• Journal of Advanced Marine Engineering and Technology
• /
• 제31권1호
• /
• pp.34-43
• /
• 2007

As a method to improve the poor torque capacity on the continuously variable transmission(CVT), power splitted devices(PSD) reducing the power entering into the transmission has been considered. But this kind of PSD requires for the variator to be a large coverage of the speed ratio (CSR) Since the CSRs of the well-known push belt or the toroidal ones are not enough large, the power splitted CVTs (PSCVTs) using them should be made with multiple modes. inevitably adding the do9 clutches and the associated accessories. In this paper a PSCVT with single mode is conceptually designed A new continuously variable unit (CVU) consisting of the paired inner and outer spherical rotors is used. The CVU has large CSR and excellent compactness. As a PSD. a variable bridge (VB) using the Planetary gear units (PGUs) is considered because it has an upper bound on the power ratio. An optimal design to minimize the effective efficiency of the PSCVT is carried out. Through the performance analysis on the designed model, good expectation on the practicability in the heavy vehicle system is shown.

• 소성∙가공
• /
• 제14권3호
• /
• pp.233-238
• /
• 2005

Blow molding is divided into three categories, injection stretch blow molding, injection blow molding, and extrusion or direct blow molding. Extrusion blow molding has been studied experimentally to characterize the blowing behavior of parison. Blow conditions such as blowing temperature and cooling time were the experimental variables in this blowing experiment. Wall thickness of the lower part of blow molded sample was thicker than that of the upper part because of the sagging of parison during extrusion process. As temperature increases the wall thickness and the weight of blow molded sample decreased. No thickness variations in the blowing sample were observed according to the cooling time. The lower part of the sample showed high degree of crystallinity compare with the upper part of the sample. Thus the lower part of the sample was strong mechanically and structurally. It was recognized that the uniform wall thickness could not be obtained by only controlling the operational conditions. Parison variator should be introduced to get uniform wall thickness of parison and subsequently produce uniform wall thickness of blow molded product.

• 한국광학회지
• /
• 제9권3호
• /
• pp.134-141
• /
• 1998

원적외선인 7.6$\mu$m 과정대역에서 회절한계 성는을 만족하는 무초점 줌 망원경 광학계응 설계하였다. 기계보정식 4군 줌 방식을 적용하여 줌 대물부 설계하였으며 접안부는 고정초점 렌즈를 구성하였다. 망원경의 줌 비(zoom ratio)는 4.05로 배율을 2.0배에서 8.1배까지 연속적으로 가변할수 있으며, 총 5개의 렌즈군에 9매의 렌즈로 구성하였다. 줌 대물부는 F/1.3의 텔리포트 형태로 설계하여 최고배율 초점거리에 비해 광학계의 길이가 작아 시스템 적용성이 우수하도록 하였으며, 초점조절 렌즈를 줌밍 렌즈군의 뒤에 놓아 물체까지의 거리에 따라 초점을 조절하도록 설계하였다. 광학계에 사용된 재질은 색수차 보정을 위하여 대물부의 렌즈 1매만 ZnSe를 적용하고 나머지 헨즈는 모두 Ge을 적용하여\ulcorner며, 총 18면의 곡률중 1면만 비구면을 적용하고 나머지 면은 모주 구면을 적용하였다. 설계된 망원경의 8.1배율에서의 시야는 $\pm$2.31$^{\circ}$,대물부 유효구경은 163mm이며, 모든 배율에서 회절한계 성능을 만족하는 것으로 평가하였다.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.735-744
• /
• 2000

The electrical procerties and stability of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Er$_2$O$_3$ (ZPCCE) based varistors were investigated in the Er$_2$O$_3$content range of 0.0 to 4.0 mol%. ZPCCE ceramics containing 2.0 mol% Er$_2$O$_3$ exhibited the highest density of 5.74 g/㎤ corresponding to 99.3% of theoretical density. The varistors with 0.5 mol% and 2.0 mol% Er$_2$O$_3$exhibited a relatively satisfying nonlinearity, which the nonlinear exponent is 40.50 and 47.15, respectively and the leakage current is 2.66 $mutextrm{A}$, respectively. Under more severe d.c. stress, such as (0.80 V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$115$^{\circ}C$/12h)+(0.90 V$_{1mA}$12$0^{\circ}C$/12h)+(0.95 V$_{1mA}$1$25^{\circ}C$12h), they showed a very excellent stability, which the variation rate of the variator voltage is -0.89% and -0.15%, the variation rate of the nonlinear coefficient is -4.67% and -3.56%, and the variation rate of leakage current is -6.02% and -19.56%, respectively. It is surely bellived that ZnO-0.5 mol% Pr$_{6}$O$_{11}$-1.0 mol% CoO-0.5 mol% Cr$_2$O$_3$-x mol% Er$_2$O$_3$(x=0.5, 2.0) based varistors will be greatly contributed to develop the advanced Pr$_{6}$O$_{11}$-based ZnO varistors in future.uture. future.uture.