• 한국인터넷방송통신학회논문지
• /
• 제13권1호
• /
• pp.77-82
• /
• 2013

주기가 다른 격자들로 구성된 평면 DFB 도파로의 필터 특성들을 등가 전송선로 망을 사용하여 구현하였다. 대역 필터 특성과 공진 특성을 정확하게 분석하기 위하여 Floquet 이론과 Babinet 원리에 기초한 종방향 모드 전송선로 이론 (L-MTLT)을 제시하였다. 수치해석 결과, 본 논문에서 제시한 해석법은 주기가 다른 격자들로 구성된 DFB 도파로의 필터 특성들을 분석하기 위한 간단한 수치 해석적 알고리즘을 제공하였으며, DFB 필터의 대역폭과 사이드로브의 억압특성 각 영역에서의 격자개수와 격자 종횡비 (aspect ratio)에 민감하게 의존함을 보였다.

• 대한교통학회지
• /
• 제17권5호
• /
• pp.69-78
• /
• 1999

교통혼잡이 만연된 도로와 교통혼잡이 발생하지 않는 도로에서는 운전자의 통행행태가 서로 다르다. 교통혼잡이 만연된 도로의 운전자는 자신이 선택할 경로가 혼잡으로 인해 발생할 통행시간변화를 우선 고려하여 경로를 선택한다. 본 연구에서는 통행시간변화를 고려하는 운전자의 경로선택행위를 모사하기 위하여 통행시간신뢰도를 새롭게 정의하고 신뢰도 통행배정모형을 정립하였다. 통행시간신뢰도는 통행시간변화의 정도에 의해서 결정되는 함수이며, 통행시간변화는 도로용량과 교통량의 함수이다. 본 연구에서는 신뢰도 통행배정모형을 이용하여 통행시간신뢰도를 극대화하기 위해 경로를 선택하는 운전자의 통행행태를 모사하였고, 그 해가 Wardrop의 균형상태를 만족시킴을 증명하였다. 그리고 가상 가로망을 대상으로 기존의 통행시간 통행배정모형과 비교, 분석하였다.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.1-9
• /
• 2018

In this paper an efficient and simple refined shear deformation theory is presented for the free vibration of Functionally Graded Plates Under Various Boundary Conditions. The theory accounts for a quadratic variation of the transverse shear strains across the thickness, and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The number of independent unknowns of present theory is four, as against five in other shear deformation theories. The plates are considered of the type having two opposite sides simply-supported, and the two other sides having combinations of simply-supported, clamped, and free boundary conditions. The mechanical properties of functionally graded material are assumed to vary according to power law distribution of the volume fraction of the constituents. Equations of motion are derived using Hamilton's principle. The results of this theory are compared with those of other shear deformation theories. Various numerical results including the effect of boundary conditions, power-law index, plate aspect ratio, and side-to-thickness ratio on the free vibration of FGM plates are presented.

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.77-83
• /
• 2003

The finite element analysis was performed for the cracks existing in residual stress fields in order to investigate the effects of configuration of residual stress distribution to the fatigue crack opening behaviour. And the variation of stress distributions adjacent to the crack caused by uploading was examined. The finite element model with contact elements for the crack plane and plane stress elements for the base material and the analytical method based on the superposition principle to estimate crack opening behaviour and the stress distribution adjacent to the crack subjected to uploading were used. The results of the analysis showed that crack opening behaviors and variations of stress distribution caused by uploading were changed depending on the configuration of residual stress distribution. When the crack existed in the region of compressive residual stress and the configuration of compressive residual stress distribution were inclined, a partial crack opening just behind of a crack tip occurred during uploading. Based on the above results, it was clarified that the crack opening behaviour in the residual stress field could be predicted accurately by the finite element analysis using these analytical method and model.

• Journal of Korean Biological Nursing Science
• /
• 제20권2호
• /
• pp.122-131
• /
• 2018

Purpose: This study was conducted to ascertain the effectiveness of forest healing therapy by analyzing researches on forest healing therapy applied to Korean adults and to confirm that forest healing therapy can be used as a therapeutic intervention program for elderly nursing or rehabilitation nursing. Methods: We searched 972 research papers on forest therapy applied to Korean adults. We reviewed appropriate 25 research papers with experimental design among them in the final analysis. Results: Forest healing therapy had physiological and psychosocial effects. First of all, it showed physiological effects to reduce stress index such as heart rate variation. Forest therapy also improved melatonin level in blood of middle-aged women with menopause and increased alpha wave in electroencephalogram and decreased lipid level and superoxide dismutase in blood. Second, forest healing therapy showed psychosocial effects to reduce depression and to improve mental health. But the effects appeared differently depending on the implementing type, period of forest healing therapy, and the professionalism of therapists. Therefore, if forest healing therapy would be applied to nursing, it should be based on its key principle, in other words, its principle of action-interaction-response of forest healing therapy. Conclusion: The results of this study could be used to develop a forest healing program as an intervention of nursing.

