fuel longer than step increase of the fuel, the overshoot of the turbine inlet temperature was effectively reduced.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.637-641
• /
• 2006

Although chiral separation has been one of the main topics of chromatographic practice for over twenty-five years, it still presents many difficulties. In this work, the ultrasonic dependence of chiral resolution was investigated at various temperatures to improve resolution and reduce analysis time. The chiral resolution was performed on recently commercialized two HPLC chiral stationary phases (CSP 1 and CSP 2) with the analogues of racemic N-acylnaphthylethylamines (1a-d) and racemic amino acid derivatives (2a-c, 3a-c) as analytes. The CSP 1 was prepared from a (R)-N-(3,5-dinitrobenzoyl)phenylglycinol and the CSP 2 was prepared from a (S)-N-3,5-(dinitrobenzoyl) leucine. From the comparison of the chromatographic results under sonic condition with those under non-sonic condition, we found that the ultrasound decreased the elution time in chiral chromatography at all temperatures and improved the enantioselectivity at high temperature (45, 50, 60 ${^{\circ}C}$).

• 에너지공학
• /
• 제25권4호
• /
• pp.184-189
• /
• 2016

$CO_2$ 배출 규제와 에너지 소비 절감의 요구가 늘어남에 따라, 버려지는 열을 수확하여 전기를 생산하기 위한 열전발전 연구가 최근 활발히 이루어지고 있다. 본 연구에서는 폐열 에너지 회수장치로 사용하기 위한 열전모듈의 발전 특성을 분석하였다. Bismuth telluride로 제작된 열전모듈에 다양한 온도 조건을 부여하며 이에 따른 열전 거동을 분석하였다. 또한 다양한 온도 조건에서의 열전모듈의 발전 효율을 실험 및 이론에 의해 분석하였다. 이로 부터, 열전모듈로 열에너지를 보다 효율적으로 회수하기 위한 최적의 작동조건을 제시하였다.

• 수산해양교육연구
• /
• 제22권4호
• /
• pp.501-507
• /
• 2010

The ceramic contained paint was made to replace the lead sinker for gill-net with coated lead sinker. The ceramic contained paints were coated in various conditions on the lead sinker with 19g of weight and the optimal coating condition was studied. The adaptability of the coated lead sinker was checked through the anti durability test and fishing operation with gill-net. The case of "Main material 70 wt% + Urethane thinner 30 wt% (Main material 700 $m{\ell}$ + Thinner 300 $m{\ell}$)" showed the best in the coating characteristics depending on the combination ratio of the ceramic paint contained. The coated lead sinker dried at $100^{\circ}C$ inside oven was superior to the drying in the room temperature in its surface glossiness and anti durability and faster drying time than the one dried in normal temperature. The quadruple layers of coating on lead sinker with 4 times of dipping and drying application showed the super anti durability in the coating characteristics depending on the frequency of dipping. When press is applied to the coated lead sinker, the coated layer is not detached from the sinker. In addition, the coated lead sinker was not damaged or peeled at the fishing operation about 2 months in various depths within 50m and by the materials at the bottom (sand, stone and gravel stone) and it was in good condition.

• 설비공학논문집
• /
• 제23권7호
• /
• pp.505-512
• /
• 2011

Recently, many researchers have analyzed the performance of the transcritical $CO_2$ refrigeration cycle in order to identify opportunities to improve the system energy efficiency. The reduction of the expansion process losses is one of the key issues to improve the efficiency of the transcritical $CO_2$ refrigeration cycle. In this study, the analytical study on the performance characteristics of $CO_2$ cycle with an ejector carried out with a variation of outdoor temperature, gascooler inlet air velocity, evaporator inlet air velocity, and evaporator inlet air temperature. As a result, the system performance could be improved over 85% by using an ejector for various operating condition because of the reduction of compressor work. Moreover, the cooling capacity increased about 18% for variable outdoor condition. Therefore, the high performance of an ejector system could be maintained for wide operating conditions and system reliability could be improved compared to that of a basic system.