• 전기학회논문지P
• /
• 제66권2호
• /
• pp.63-68
• /
• 2017

This paper proposes a new non-isolated DC conversion circuit topology of the voltage source coupled inductor series resonant high-frequency PFM controlled boost chopper type DC-DC power converter using two in one IGBT power module, which can efficiently operate under a principle of zero current soft switching for wide output regulation voltage setting ranges and wide fluctuation of the input DC side voltage as well as the load variation ranges. Its steady state operating principle and the output voltage regulation characteristics in the open-loop-based output voltage control scheme without PI controller loop are described and evaluated from theoretical and experimented viewpoints. Finally, in this paper the computer-aided simulation steady-state analysis and the experimental results are presented in order to prove the effectiveness and the validity of voltage regulation characteristics of the proposed series resonant zero current soft switching boost chopper type DC-DC power converter circuit using IGBTs which is based on simple pulse frequency modulation strategy more than, 20kHz.

• Journal of Communications and Networks
• /
• 제18권2호
• /
• pp.162-172
• /
• 2016

The placement of the complete baseband processing in a centralized pool results in high data rate requirement and inflexibility of the fronthaul network, which challenges the energy and cost effectiveness of the cloud radio access network (C-RAN). Recently, redesign of the C-RAN through functional split in the baseband processing chain has been proposed to overcome these challenges. This paper evaluates, by mathematical and simulation methods, different splits with respect to network level energy and cost efficiency having in the mind the expected quality of service. The proposed mathematical model quantifies the multiplexing gains and the trade-offs between centralization and decentralization concerning the cost of the pool, fronthaul network capacity and resource utilization. The event-based simulation captures the influence of the traffic load dynamics and traffic type variation on designing an efficient fronthaul network. Based on the obtained results, we derive a principle for fronthaul dimensioning based on the traffic profile. This principle allows for efficient radio access network with respect to multiplexing gains while achieving the expected users' quality of service.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.99-102
• /
• 2003

The electronic structure of ${\beta}-MnO_2$ having impurities in the site of Mn was theoretically investigated by $DV-X_{\alpha}$ (the discrete variation $X{\alpha}$) method, which is a sort of the first principle molecular orbital method using Hatre-Fock-Slater approximation. The used cluster model was $[Mn_{14}MO_{56}]^{-52}$ (M = transient metals). Madelung potential and spin polarization were considered for more exact calculations. As results of calculations, the energy levels of all electron included in the model were obtained. The energy band gap and positions of impurity levies were discussed in association with impurity 34 orbital that seriously affect electrical properties of $MnO_2$. It was shown that the energy band gap decreased with the increase of the atomic number of transient metal impurity.

• Advances in nano research
• /
• 제8권1호
• /
• pp.37-47
• /
• 2020

This work focuses on the behavior of non-local shear deformation beam theory for the vibration of functionally graded (FG) nanobeams with porosities that may occur inside the functionally graded materials (FG) during their fabrication, using the non-local differential constitutive relations of Eringen. For this purpose, the developed theory accounts for the higher-order variation of transverse shear strain through the depth of the nanobeam. The material properties of the FG nanobeam are assumed to vary in the thickness direction. The equations of motion are derived from Hamilton's principle. Analytical solutions are presented for a simply supported FG nanobeam with porosities. The validity of this theory is verified by comparing some of the present results with other higher-order theories reported in the literature, the influence of material parameters, the volume fraction of porosity and the thickness ratio on the behavior mechanical P-FGM beam are represented by numerical examples.

• Steel and Composite Structures
• /
• 제32권5호
• /
• pp.595-610
• /
• 2019

This paper deals with the static and dynamic behavior of Functionally Graded Carbon Nanotubes (FG-CNT)-reinforced porous sandwich (PMPV) polymer plate. The model of nanocomposite plate is investigated within the first order shear deformation theory (FSDT). Two types of porous sandwich plates are supposed (sandwich with face sheets reinforced / homogeneous core and sandwich with homogeneous face sheets / reinforced core). Functionally graded Carbon Nanotubes (FG-CNT) and uniformly Carbon Nanotubes (UD-CNT) distributions of face sheets or core porous plates with uniaxially aligned single-walled carbon nanotubes are considered. The governing equations are derived by using Hamilton's principle. The solution for bending and vibration of such type's porous plates are obtained. The detailed mathematical derivations are provided and the solutions are compared to some cases in the literature. The effect of the several parameters of reinforced sandwich porous plates such as aspect ratios, volume fraction, types of reinforcement, number of modes and thickness of plate on the bending and vibration analyses are studied and discussed. On the question of porosity, this study found that there is a great influence of their variation on the static and vibration of porous sandwich plate.